Self-Tapping Screws manufactured to DIN 7976 are dimensioned by the size table reproduced on this page. The standard fixes geometry and tolerances only; material and property class are assigned by ISO 898-1/898-2, and surface finish by separate finish standards.
DIN 7976 — Scope
DIN 7976 specifies the dimensions and tolerances of self-tapping screws. Material, property class, surface finish and packaging are governed by separate documents in the same standards family (for example ISO 898-1 for the mechanical property classes of bolts and screws).
Tolerance & Product Grades
DIN 7976, alongside the related DIN 7976 / ISO 1481 entries on this site, specifies product grades (typically A or B for fine work and C for general engineering) and tolerance classes for the controlling dimensions. Choose the grade against the precision your application requires.
Dimensions Specified by DIN 7976
| Size | Nominal diameter (mm) | Pilot hole (mm) | Pitch (mm) | Head diameter dk (mm) | Head height k (mm) | Plate thickness (mm) | Reference standard | Notes |
|---|---|---|---|---|---|---|---|---|
| ST2.2 | 2.2 | 1.7 | 0.71 | 4.2 | 1.4 | 0.5~1.0 | DIN 7976 / ISO 1481 | Cross-recess pan-head self-tapping |
| ST2.9 | 2.9 | 2.3 | 0.94 | 5.6 | 1.7 | 0.6~1.6 | DIN 7976 / ISO 1481 | Cross-recess pan-head self-tapping |
| ST3.5 | 3.5 | 2.8 | 1.27 | 6.9 | 2.1 | 0.8~2.0 | DIN 7976 / ISO 1481 | Cross-recess pan-head self-tapping |
| ST3.9 | 3.9 | 3.1 | 1.29 | 7.5 | 2.3 | 0.9~2.5 | DIN 7976 / ISO 1481 | Cross-recess pan-head self-tapping |
| ST4.2 | 4.2 | 3.4 | 1.41 | 8.2 | 2.5 | 1.0~2.5 | DIN 7976 / ISO 1481 | Cross-recess pan-head self-tapping |
| ST4.8 | 4.8 | 3.9 | 1.59 | 9.5 | 2.9 | 1.2~3.0 | DIN 7976 / ISO 1481 | Cross-recess pan-head self-tapping |
| ST5.5 | 5.5 | 4.5 | 1.81 | 10.9 | 3.3 | 1.5~3.5 | DIN 7976 / ISO 1481 | Cross-recess pan-head self-tapping |
| ST6.3 | 6.3 | 5.1 | 1.81 | 12.5 | 3.8 | 2.0~4.0 | DIN 7976 / ISO 1481 | Cross-recess pan-head self-tapping |
| ST8.0 | 8.0 | 6.7 | 2.12 | 16.0 | 4.8 | 2.5~5.0 | DIN 7976 / ISO 1481 | Cross-recess pan-head self-tapping |
| ST9.5 | 9.5 | 8.0 | 2.12 | 19.0 | 5.7 | 3.0~6.0 | DIN 7976 / ISO 1481 | Cross-recess pan-head self-tapping |
Equivalent Standards
Where direct equivalents exist (ISO ↔ DIN, ISO ↔ ASME), they are listed on the parent Self-Tapping Screws page. Always confirm against the dimensions on this page, since some "equivalent" standards differ in tolerances and head geometry.
Companion Standards
DIN 7976 controls only the geometry of self-tapping screws. The mechanical strength is set by ISO 898-1 (bolts and screws) or ISO 898-2 (nuts); the surface finish is governed by separate finish standards (e.g. ISO 4042 for electroplating). For corrosion testing, the relevant document is ISO 9227 (neutral salt spray).