M6 Hex Flange Nuts are manufactured to ISO 4161 / DIN 6923 with a coarse thread pitch of 1 mm. This page lists the controlling dimensions for the M6 size — head geometry, width across flats, matching spanner size — together with the clearance hole, tapping drill and tightening torque used at assembly.
M6 Dimensional Row (ISO 4161 / DIN 6923)
| Size | Pitch (mm) | Flange diameter dc (mm) | Nut height m (mm) | Width across flats s (mm) | Reference standard |
|---|---|---|---|---|---|
| M6 | 1.0 | 14.2 | 6.0 | 10.0 | ISO 4161 / DIN 6923 |
Spanner & Drive for M6 Hex Flange Nuts
M6 Hex Flange Nuts have a width across flats of 10.0 mm — fit a 10.0 mm open-ended spanner or socket. Use a 6-point socket for tight clearances and to reduce rounding; for repeated assembly choose a torque wrench so the joint preload is repeatable.
Common Applications for M6 Hex Flange Nuts
M6 Hex Flange Nuts are commonly specified for general-purpose joints in machinery, fixturing and equipment frames.
Mating Parts for M6
Pair M6 with the matching M6 bolt or screw, plus a M6 flat washer where required to distribute load on softer materials.
When to Step Up or Down from M6
When the joint preload approaches the proof load of M6 class 8.8, step up to M8 class 8.8 (or move to M6 class 10.9). When the joint is over-specified, M5 often saves weight and cost without losing the safety margin.