Pan Head Screws manufactured to DIN 7985 are dimensioned by the size table reproduced on this page. The standard fixes geometry and tolerances only; material and property class are assigned by ISO 898-1/898-2, and surface finish by separate finish standards.
DIN 7985 — Scope
DIN 7985 specifies the dimensions and tolerances of pan head screws. Material, property class, surface finish and packaging are governed by separate documents in the same standards family (for example ISO 898-1 for the mechanical property classes of bolts and screws).
Tolerance & Product Grades
DIN 7985, alongside the related ISO 1207 / ISO 7045 / DIN 7985 entries on this site, specifies product grades (typically A or B for fine work and C for general engineering) and tolerance classes for the controlling dimensions. Choose the grade against the precision your application requires.
Dimensions Specified by DIN 7985
| Size | Pitch (mm) | Head diameter dk (mm) | Head height k (mm) | Cross recess | Reference standard |
|---|---|---|---|---|---|
| M1 | 0.25 | 2.0 | 0.8 | PH0 | ISO 1207 / ISO 7045 / DIN 7985 |
| M1.2 | 0.25 | 2.3 | 0.9 | PH0 | ISO 1207 / ISO 7045 / DIN 7985 |
| M1.4 | 0.3 | 2.6 | 1.0 | PH0 | ISO 1207 / ISO 7045 / DIN 7985 |
| M1.6 | 0.35 | 3.0 | 1.0 | PH0 | ISO 1207 / ISO 7045 / DIN 7985 |
| M2 | 0.4 | 3.8 | 1.3 | PH1 | ISO 1207 / ISO 7045 / DIN 7985 |
| M2.5 | 0.45 | 4.7 | 1.5 | PH1 | ISO 1207 / ISO 7045 / DIN 7985 |
| M3 | 0.5 | 5.6 | 1.8 | PH1 | ISO 1207 / ISO 7045 / DIN 7985 |
| M3.5 | 0.6 | 6.5 | 2.1 | PH2 | ISO 1207 / ISO 7045 / DIN 7985 |
| M4 | 0.7 | 8.0 | 2.4 | PH2 | ISO 1207 / ISO 7045 / DIN 7985 |
| M5 | 0.8 | 9.5 | 3.0 | PH2 | ISO 1207 / ISO 7045 / DIN 7985 |
| M6 | 1.0 | 12.0 | 3.6 | PH3 | ISO 1207 / ISO 7045 / DIN 7985 |
| M8 | 1.25 | 16.0 | 4.8 | PH3 | ISO 1207 / ISO 7045 / DIN 7985 |
| M10 | 1.5 | 20.0 | 6.0 | PH4 | ISO 1207 / ISO 7045 / DIN 7985 |
Companion Standards
DIN 7985 controls only the geometry of pan head screws. The mechanical strength is set by ISO 898-1 (bolts and screws) or ISO 898-2 (nuts); the surface finish is governed by separate finish standards (e.g. ISO 4042 for electroplating). For corrosion testing, the relevant document is ISO 9227 (neutral salt spray).
When to Specify DIN 7985
DIN 7985 is still widely used in European mechanical engineering and as a cross-reference on legacy drawings; its ISO equivalent is preferred for new designs.