Skip to content
info@engineeringhardware.com
WhatsApp
Request a Quote
Screws · ASME B18.6.3 · Application guide

What Are Slotted Pan Head Machine Screws, UNC Used For?

Typical applications, the industries that specify slotted pan head machine screws, unc, and how to choose the right size, material and finish for the joint.

Slotted Pan Head Machine Screws, UNC are used for inch slotted pan head machine screws with UNC thread. They are manufactured to ASME B18.6.3, and the choice of size, property class and finish is driven by the load in the joint and the environment it sits in.

Primary duty
Inch slotted pan head machine screws with UNC thread
Governing standard
ASME B18.6.3
Screw size range
1/2" to #12
Category
Screws

Application notes are general engineering guidance. Verify the property class and any approval requirement against your own design calculation.

What Are Slotted Pan Head Machine Screws, UNC Used For? application image

The primary duty of Slotted Pan Head Machine Screws, UNC is inch slotted pan head machine screws with UNC thread. Below: the sectors that specify them in volume, the checklist used to select the right size and material for the application, installation notes, and the known limits of the type. Stocked across roughly 1 to 12, they cover general to heavy-duty work.

Typical Applications for Slotted Pan Head Machine Screws, UNC

The most common settings where these are specified:

  • Electronics: chassis.
  • Appliances: inch hardware.
  • Electrical: terminals.
  • Maintenance: repair.

How to Specify Slotted Pan Head Machine Screws, UNC for Your Application

  • Size: Match the nominal size to the mating thread or hole. This product spans 1–12; check the full table below for the exact dimensions of each size.
  • Drive & head: Pick the drive (socket, cross, slot) and head style for the tool access and seating surface; a recessed drive resists cam-out under power tools.
  • Environment: For damp, coastal or chemical exposure prefer A4/316 stainless or a suitable coating; indoors, plated steel or A2 is usually sufficient.
  • Standard: This product is supplied to ASME B18.6.3. Quoting the standard on your order guarantees interchangeable dimensions between suppliers.

Installation & Assembly Practice

  • Match the driver exactly to the recess (PH ≠ PZ; hex key sizes per ISO 2936) and keep the tool axial — side load is the main cause of stripped drives.
  • In tapped holes, engage a thread length of at least 1× the nominal diameter in steel, 2× in aluminum.
  • Set power tools to a torque that seats the head without embedding it into the mating surface.

Common Selection Mistakes with Slotted Pan Head Machine Screws, UNC

  • Under-sizing the drive for the installation torque — a small recess at high torque strips before the screw is seated.
  • Using a countersunk head in thin sheet where the countersink removes most of the load-bearing material.
  • Specifying stainless in high-strength duty: A2-70 is roughly class 7 steel, not a 10.9 substitute.

Where Slotted Pan Head Machine Screws, UNC Are Not the Right Choice

Not for high-preload structural joints (use a property-class bolt and nut), and not in thin sheet where a self-drilling or self-tapping type suits better.

Custom manufacturing · Made to drawing

Need a slotted pan head machine screws, UNC outside the standard range?

Material and finish are usually what drives a special — a grade the standard part is not stocked in, or a coating chosen against a salt-spray figure instead of a default. Made by cold heading or warm forging.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

Custom screw manufacturingSend a drawing

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Dimensioned line drawing of #0 Slotted Pan Head Machine Screws, UNC to ASME B18.6.3. Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.
Pitch P (in)
0.013
Head diameter dk (in)
0.116
Head height k (in)
0.039
R (in)
0.02
J (in)
0.023
T (in)
0.022
Length range l (in)
1/16"~1 1/2"
Sends the selected values to the quote form below.

Request a Quote

The form below follows the current technical drawing configuration. Change the drawing values above and the request details update automatically.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (ASME B18.6.3)

SizePitch P (in)Head diameter dk (in)Head height k (in)R (in)J (in)T (in)Length range l (in)Reference standard
#00.0130.1160.0390.020.0230.0221/16"~1 1/2"ASME B18.6.3
#10.0160.1420.0460.0250.0260.0271/16"~1 1/2"ASME B18.6.3
#20.0180.1670.0530.0350.0310.0311/16"~2 1/2"ASME B18.6.3
#30.0210.1930.060.0370.0350.0361/8"~2 1/2"ASME B18.6.3
#40.0250.2190.0680.0420.0390.041/8"~4"ASME B18.6.3
#50.0250.2450.0750.0440.0430.0453/16"~4"ASME B18.6.3
#60.0310.270.0820.0460.0480.051/8"~4"ASME B18.6.3
#80.0310.3220.0960.0520.0540.0581/8"~5"ASME B18.6.3
#100.0420.3730.110.0610.060.0683/16"~8"ASME B18.6.3
#120.0420.4250.1250.0780.0670.0771/4"~8"ASME B18.6.3
1/4"0.050.4920.1440.0870.0750.0873/8"~10"ASME B18.6.3
5/16"0.0560.6150.1780.0990.0840.1061/2"~10"ASME B18.6.3
3/8"0.0620.740.2120.1430.0940.1241/2"~12"ASME B18.6.3
7/16"0.0710.8630.2470.1530.0940.1423/4"~12"ASME B18.6.3
1/2"0.0770.9870.2810.1750.1060.1613/4"~12"ASME B18.6.3
9/16"0.0831.0410.3150.1970.1180.1793/4"~12"ASME B18.6.3
5/8"0.0911.1720.350.2190.1330.1973/4"~14"ASME B18.6.3
3/4"0.11.4350.4190.2630.1490.2341"~14"ASME B18.6.3
Inside the plant

Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

  1. Wire rod feeding into a cold heading machine
    01

    Cold heading

    Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail.

    Head dimensions and under-head radius checked at set-up and per shift.

  2. Thread rolling machine producing bolt threads
    02

    Thread rolling

    Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch.

    Go / no-go ring gauges to ISO 965 tolerance class 6g.

  3. Baskets of bolts staged for heat treatment
    03

    Heat treatment

    Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it.

    Core hardness and tensile tested per lot to ISO 898-1.

  4. Zinc plated bolts in a treatment basket
    04

    Surface treatment

    Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list.

    Coating thickness and neutral salt spray hours to ISO 9227.

Frequently Asked Questions

What material should Slotted Pan Head Machine Screws, UNC be for outdoor use?

For damp, coastal or chemical environments specify A4 (316) stainless or a suitably coated steel. For indoor or dry use, A2 (304) stainless or zinc-plated steel is normally adequate.

Are Slotted Pan Head Machine Screws, UNC made to a recognized standard?

Yes — they are manufactured to ASME B18.6.3, so dimensions are interchangeable between suppliers when you quote the standard on your order.

What are Slotted Pan Head Machine Screws, UNC used for?

Inch slotted pan head machine screws with UNC thread. They are supplied to ASME B18.6.3.

Which industries use Slotted Pan Head Machine Screws, UNC?

They are commonly specified in electrical, maintenance and electronics, among other sectors.

Can I get a quote for Slotted Pan Head Machine Screws, UNC in the size and material I need?

Yes. Use the technical drawing and quote form on this page to set the size and options, then send the exact configuration to our team for pricing and lead time.