The primary duty of Clinch Lantern Rivet Nuts is putting a thread into sheet, tube or a closed section that can only be reached from one side. Below: the sectors that specify them in volume, the checklist used to select the right size and material for the application, installation notes, and the known limits of the type. Stocked across roughly M4 to M8, they cover general to heavy-duty work.
Typical Applications for Clinch Lantern Rivet Nuts
The most common settings where these are specified:
- Bolted joints: the clamping counter-face on studs and bolts across every assembly type.
- Vibration-prone equipment: where a locking or flanged style resists loosening.
- Frames & weldments: captive or welded options for repeatable assembly.
- General machine building: fastening covers, brackets, motors and sub-assemblies on production equipment.
- Maintenance & repair (MRO): a stocked size for servicing existing plant where the original fastener spec must be matched.
Related Rivet Nuts (Blind Threaded Inserts) products
Flat Head Smooth Type Thread Embedded Fastener Zinc-Nickel Alloy Rivet Nuts
Round Head · GB
US$0.012 – 0.13MOQ 10,000 pieces
Custom Stainless Steel Binding Barrel Screws for M2 M3 M4 M5 M6
Rivet Nut · DIN, ANSI, GB, JIS, BSW
US$0.0012 – 0.0024MOQ 1,000 pieces
Zinc Plated Hex Rivet Nut Flat Head for Metal Panels
Round Head · DIN
US$0.012 – 0.036MOQ 10,000 boxes
Stainless Steel A2 M3 M4 M5 M6 M8 M10 M12 Flat Head Inner-Hex Rivet Nut Big Head Semi-Hex Rivnut
Reduce Head · DIN, GB
US$0.012 – 0.036MOQ 50,000 pieces
Head Blind Rivet Nut Small Countersunk Full Hexagon Rivet Nuts
Countersunk Head · GB
US$0.0144 – 0.14MOQ 10,000 pieces
Stainless Steel M5m6m8 Hexagon Rivet Nut Blind Rivet Nut-1033026
Auto Fasteners, Hexagon Head · DIN, ANSI, GB, JIS, Bsw
US$0.024 – 0.036MOQ 50,000 pieces
View all Rivet Nuts & Threaded Rivet Inserts → Full product catalog
How to Specify Clinch Lantern Rivet Nuts for Your Application
- Size: Match the nominal size to the mating thread or hole. This product spans M4–M8; check the full table below for the exact dimensions of each size.
- Locking & grade: Match the strength grade to the bolt, and choose a locking style (nyloc, all-metal, serrated flange) if the joint sees vibration.
- Environment: For damp, coastal or chemical exposure prefer A4/316 stainless or a suitable coating; indoors, plated steel or A2 is usually sufficient.
- Standard: This product is supplied to Trade series (lantern-type clinch rivet nuts). Quoting the standard on your order guarantees interchangeable dimensions between suppliers.
Installation & Assembly Practice
- Run the nut down by hand before applying the wrench to catch cross-threading early.
- Tighten the nut rather than the bolt head where access allows — the torque-to-preload relation is more consistent.
- For locking styles, note that nyloc inserts are single-use in critical joints and lose grip above roughly 120 °C.
Common Selection Mistakes with Clinch Lantern Rivet Nuts
- Pairing a high-class bolt with a lower-class nut — the nut strips before the bolt reaches proof load; the nut class must meet or exceed the bolt class.
- Using a plain nut with a spring washer in severe vibration instead of a prevailing-torque locking nut.
- Re-using nyloc nuts in critical joints.
Where Clinch Lantern Rivet Nuts Are Not the Right Choice
Not on their own — they need a matching bolt or stud — and a plain nut is not a substitute for a locking type under heavy vibration.
Custom manufacturing · Made to drawing
Need a clinch lantern rivet nuts outside the standard range?
Locking method is specifiable independently of the rest: nylon insert, all-metal deformed thread, serrated flange, or none. Made by cold heading or tapping.
Minimum order from 2,000 pieces; samples within 7 days of drawing approval.
