---
title: "M20 Wedge Anchors (Through-Bolt) Dimensions"
description: "M20 Wedge Anchors (Through-Bolt): coarse thread pitch 2.5 mm. Full size chart to Trade series (torque-controlled expansion anchor) with tolerances."
url: https://engineeringhardware.com/guide/size/m20-wedge-anchors/
source: Engineering Hardware & Fasteners
---

# M20 Wedge Anchors (Through-Bolt) Dimensions

Anchors & Concrete Fixings · Trade series (torque-controlled expansion anchor)

Controlling dimensions to Trade series (torque-controlled expansion anchor), with tolerances and fit.

M20 Wedge Anchors (Through-Bolt) dimensions to Trade series (torque-controlled expansion anchor): coarse thread pitch 2.5 mm.

- **Coarse thread pitch:** 2.5 mm

Figures are nominal values from the governing standard. Confirm against the tolerance class for your application before machining or ordering.

![M20 Wedge Anchors (Through-Bolt) Dimensions reference image](https://engineeringhardware.com/wp-content/uploads/2026/08/Wedge-Anchors.webp)

Dimensional data for M20 Wedge Anchors (Through-Bolt) to Trade series (torque-controlled expansion anchor), with the installation notes for this type.

Values are taken from the governing standard rather than from a general machine-thread table, because this type is not selected on one.

## M20 Dimensional Row (Trade series (torque-controlled expansion anchor))

| Thread size | Drill hole diameter (mm) | Embedment depth (mm) | Overall length (mm) | Max fixture thickness (mm) | Setting | Material | Base material |
| --- | --- | --- | --- | --- | --- | --- | --- |
| M20 | 20 | 90 | 180 | 35 | Torque-controlled | Hot-dip galvanised | Cracked / uncracked concrete |

Custom manufacturing · Made to drawing

## Need wedge anchors (through-bolt) in a size this table does not list?

This page covers M20 wedge anchors (through-bolt). Length and corrosion protection are the usual specials. The load a fixing will take is decided by the concrete and the edge distance, not by ordering a longer anchor. Made by hot forging or thread rolling.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

[Custom anchor & concrete fixing manufacturing](https://engineeringhardware.com/custom/anchors/)[Send a drawing](https://engineeringhardware.com/custom/anchors/#rfq)

## Technical Drawing

Dimensioned line drawing of M20 Wedge Anchors (Through-Bolt) to Trade series (torque-controlled expansion anchor). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.

- **Drill hole diameter (mm):** 20
- **Embedment depth (mm):** 90
- **Overall length (mm):** 180
- **Max fixture thickness (mm):** 35
- **Setting:** Torque-controlled
- **Material:** Hot-dip galvanised
- **Base material:** Cracked / uncracked concrete

## Dimensions & Specifications (Trade series (torque-controlled expansion anchor))

| Thread size | Drill hole diameter (mm) | Embedment depth (mm) | Overall length (mm) | Max fixture thickness (mm) | Setting | Material | Base material |
| --- | --- | --- | --- | --- | --- | --- | --- |
| M8 | 8 | 40 | 75 | 15 | Torque-controlled | Zinc plated steel | Cracked / uncracked concrete |
| M10 | 10 | 50 | 95 | 20 | Torque-controlled | Zinc plated steel | Cracked / uncracked concrete |
| M12 | 12 | 60 | 110 | 25 | Torque-controlled | Zinc plated steel | Cracked / uncracked concrete |
| M16 | 16 | 75 | 145 | 30 | Torque-controlled | Zinc plated steel | Cracked / uncracked concrete |
| M20 | 20 | 90 | 180 | 35 | Torque-controlled | Hot-dip galvanised | Cracked / uncracked concrete |

Product catalog

## Related Wedge & Stud Anchors products

[![Stainless Steel 304 SS316 Expansion Anchor M6 M8 M10 M12 Wedge Anchor](https://img.engineeringhardware.com/Stainless-Steel-304-SS316-Expansion-Anchor-M6-M8-M10-M12-Wedge-Anchor.webp)](https://engineeringhardware.com/product/stainless-steel-304-ss316-expansion-anchor-m6-m8-m10-m12-wedge-anchor/)

Wedge & Through-Bolt Anchors

### [Stainless Steel 304 SS316 Expansion Anchor M6 M8 M10 M12 Wedge Anchor](https://engineeringhardware.com/product/stainless-steel-304-ss316-expansion-anchor-m6-m8-m10-m12-wedge-anchor/)

Expansion Anchor Bolt · ANSI, BSW, DIN, GB, ASME

**US$0.012 – 0.12**MOQ 1,000 pieces

[![High Strength Versatile Thread Wedge Anchor Water Resistant Fastener](https://img.engineeringhardware.com/High-Strength-Versatile-Thread-Wedge-Anchor-Water-Resistant-Fastener.webp)](https://engineeringhardware.com/product/high-strength-versatile-thread-wedge-anchor-water-resistant-fastener/)

Wedge & Through-Bolt Anchors

### [High Strength Versatile Thread Wedge Anchor Water Resistant Fastener](https://engineeringhardware.com/product/high-strength-versatile-thread-wedge-anchor-water-resistant-fastener/)

Round Head · Carbon Steel ,SS304 SS316

**US$0.012 – 0.06**MOQ 50,000 pieces

[![Type Expansion Wedge Anchor Bolts A2 A4 50-200mm Long Heavy Duty Dowels](https://img.engineeringhardware.com/Type-Expansion-Wedge-Anchor-Bolts-A2-A4-50-200mm-Long-Heavy-Duty-Dowels.webp)](https://engineeringhardware.com/product/type-expansion-wedge-anchor-bolts-a2-a4-50-200mm-long-heavy-duty-dowels/)

Wedge & Through-Bolt Anchors

### [Type Expansion Wedge Anchor Bolts A2 A4 50-200mm Long Heavy Duty Dowels](https://engineeringhardware.com/product/type-expansion-wedge-anchor-bolts-a2-a4-50-200mm-long-heavy-duty-dowels/)

Bonded Anchor Bolt · ANSI, BSW, DIN, GB, GOST

**US$1.20 – 12.00**MOQ 1,000 pieces

[![Galvanized Steel Wedge Anchor Expansion Fixing Bolt Sleeve Anchors M6 M8 M12 M16 With Nut and Washer](https://img.engineeringhardware.com/Galvanized-Steel-Wedge-Anchor-Expansion-Fixing-Bolt-Sleeve-Anchors-M6-M8-M12-M16-With-Nut-and-Washer.webp)](https://engineeringhardware.com/product/galvanized-steel-wedge-anchor-expansion-fixing-bolt-sleeve-anchors-m6-m8-m12-m16/)

Wedge & Through-Bolt Anchors

### [Galvanized Steel Wedge Anchor Expansion Fixing Bolt Sleeve Anchors M6 M8 M12 M16 With Nut and Washer](https://engineeringhardware.com/product/galvanized-steel-wedge-anchor-expansion-fixing-bolt-sleeve-anchors-m6-m8-m12-m16/)

Silver · Zinc-Plated,Galvanized

**US$0.012 – 0.036**MOQ 500 pieces

[![Stainless Steel Wedge Anchor Bolt for Curtain Wall Stone Cladding Fixing](https://img.engineeringhardware.com/Stainless-Steel-Wedge-Anchor-Bolt-for-Curtain-Wall-Stone-Cladding-Fixing.webp)](https://engineeringhardware.com/product/stainless-steel-wedge-anchor-bolt-for-curtain-wall-stone-cladding-fixing/)

Wedge & Through-Bolt Anchors

### [Stainless Steel Wedge Anchor Bolt for Curtain Wall Stone Cladding Fixing](https://engineeringhardware.com/product/stainless-steel-wedge-anchor-bolt-for-curtain-wall-stone-cladding-fixing/)

DIN · Stainless Steel

**US$0.32 – 0.94**MOQ 2,500 pieces

[![Secure Fixing Wedge Anchor Featuring Galvanized Steel Material for Masonry Applications](https://img.engineeringhardware.com/Secure-Fixing-Wedge-Anchor-Featuring-Galvanized-Steel-Material-for-Masonry-Applications.webp)](https://engineeringhardware.com/product/secure-fixing-wedge-anchor-featuring-galvanized-steel-material-for-masonry/)

Wedge & Through-Bolt Anchors

### [Secure Fixing Wedge Anchor Featuring Galvanized Steel Material for Masonry Applications](https://engineeringhardware.com/product/secure-fixing-wedge-anchor-featuring-galvanized-steel-material-for-masonry/)

Concrete Screw Anchor · Alloy Steel

**US$1.20 – 12.00**MOQ 1,000 pieces

[View all Wedge & Through-Bolt Anchors →](https://engineeringhardware.com/fastener-products/anchors-construction-fixings/wedge-through-bolt-anchors/) [Full product catalog](https://engineeringhardware.com/products/)

## Materials & Grades

Select a material class to see the grades we supply it in. Each designation is listed with its ISO/EN, AISI/SAE, JIS and GB equivalents.

Stainless Steel38 Carbon Steel66 Alloy Steel41 Bearing Steel5 Spring Steel25 Aluminum and Aluminum Alloys21 Brass17 Bronze11 Copper8 Titanium and Titanium Alloys18 Nickel and Nickel Alloys22 Iron-Nickel and High-Temperature Alloys10 Tool Steel and Specialty Hardened Steel9 Structural and Construction Steel9

### Stainless Steel

#### Austenitic Stainless Steel

- A1 AISI 303 · SAE 303 · SUS303 · EN 1.4305 · X8CrNiS18-9
- A2 AISI 304 · SAE 304 · SUS304 · EN 1.4301 · X5CrNi18-10 · 06Cr19Ni10
- 304L AISI 304L · SUS304L · EN 1.4307 · X2CrNi18-9 · 022Cr19Ni10
- 302 AISI 302 · SUS302 · EN 1.4310
- 305 AISI 305 · SUS305 · EN 1.4303
- A4 AISI 316 · SAE 316 · SUS316 · EN 1.4401 · X5CrNiMo17-12-2 · 06Cr17Ni12Mo2
- 316L AISI 316L · SUS316L · EN 1.4404 · X2CrNiMo17-12-2 · 022Cr17Ni12Mo2
- 321 AISI 321 · SUS321 · EN 1.4541 · X6CrNiTi18-10
- 310 / 310S AISI 310 · AISI 310S · SUS310S · EN 1.4845
- 302HQ AISI 302HQ
- A3
- A5
- 347 AISI 347 · SUS347 · EN 1.4550 · X6CrNiNb18-10
- 309 / 309S AISI 309 · AISI 309S · SUS309S

#### Martensitic Stainless Steel

- AISI 410 SUS410 · EN 1.4006 · X12Cr13 · 12Cr13
- AISI 420 SUS420J1 · SUS420J2 · EN 1.4021 · EN 1.4028 · 20Cr13 · 30Cr13
- AISI 431 SUS431 · EN 1.4057 · X17CrNi16-2
- C1
- C3
- C4
- AISI 440A
- AISI 440B
- AISI 440C SUS440C · EN 1.4125

#### Ferritic Stainless Steel

- AISI 430 SUS430 · EN 1.4016 · X6Cr17 · 10Cr17
- F1
- AISI 434
- AISI 444

#### Precipitation-Hardening Stainless Steel

- 17-4 PH AISI 630 · UNS S17400 · SUS630 · EN 1.4542 · X5CrNiCuNb16-4
- 15-5 PH UNS S15500
- 17-7 PH UNS S17700

#### Duplex and Super Duplex Stainless Steel

- Duplex 2205 UNS S31803 · UNS S32205 · EN 1.4462
- Super Duplex 2507 UNS S32750 · EN 1.4410
- D2
- D4
- D6
- D8
- Lean Duplex 2101 UNS S32101
- Super Duplex S32760 UNS S32760 · EN 1.4501

### Carbon Steel

#### Low-Carbon Steel

- SAE 1006
- SAE 1008
- SAE 1010
- SAE 1018
- SAE 1020
- Q195
- Q235
- SAE 1012
- SAE 1015
- Q215
- ML08
- ML08Al
- ML10
- ML15
- ML20
- SWRCH6A
- SWRCH8A
- SWRCH10A
- SWRCH12A
- SWRCH15A
- SWRCH18A

#### Medium-Carbon Steel

- SAE 1035
- SAE 1045
- S45C
- C45
- SAE 1030
- SAE 1040
- SAE 1050
- 30
- 35
- 40
- 45
- 50
- S35C
- S40C
- S50C
- C35
- C40

#### High-Carbon Steel

- SAE 1060
- SAE 1070
- 65Mn
- SAE 1065
- SAE 1075
- SAE 1080
- SAE 1085
- SAE 1090
- SAE 1095
- 60
- 65
- 70
- 75
- 80
- 85

#### Cold-Heading Steel

- SWRCH22A
- 10B21
- SWRCH22K
- SWRCH25K
- SWRCH30K
- SWRCH35K
- SWRCH40K
- ML20Mn
- ML25
- ML30
- ML35
- ML40
- 15B25

### Alloy Steel

#### Chromium Steel

- 40Cr
- 45Cr
- AISI 5140
- SAE 5140
- AISI 5120
- SAE 5120
- SCr420
- SCr440

#### Chromium-Molybdenum Steel

- 35CrMo
- 42CrMo
- AISI 4140
- SCM435
- SCM440
- 42CrMo4
- 30CrMo
- AISI 4130
- SAE 4130
- SAE 4140
- AISI 4142
- AISI 4145
- SCM415
- SCM420
- SCM445
- EN 1.7220
- EN 1.7225
- 25CrMo4
- 34CrMo4

#### Nickel-Chromium-Molybdenum Steel

- AISI 4340
- SAE 4340
- 40CrNiMo
- SNCM439
- EN 1.6511
- 36CrNiMo4

#### Boron Alloy Steel

- 10B22
- 10B21
- 15B21
- 15B25
- 20MnTiB
- 20Mn2B
- 35VB
- 40MnB

### Bearing Steel

#### Bearing Steel

- GCr15
- AISI 52100 SAE 52100 · UNS G52986
- SUJ2
- 100Cr6 EN 1.3505
- GCr15SiMn

### Spring Steel

#### Carbon Spring Steel

- SAE 1065
- SAE 1070
- SAE 1075
- SAE 1080
- SAE 1095
- 65
- 70
- 75
- 80
- 65Mn

#### Silicon-Manganese Spring Steel

- 60Si2Mn
- 60Si2MnA
- SUP6
- SUP7

#### Chromium-Vanadium Spring Steel

- 50CrVA
- SAE 6150
- AISI 6150
- SUP10

#### Stainless Spring Steel

- AISI 301
- SUS301
- EN 1.4310
- AISI 302
- AISI 304
- AISI 316
- 17-7 PH

### Aluminum and Aluminum Alloys

#### Commercially Pure Aluminum

- 1050
- 1060
- 1070
- 1100

#### 2xxx Series Aluminum

- 2024
- 2011
- 2014
- 2017

#### 5xxx Series Aluminum

- 5052
- 5083
- 5754

#### 6xxx Series Aluminum

- 6061
- 6061-T6
- 6063
- 6082
- 6082-T6

#### 7xxx Series Aluminum

- 7075
- 7075-T6
- 7005
- 7050
- 7075-T73

### Brass

#### Free-Cutting Brass

- C36000
- H62
- HPb59-1
- C3601
- C3602
- C3604
- CuZn36Pb3
- CuZn39Pb3
- EN CW614N
- EN CW617N
- H65

#### Lead-Free Brass

- C69300
- C27450
- CW510L
- CW511L

#### Naval Brass

- C46400
- CuZn39Sn1

### Bronze

#### Silicon Bronze

- C65500
- C65100
- C65600

#### Phosphor Bronze

- C51000
- C52100
- CuSn6
- CuSn8

#### Aluminum Bronze

- C95400
- C95500
- C63000
- CuAl10Ni5Fe4

### Copper

#### Copper

- C11000
- T2
- C10100
- C10200
- C12200
- T1
- TU1
- TU2

### Titanium and Titanium Alloys

#### Commercially Pure Titanium

- Grade 2
- Grade 1
- Grade 3
- Grade 4
- TA1
- TA2
- TA3

#### Alpha-Beta Titanium Alloys

- Grade 5
- Ti-6Al-4V
- TC4
- UNS R56400

#### Low-Interstitial Grade

- Grade 23
- Ti-6Al-4V ELI
- UNS R56407

#### Other Titanium Fastener Alloys

- Ti-6Al-6V-2Sn
- Ti-6Al-2Sn-4Zr-2Mo
- Beta-C titanium
- Ti-10V-2Fe-3Al

### Nickel and Nickel Alloys

#### Commercially Pure Nickel

- Nickel 200
- UNS N02200
- Nickel 201
- UNS N02201

#### Inconel Alloys

- Inconel 625 UNS N06625
- Inconel 718 UNS N07718
- Inconel 600 UNS N06600
- Inconel 601 UNS N06601
- Inconel 686 UNS N06686
- Inconel X-750 UNS N07750

#### Monel Alloys

- Monel 400 UNS N04400
- Monel K-500 UNS N05500

#### Hastelloy Alloys

- Hastelloy C-276 UNS N10276
- Hastelloy C-22 UNS N06022
- Hastelloy B-2 UNS N10665
- Hastelloy B-3 UNS N10675
- Hastelloy X UNS N06002

#### Other Nickel Alloys

- Alloy 20 UNS N08020
- Alloy 625
- Alloy 718
- Alloy 825 UNS N08825
- Alloy 925 UNS N09925

### Iron-Nickel and High-Temperature Alloys

#### A286

- A-286
- UNS S66286
- EN 1.4980

#### Invar

- Invar 36
- Alloy 36
- UNS K93600
- FeNi36

#### Alloy 42

- Alloy 42
- UNS K94100
- FeNi42

### Tool Steel and Specialty Hardened Steel

#### Tool Steel and Specialty Hardened Steel

- AISI D2
- AISI H13
- SKD11
- Cr12MoV
- AISI O1
- AISI A2
- AISI S7
- SKD61
- 9CrSi

### Structural and Construction Steel

#### Structural and Construction Steel

- ASTM A36
- Q235B
- Q355B
- S355JR
- Q235C
- Q355C
- S235JR
- S275JR
- S355J2

## Applications & Industries for M20 Wedge Anchors

Wedge Anchors are bought for a small number of well-defined jobs. These are the ones we ship them for. Stocked from M8 to M20.

### Industries that specify Wedge Anchors

- **Machine hold-down:** Anchoring plant that transmits vibration into the floor.
- **Safety barriers & racking:** Bollards, guard rail and pallet racking feet.
- **Structural steel to concrete:** Column base plates and bracket fixings in a concrete slab.
- **Fit-out & drylining:** Fixings into board, block and hollow wall.
- **Construction & structural:** Base plates, brackets and steelwork fixed to concrete.
- **Building services:** Suspending tray, duct, pipe and sprinkler runs from a soffit.

### Typical applications

- set by tightening the nut to a stated setting torque
- hole diameter equals the anchor diameter
- through-fixing a steel fixture into concrete
- fixing a steel fixture through to a solid substrate
- suspended services on threaded rod
- making a load-bearing threaded fixing in concrete or masonry

### Service conditions to specify against

- **Marine and coastal:** Available in A4 (316) stainless for chloride exposure — coastal structures, pool halls, water treatment and deck hardware, where A2 will eventually pit.
- **Exterior structural:** Hot-dip galvanised options for external steelwork; allow for the thicker coating in the mating thread.
- **Hole preparation:** Drilled diameter, depth and cleanliness are part of the specification; an uncleaned hole is the single most common cause of a failed anchor.
- **The concrete governs:** Capacity is a property of the base material and the geometry — grade, edge distance, spacing and cracked or uncracked — not of the anchor alone. Work to the anchor manufacturer's ETA or ICC-ES report.

### Where to use something else

- Not for a substrate the type is not qualified in — an expansion anchor near an edge or in hollow block will split it.

[Full application guide: where Wedge Anchors are used, how to specify them, and the cases they are wrong for](https://engineeringhardware.com/applications/wedge-anchors/)

Inside the plant

## Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift.
2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g.
3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1.
4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227.

## Frequently Asked Questions

### What is the coarse-thread pitch of M20 for Wedge Anchors (Through-Bolt)?

For M20 the standard coarse pitch is 2.5 mm — this is the value used for Wedge Anchors (Through-Bolt).

### What clearance and tapping drill suit M20?

Use a 22 mm clearance hole (ISO 273 medium) for through-fixing, or a 17.5 mm tapping drill for a coarse M20 thread.

### Should M20 Wedge Anchors (Through-Bolt) be tightened by torque or by angle?

For critical structural joints at M20, angle-controlled or stretch-controlled tightening is more repeatable than pure torque — the friction scatter at large diameters can dominate the torque signal.

### What grip range is typical for M20 structural bolts?

Grip ranges are highly application-dependent at M20. As a guide, choose a length that gives at least 1× the thread diameter engagement in the nut plus 2–3 thread pitches projecting.

### How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.

## Related Pages

[View the full Wedge Anchors (Through-Bolt) page](https://engineeringhardware.com/fastener/wedge-anchors/)

### More Wedge Anchors (Through-Bolt) Guides