DIN 6798 is the governing dimensional standard for serrated lock washers. This page sets out the scope of the standard, reproduces the full size table it specifies, and lists the DIN/ISO/ASME cross-references commonly cited in datasheets and drawings.
DIN 6798 — Scope
DIN 6798 specifies the dimensions and tolerances of serrated lock washers. Material, property class, surface finish and packaging are governed by separate documents in the same standards family (for example ISO 898-1 for the mechanical property classes of bolts and screws).
Tolerance & Product Grades
DIN 6798, alongside the related DIN 6798 entries on this site, specifies product grades (typically A or B for fine work and C for general engineering) and tolerance classes for the controlling dimensions. Choose the grade against the precision your application requires.
Dimensions Specified by DIN 6798
| For size | Inner diameter d1 (mm) | Outer diameter d2 (mm) | Thickness h (mm) | Type | Reference standard |
|---|---|---|---|---|---|
| M3 | 3.2 | 6.0 | 0.5 | Internal-tooth type A | DIN 6798 A/J |
| M4 | 4.3 | 7.6 | 0.5 | Internal-tooth type A | DIN 6798 A/J |
| M5 | 5.3 | 9.2 | 0.6 | Internal-tooth type A | DIN 6798 A/J |
| M6 | 6.4 | 11.0 | 0.7 | Internal-tooth type A | DIN 6798 A/J |
| M8 | 8.4 | 14.8 | 0.8 | Internal-tooth type A | DIN 6798 A/J |
| M10 | 10.5 | 18.0 | 0.9 | Internal-tooth type A | DIN 6798 A/J |
| M12 | 13.0 | 21.5 | 1.0 | Internal-tooth type A | DIN 6798 A/J |
| M16 | 17.0 | 27.0 | 1.2 | Internal-tooth type A | DIN 6798 A/J |
| M20 | 21.0 | 33.0 | 1.5 | Internal-tooth type A | DIN 6798 A/J |
| M3 | 3.2 | 7.0 | 0.5 | External-tooth type J | DIN 6798 A/J |
| M4 | 4.3 | 9.0 | 0.5 | External-tooth type J | DIN 6798 A/J |
| M5 | 5.3 | 10.0 | 0.6 | External-tooth type J | DIN 6798 A/J |
| M6 | 6.4 | 12.0 | 0.7 | External-tooth type J | DIN 6798 A/J |
| M8 | 8.4 | 15.0 | 0.8 | External-tooth type J | DIN 6798 A/J |
| M10 | 10.5 | 19.0 | 0.9 | External-tooth type J | DIN 6798 A/J |
| M12 | 13.0 | 22.0 | 1.0 | External-tooth type J | DIN 6798 A/J |
| M16 | 17.0 | 28.0 | 1.2 | External-tooth type J | DIN 6798 A/J |
| M20 | 21.0 | 34.0 | 1.5 | External-tooth type J | DIN 6798 A/J |
Companion Standards
DIN 6798 controls only the geometry of serrated lock washers. The mechanical strength is set by ISO 898-1 (bolts and screws) or ISO 898-2 (nuts); the surface finish is governed by separate finish standards (e.g. ISO 4042 for electroplating). For corrosion testing, the relevant document is ISO 9227 (neutral salt spray).
When to Specify DIN 6798
DIN 6798 is still widely used in European mechanical engineering and as a cross-reference on legacy drawings; its ISO equivalent is preferred for new designs.