This page covers M6 Wedge / Taper Washer to GB/T 852. M6 is the nominal bolt size; the dimensional row below is reproduced from the product table, followed by the tolerance, material and selection notes that apply to this size.
M6 Dimensional Row (GB/T 852)
For bolt size
Inner diameter d1 (mm)
Outer diameter d2 (mm)
Mean thickness t (mm)
Slope
Reference standard
M6
6.5
13
2.4
1:6
DIN 6917 / GB/T 853
Common Applications for M6 Wedge / Taper Washer — GB/T 852 (Series 084)
M6 Wedge / Taper Washer — GB/T 852 (Series 084) are commonly specified for general-purpose load-spreading and locking under machine bolts.
Mating Parts for M6
A M6 flat washer pairs with a M6 bolt/screw and matching M6 nut.
Technical Drawing
Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.
Sends the selected values to the quote form below.
Request a Quote
The form below follows the current technical drawing configuration. Change the drawing values above and the request details update automatically.
Dimensions & Specifications (GB/T 852)
For bolt size
Inner diameter d1 (mm)
Outer diameter d2 (mm)
Mean thickness t (mm)
Slope
Reference standard
M3
3.5
6
1.2
1:6
DIN 6917 / GB/T 853
M4
4.5
8
1.6
1:6
DIN 6917 / GB/T 853
M5
5.5
11
2.0
1:6
DIN 6917 / GB/T 853
M6
6.5
13
2.4
1:6
DIN 6917 / GB/T 853
M8
8.5
17
3.2
1:6
DIN 6917 / GB/T 853
M10
10.5
22
4.0
1:6
DIN 6917 / GB/T 853
M12
12.5
26
4.8
1:6
DIN 6917 / GB/T 853
M14
14.5
30
5.6
1:6
DIN 6917 / GB/T 853
M16
16.5
35
6.4
1:6
DIN 6917 / GB/T 853
M18
18.5
39
7.2
1:6
DIN 6917 / GB/T 853
Materials & Grades
Select a material class to see the grades we supply it in. Each designation is listed with its ISO/EN, AISI/SAE, JIS and GB equivalents.
Third-party video, selected automatically for this topic. It is not produced by Engineering Hardware and is not a specification source — use the tables on this page for dimensional data.
Inside the plant
Manufactured in our own plant
This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.
01
Cold heading
Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail.
Head dimensions and under-head radius checked at set-up and per shift.
02
Thread rolling
Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch.
Go / no-go ring gauges to ISO 965 tolerance class 6g.
03
Heat treatment
Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it.
Core hardness and tensile tested per lot to ISO 898-1.
04
Surface treatment
Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list.
Coating thickness and neutral salt spray hours to ISO 9227.
Frequently Asked Questions
What is the coarse-thread pitch of M6 for Wedge / Taper Washer — GB/T 852 (Series 084)?
For M6 the standard coarse pitch is 1 mm — this is the value used for Wedge / Taper Washer — GB/T 852 (Series 084).
What clearance and tapping drill suit M6?
Use a 6.6 mm clearance hole (ISO 273 medium) for through-fixing, or a 5 mm tapping drill for a coarse M6 thread.
Which washer dimensions matter most for M6?
For a flat washer, the outside diameter (the bearing surface) and the thickness control how the load is spread under the head and how much elastic preload is preserved. The inside diameter must clear the bolt body but not be so large that the head bears mostly on the washer's outer rim.
How do I request a quotation?
Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.
This website uses only necessary and functional cookies to operate, secure, and improve basic website performance.
We do not use advertising cookies, Google Analytics, or cross-site tracking technologies.
Privacy Policy
