--- title: "ISO 4014 Hex Bolt Specification" description: "ISO 4014 Hex Bolt: full dimensional table with tolerances. DIN, ISO and ASME equivalents listed side by side. Head, thread and length ranges in one chart." url: https://engineeringhardware.com/guide/standard/iso-4014-hex-bolts/ source: Engineering Hardware & Fasteners --- # ISO 4014 Hex Bolt Specification Bolts · GB/T 5782 / ISO 4014 Dimensional table, tolerance classes and the DIN / ISO / ASME parts that supersede or match this standard. ISO 4014 specifies the dimensions and tolerances for hex bolt. The full dimensional table is reproduced below, followed by the DIN, ISO and ASME parts that match or supersede it. - **Standard:** ISO 4014 - **Product:** Hex Bolt — GB/T 5782 / ISO 4014 (Series 006) - **Governing standards:** GB/T 5782 / ISO 4014 Equivalence between national standards is dimensional, not always metallurgical. Check the property class separately when substituting. ![ISO 4014 Hex Bolt Specification reference image](https://engineeringhardware.com/wp-content/uploads/2026/06/Hex-Bolts-—-ISO-4014-／-ISO-4017-Detail.webp) ISO 4014 is the governing dimensional standard for hex bolt. This page sets out the scope of the standard, reproduces the full size table it specifies, and lists the DIN/ISO/ASME cross-references commonly cited in datasheets and drawings. ## ISO 4014 — Scope ISO 4014 is "Fasteners — Hexagon head bolts — Product grades A and B". It covers M1.6 to M64. Partly threaded. The fully threaded equivalent is ISO 4017. Material, property class, surface finish and packaging are governed by separate documents — ISO 898-1 and ISO 898-2 for mechanical property classes, ISO 4042 for electroplated finishes. ## Tolerance & Product Grades ISO 4014 defines product grades A and B. The grade sets how closely the finished part has to follow the nominal dimensions; it is not a strength rating. ## Dimensions Specified by ISO 4014 | Size | Pitch (mm) | Nominal diameter d (mm) | Length L (mm) | Width across flats s (mm) | Width across corners e (mm) | Head height k (mm) | | --- | --- | --- | --- | --- | --- | --- | | M3 | 0.5 | 3 | 20 | 5.5 | 6.01 | 2.0 | | M4 | 0.7 | 4 | 25 | 7.0 | 7.66 | 2.8 | | M5 | 0.8 | 5 | 30 | 8.0 | 8.79 | 3.5 | | M6 | 1.0 | 6 | 40 | 10.0 | 11.05 | 4.0 | | M8 | 1.25 | 8 | 50 | 13.0 | 14.38 | 5.3 | | M10 | 1.5 | 10 | 60 | 16.0 | 17.77 | 6.4 | | M12 | 1.75 | 12 | 80 | 18.0 | 20.03 | 7.5 | | M14 | 2.0 | 14 | 80 | 21.0 | 23.36 | 8.8 | | M16 | 2.0 | 16 | 100 | 24.0 | 26.75 | 10.0 | | M18 | 2.5 | 18 | 100 | 27.0 | 30.14 | 11.5 | | M20 | 2.5 | 20 | 120 | 30.0 | 33.53 | 12.5 | | M24 | 3.0 | 24 | 150 | 36.0 | 39.98 | 15.0 | | M30 | 3.5 | 30 | 180 | 46.0 | 50.85 | 18.7 | | M36 | 4.0 | 36 | 200 | 55.0 | 60.79 | 22.5 | ## Companion Standards ISO 4014 controls only the geometry of hex bolt — gb/t 5782 / iso 4014 (series 006). The mechanical strength is set by ISO 898-1 (bolts, screws and studs) or ISO 898-2 (nuts); the surface finish is governed by separate finish standards such as ISO 4042 for electroplating. For corrosion testing, the relevant document is ISO 9227 (neutral salt spray). ## When to Specify ISO 4014 Choose ISO 4014 for international engineering work and OEM supply where ISO standards are the contractual reference. It is the default modern specification for hex bolt — gb/t 5782 / iso 4014 (series 006). Custom manufacturing · Made to drawing ## Need a bolt to this standard in a non-standard size? Parts built to ISO 4014 are already in the catalog, so a special is usually a variation on existing tooling rather than a new design — which is what keeps the cost down. Made by cold heading or hot forging. Minimum order from 2,000 pieces; samples within 7 days of drawing approval. [Custom bolt manufacturing](https://engineeringhardware.com/custom/bolts/)[Send a drawing](https://engineeringhardware.com/custom/bolts/#rfq) ## Technical Drawing Dimensioned line drawing of M3 Hex Bolt — GB/T 5782 / ISO 4014 (Series 006) to GB/T 5782 / ISO 4014. Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected. - **Pitch (mm):** 0.5 - **Nominal diameter d (mm):** 3 - **Length L (mm):** 20 - **Width across flats s (mm):** 5.5 - **Width across corners e (mm):** 6.01 - **Head height k (mm):** 2.0 ## Dimensions & Specifications (GB/T 5782 / ISO 4014) | Size | Pitch (mm) | Nominal diameter d (mm) | Length L (mm) | Width across flats s (mm) | Width across corners e (mm) | Head height k (mm) | | --- | --- | --- | --- | --- | --- | --- | | M3 | 0.5 | 3 | 20 | 5.5 | 6.01 | 2.0 | | M4 | 0.7 | 4 | 25 | 7.0 | 7.66 | 2.8 | | M5 | 0.8 | 5 | 30 | 8.0 | 8.79 | 3.5 | | M6 | 1.0 | 6 | 40 | 10.0 | 11.05 | 4.0 | | M8 | 1.25 | 8 | 50 | 13.0 | 14.38 | 5.3 | | M10 | 1.5 | 10 | 60 | 16.0 | 17.77 | 6.4 | | M12 | 1.75 | 12 | 80 | 18.0 | 20.03 | 7.5 | | M14 | 2.0 | 14 | 80 | 21.0 | 23.36 | 8.8 | | M16 | 2.0 | 16 | 100 | 24.0 | 26.75 | 10.0 | | M18 | 2.5 | 18 | 100 | 27.0 | 30.14 | 11.5 | | M20 | 2.5 | 20 | 120 | 30.0 | 33.53 | 12.5 | | M24 | 3.0 | 24 | 150 | 36.0 | 39.98 | 15.0 | | M30 | 3.5 | 30 | 180 | 46.0 | 50.85 | 18.7 | | M36 | 4.0 | 36 | 200 | 55.0 | 60.79 | 22.5 | ## Materials & Grades Select a material class to see the grades we supply it in. Each designation is listed with its ISO/EN, AISI/SAE, JIS and GB equivalents. Stainless Steel38 Carbon Steel66 Alloy Steel41 Bearing Steel5 Spring Steel25 Aluminum and Aluminum Alloys21 Brass17 Bronze11 Copper8 Titanium and Titanium Alloys18 Nickel and Nickel Alloys22 Iron-Nickel and High-Temperature Alloys10 Tool Steel and Specialty Hardened Steel9 Structural and Construction Steel9 ### Stainless Steel #### Austenitic Stainless Steel - A1 AISI 303 · SAE 303 · SUS303 · EN 1.4305 · X8CrNiS18-9 - A2 AISI 304 · SAE 304 · SUS304 · EN 1.4301 · X5CrNi18-10 · 06Cr19Ni10 - 304L AISI 304L · SUS304L · EN 1.4307 · X2CrNi18-9 · 022Cr19Ni10 - 302 AISI 302 · SUS302 · EN 1.4310 - 305 AISI 305 · SUS305 · EN 1.4303 - A4 AISI 316 · SAE 316 · SUS316 · EN 1.4401 · X5CrNiMo17-12-2 · 06Cr17Ni12Mo2 - 316L AISI 316L · SUS316L · EN 1.4404 · X2CrNiMo17-12-2 · 022Cr17Ni12Mo2 - 321 AISI 321 · SUS321 · EN 1.4541 · X6CrNiTi18-10 - 310 / 310S AISI 310 · AISI 310S · SUS310S · EN 1.4845 - 302HQ AISI 302HQ - A3 - A5 - 347 AISI 347 · SUS347 · EN 1.4550 · X6CrNiNb18-10 - 309 / 309S AISI 309 · AISI 309S · SUS309S #### Martensitic Stainless Steel - AISI 410 SUS410 · EN 1.4006 · X12Cr13 · 12Cr13 - AISI 420 SUS420J1 · SUS420J2 · EN 1.4021 · EN 1.4028 · 20Cr13 · 30Cr13 - AISI 431 SUS431 · EN 1.4057 · X17CrNi16-2 - C1 - C3 - C4 - AISI 440A - AISI 440B - AISI 440C SUS440C · EN 1.4125 #### Ferritic Stainless Steel - AISI 430 SUS430 · EN 1.4016 · X6Cr17 · 10Cr17 - F1 - AISI 434 - AISI 444 #### Precipitation-Hardening Stainless Steel - 17-4 PH AISI 630 · UNS S17400 · SUS630 · EN 1.4542 · X5CrNiCuNb16-4 - 15-5 PH UNS S15500 - 17-7 PH UNS S17700 #### Duplex and Super Duplex Stainless Steel - Duplex 2205 UNS S31803 · UNS S32205 · EN 1.4462 - Super Duplex 2507 UNS S32750 · EN 1.4410 - D2 - D4 - D6 - D8 - Lean Duplex 2101 UNS S32101 - Super Duplex S32760 UNS S32760 · EN 1.4501 ### Carbon Steel #### Low-Carbon Steel - SAE 1006 - SAE 1008 - SAE 1010 - SAE 1018 - SAE 1020 - Q195 - Q235 - SAE 1012 - SAE 1015 - Q215 - ML08 - ML08Al - ML10 - ML15 - ML20 - SWRCH6A - SWRCH8A - SWRCH10A - SWRCH12A - SWRCH15A - SWRCH18A #### Medium-Carbon Steel - SAE 1035 - SAE 1045 - S45C - C45 - SAE 1030 - SAE 1040 - SAE 1050 - 30 - 35 - 40 - 45 - 50 - S35C - S40C - S50C - C35 - C40 #### High-Carbon Steel - SAE 1060 - SAE 1070 - 65Mn - SAE 1065 - SAE 1075 - SAE 1080 - SAE 1085 - SAE 1090 - SAE 1095 - 60 - 65 - 70 - 75 - 80 - 85 #### Cold-Heading Steel - SWRCH22A - 10B21 - SWRCH22K - SWRCH25K - SWRCH30K - SWRCH35K - SWRCH40K - ML20Mn - ML25 - ML30 - ML35 - ML40 - 15B25 ### Alloy Steel #### Chromium Steel - 40Cr - 45Cr - AISI 5140 - SAE 5140 - AISI 5120 - SAE 5120 - SCr420 - SCr440 #### Chromium-Molybdenum Steel - 35CrMo - 42CrMo - AISI 4140 - SCM435 - SCM440 - 42CrMo4 - 30CrMo - AISI 4130 - SAE 4130 - SAE 4140 - AISI 4142 - AISI 4145 - SCM415 - SCM420 - SCM445 - EN 1.7220 - EN 1.7225 - 25CrMo4 - 34CrMo4 #### Nickel-Chromium-Molybdenum Steel - AISI 4340 - SAE 4340 - 40CrNiMo - SNCM439 - EN 1.6511 - 36CrNiMo4 #### Boron Alloy Steel - 10B22 - 10B21 - 15B21 - 15B25 - 20MnTiB - 20Mn2B - 35VB - 40MnB ### Bearing Steel #### Bearing Steel - GCr15 - AISI 52100 SAE 52100 · UNS G52986 - SUJ2 - 100Cr6 EN 1.3505 - GCr15SiMn ### Spring Steel #### Carbon Spring Steel - SAE 1065 - SAE 1070 - SAE 1075 - SAE 1080 - SAE 1095 - 65 - 70 - 75 - 80 - 65Mn #### Silicon-Manganese Spring Steel - 60Si2Mn - 60Si2MnA - SUP6 - SUP7 #### Chromium-Vanadium Spring Steel - 50CrVA - SAE 6150 - AISI 6150 - SUP10 #### Stainless Spring Steel - AISI 301 - SUS301 - EN 1.4310 - AISI 302 - AISI 304 - AISI 316 - 17-7 PH ### Aluminum and Aluminum Alloys #### Commercially Pure Aluminum - 1050 - 1060 - 1070 - 1100 #### 2xxx Series Aluminum - 2024 - 2011 - 2014 - 2017 #### 5xxx Series Aluminum - 5052 - 5083 - 5754 #### 6xxx Series Aluminum - 6061 - 6061-T6 - 6063 - 6082 - 6082-T6 #### 7xxx Series Aluminum - 7075 - 7075-T6 - 7005 - 7050 - 7075-T73 ### Brass #### Free-Cutting Brass - C36000 - H62 - HPb59-1 - C3601 - C3602 - C3604 - CuZn36Pb3 - CuZn39Pb3 - EN CW614N - EN CW617N - H65 #### Lead-Free Brass - C69300 - C27450 - CW510L - CW511L #### Naval Brass - C46400 - CuZn39Sn1 ### Bronze #### Silicon Bronze - C65500 - C65100 - C65600 #### Phosphor Bronze - C51000 - C52100 - CuSn6 - CuSn8 #### Aluminum Bronze - C95400 - C95500 - C63000 - CuAl10Ni5Fe4 ### Copper #### Copper - C11000 - T2 - C10100 - C10200 - C12200 - T1 - TU1 - TU2 ### Titanium and Titanium Alloys #### Commercially Pure Titanium - Grade 2 - Grade 1 - Grade 3 - Grade 4 - TA1 - TA2 - TA3 #### Alpha-Beta Titanium Alloys - Grade 5 - Ti-6Al-4V - TC4 - UNS R56400 #### Low-Interstitial Grade - Grade 23 - Ti-6Al-4V ELI - UNS R56407 #### Other Titanium Fastener Alloys - Ti-6Al-6V-2Sn - Ti-6Al-2Sn-4Zr-2Mo - Beta-C titanium - Ti-10V-2Fe-3Al ### Nickel and Nickel Alloys #### Commercially Pure Nickel - Nickel 200 - UNS N02200 - Nickel 201 - UNS N02201 #### Inconel Alloys - Inconel 625 UNS N06625 - Inconel 718 UNS N07718 - Inconel 600 UNS N06600 - Inconel 601 UNS N06601 - Inconel 686 UNS N06686 - Inconel X-750 UNS N07750 #### Monel Alloys - Monel 400 UNS N04400 - Monel K-500 UNS N05500 #### Hastelloy Alloys - Hastelloy C-276 UNS N10276 - Hastelloy C-22 UNS N06022 - Hastelloy B-2 UNS N10665 - Hastelloy B-3 UNS N10675 - Hastelloy X UNS N06002 #### Other Nickel Alloys - Alloy 20 UNS N08020 - Alloy 625 - Alloy 718 - Alloy 825 UNS N08825 - Alloy 925 UNS N09925 ### Iron-Nickel and High-Temperature Alloys #### A286 - A-286 - UNS S66286 - EN 1.4980 #### Invar - Invar 36 - Alloy 36 - UNS K93600 - FeNi36 #### Alloy 42 - Alloy 42 - UNS K94100 - FeNi42 ### Tool Steel and Specialty Hardened Steel #### Tool Steel and Specialty Hardened Steel - AISI D2 - AISI H13 - SKD11 - Cr12MoV - AISI O1 - AISI A2 - AISI S7 - SKD61 - 9CrSi ### Structural and Construction Steel #### Structural and Construction Steel - ASTM A36 - Q235B - Q355B - S355JR - Q235C - Q355C - S235JR - S275JR - S355J2 ## Applications & Industries The sectors that buy Hex Bolt to GB/T 5782 / ISO 4014, and the duty each one buys them for. Stocked from M3 to M36. ### Industries that specify Hex Bolt - **Food, pharma & cleanroom:** Stainless assemblies that are washed down, where the finish matters as much as the strength. - **Machine building & OEM:** The default fastener on production equipment: covers, brackets, motor mounts and sub-assemblies tightened to a specified torque. - **Automotive & transport:** Chassis, driveline and body fixings that see vibration and are assembled to a controlled preload. - **Steel fabrication:** Bolted connections in frames, enclosures, walkways and weldments, on the bench and on site. - **Energy & infrastructure:** Tower, pipework, switchgear and plant fixings specified for long service life and inspectable joints. - **Maintenance & MRO:** Stocked replacements matched to an existing property class, thread and finish. ### Typical applications - bolting brackets, motors and gearboxes to a frame - assemblies that are dismantled for service and re-torqued - joints where the property class is stated on the drawing - clamping two machined faces to a calculated preload ### Service conditions to specify against - **Marine and coastal:** Available in A4 (316) stainless for chloride exposure — coastal structures, pool halls, water treatment and deck hardware, where A2 will eventually pit. - **High load:** Supplied in ISO 898-1 property classes, so the joint can be designed to a stated proof load and tightened to a calculated torque rather than by feel. - **Torque and preload:** The joint is designed around bolt tension, so lubrication, coating and the friction coefficient all change the torque figure — state them together. ### Where to use something else - Do not use a machine thread into unthreaded sheet or timber; use a tapping screw, rivet nut or insert made for that parent material. [Full application guide: where Hex Bolt are used, how to specify them, and the cases they are wrong for](https://engineeringhardware.com/applications/cad-svg-006-hexbolt/) Inside the plant ## Manufactured in our own plant This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided. 1. ![Wire rod feeding into a cold heading machine](https://engineeringhardware.com/wp-content/uploads/2026/08/09-wire-rod-feed-cold-heading-machine.webp) 01 **Cold heading** Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail. Head dimensions and under-head radius checked at set-up and per shift. 2. ![Thread rolling machine producing bolt threads](https://engineeringhardware.com/wp-content/uploads/2026/08/03-thread-rolling-machine-bolt-production.webp) 02 **Thread rolling** Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch. Go / no-go ring gauges to ISO 965 tolerance class 6g. 3. ![Baskets of bolts staged for heat treatment](https://engineeringhardware.com/wp-content/uploads/2026/08/05-heat-treatment-baskets-black-bolts.webp) 03 **Heat treatment** Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it. Core hardness and tensile tested per lot to ISO 898-1. 4. ![Zinc plated bolts in a treatment basket](https://engineeringhardware.com/wp-content/uploads/2026/08/23-zinc-plated-bolts-treatment-basket.webp) 04 **Surface treatment** Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list. Coating thickness and neutral salt spray hours to ISO 9227. ## Frequently Asked Questions ### Which edition of ISO 4014 does this table follow? The table reproduces the dimensions we supply hex bolt — gb/t 5782 / iso 4014 (series 006) to. We do not publish an edition year against it, so where the edition is contractually significant, cite the edition you require on the enquiry and we will confirm it against the table before quoting. ### What is ISO 4014? ISO 4014 is "Fasteners — Hexagon head bolts — Product grades A and B". It covers M1.6 to M64. Partly threaded. The fully threaded equivalent is ISO 4017. ### What does ISO 4014 specify for Hex Bolt — GB/T 5782 / ISO 4014 (Series 006)? ISO 4014 specifies the dimensions and tolerances of hex bolt — gb/t 5782 / iso 4014 (series 006). Material and property class are governed by separate documents. ### What is the equivalent of ISO 4014 in DIN or ASME? ISO 4014 (partial thread) corresponds closely to DIN 931; the fully-threaded variant ISO 4017 corresponds to DIN 933. ### How do I request a quotation? Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day. ## Related Pages [View the full Hex Bolt — GB/T 5782 / ISO 4014 (Series 006) page](https://engineeringhardware.com/fastener/cad-svg-006-hexbolt/) ### More Hex Bolt — GB/T 5782 / ISO 4014 (Series 006) Guides