Specification summary of DIN 6921 as applied to hex flange bolts: the dimensions the standard controls, the tolerance and product grades it defines, the full specified size range, and the equivalent DIN/ISO/ASME designations.
DIN 6921 — Scope
DIN 6921 specifies the dimensions and tolerances of hex flange bolts. Material, property class, surface finish and packaging are governed by separate documents in the same standards family (for example ISO 898-1 for the mechanical property classes of bolts and screws).
Tolerance & Product Grades
DIN 6921, alongside the related ISO 1665 / DIN 6921 entries on this site, specifies product grades (typically A or B for fine work and C for general engineering) and tolerance classes for the controlling dimensions. Choose the grade against the precision your application requires.
Dimensions Specified by DIN 6921
| Size | Pitch (mm) | Flange diameter dc (mm) | Head height k (mm) | Width across flats s (mm) | Reference standard |
|---|---|---|---|---|---|
| M5 | 0.8 | 11.8 | 4.7 | 8.0 | ISO 1665 / DIN 6921 |
| M6 | 1.0 | 14.2 | 5.6 | 10.0 | ISO 1665 / DIN 6921 |
| M8 | 1.25 | 17.9 | 7.2 | 13.0 | ISO 1665 / DIN 6921 |
| M10 | 1.5 | 21.8 | 8.9 | 15.0 | ISO 1665 / DIN 6921 |
| M12 | 1.75 | 26.0 | 10.7 | 18.0 | ISO 1665 / DIN 6921 |
| M14 | 2.0 | 29.9 | 12.3 | 21.0 | ISO 1665 / DIN 6921 |
| M16 | 2.0 | 34.5 | 14.1 | 24.0 | ISO 1665 / DIN 6921 |
| M20 | 2.5 | 42.8 | 17.5 | 30.0 | ISO 1665 / DIN 6921 |
| M24 | 3.0 | 51.1 | 21.0 | 36.0 | ISO 1665 / DIN 6921 |
Companion Standards
DIN 6921 controls only the geometry of hex flange bolts. The mechanical strength is set by ISO 898-1 (bolts and screws) or ISO 898-2 (nuts); the surface finish is governed by separate finish standards (e.g. ISO 4042 for electroplating). For corrosion testing, the relevant document is ISO 9227 (neutral salt spray).
When to Specify DIN 6921
DIN 6921 is still widely used in European mechanical engineering and as a cross-reference on legacy drawings; its ISO equivalent is preferred for new designs.