Hex Nut — GB/T 41 / ISO 4034 (Series 060) are used primarily for the clamped counter-face of a bolted joint. This page summarizes where they fit, the industries that rely on them, and the practical points to get right when you specify them — to GB/T 41 / ISO 4034. Stocked across roughly M3 to M36, they cover general to heavy-duty work.
Typical Applications for Hex Nut — GB/T 41 / ISO 4034 (Series 060)
The most common settings where these are specified:
- Bolted joints: the clamping counter-face on studs and bolts across every assembly type.
- Vibration-prone equipment: where a locking or flanged style resists loosening.
- Frames & weldments: captive or welded options for repeatable assembly.
- General machine building: fastening covers, brackets, motors and sub-assemblies on production equipment.
- Maintenance & repair (MRO): a stocked size for servicing existing plant where the original fastener spec must be matched.
How to Specify Hex Nut — GB/T 41 / ISO 4034 (Series 060) for Your Application
- Size: Match the nominal size to the mating thread or hole. This product spans M3–M36; check the full table below for the exact dimensions of each size.
- Locking & grade: Match the strength grade to the bolt, and choose a locking style (nyloc, all-metal, serrated flange) if the joint sees vibration.
- Environment: For damp, coastal or chemical exposure prefer A4/316 stainless or a suitable coating; indoors, plated steel or A2 is usually sufficient.
- Standard: This product is supplied to GB/T 41 / ISO 4034. Quoting the standard on your order guarantees interchangeable dimensions between suppliers.
Where Hex Nut — GB/T 41 / ISO 4034 (Series 060) Are Not the Right Choice
Not on their own — they need a matching bolt or stud — and a plain nut is not a substitute for a locking type under heavy vibration.