Skip to content
info@engineeringhardware.com
WhatsApp
Request a Quote
Rivets · Trade series (fabric snap fasteners) · Application guide

What Are Fabric Snap Fasteners Used For?

Typical applications, the industries that specify fabric snap fasteners, and how to choose the right size, material and finish for the joint.

Fabric Snap Fasteners are used for joining fabric to a mating stud so a cover can be installed and removed without a loose nut. They are manufactured to Trade series (fabric snap fasteners), and selection is driven by the screw size, the fit and tolerance the assembly requires, and the service environment.

Primary duty
Joining fabric to a mating stud so a cover can be installed and removed without a loose nut
Governing standard
Trade series (fabric snap fasteners)
Screw size range
1/2 to 9/16
Category
Rivets

Application notes are general engineering guidance. Verify the property class and any approval requirement against your own design calculation.

What Are Fabric Snap Fasteners Used For? application image

Application guide for Fabric Snap Fasteners to Trade series (fabric snap fasteners). The core duty of the type is joining fabric to a mating stud so a cover can be installed and removed without a loose nut. The typical industries, the how-to-specify checklist, assembly practice and the exclusion cases are set out below. Stocked across roughly 1 to 9, they cover general to heavy-duty work.

Typical Applications for Fabric Snap Fasteners

The most common settings where these are specified:

  • Marine canvas: Snap sets attach fabric panels to solid surfaces with removable hardware.
  • Vehicle interiors: Threaded or blind-rivet studs secure trim and covers.
  • Outdoor covers: Stainless and plated options follow moisture exposure.
  • Upholstery: Snap diameter and stud form match the material stack.

How to Specify Fabric Snap Fasteners for Your Application

  • Size: Select on screw size, and confirm it against the mating feature in the assembly. This product spans 1–9; check the full table below for the exact dimensions of each size.
  • Material: Choose the material and finish for the service environment — plated steel for general use, stainless for corrosion resistance.
  • Environment: For damp, coastal or chemical exposure prefer A4/316 stainless or a suitable coating; indoors, plated steel or A2 is usually sufficient.
  • Standard: This product is supplied to Trade series (fabric snap fasteners). Quoting the standard on your order guarantees interchangeable dimensions between suppliers.

Installation & Assembly Practice

  • Drill the hole 0.1 mm over the nominal rivet diameter and deburr both sides before setting.
  • Grip range must match the total joint thickness — a rivet set outside its grip range clamps poorly and works loose.

Common Selection Mistakes with Fabric Snap Fasteners

  • Setting a rivet outside its grip range, which leaves the joint loose from day one.
  • Using aluminum rivets on steel sheet outdoors — galvanic corrosion eats the rivet.

Where Fabric Snap Fasteners Are Not the Right Choice

Not where the joint must later be disassembled, and not for high-tension structural connections.

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

The form below follows the current technical drawing configuration. Change the drawing values above and the request details update automatically.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (Trade series (fabric snap fasteners))

Snap diameter (in)Stud formStud thread / screwStud length (in)Material optionsFabric / panel selection
1/2threaded stud8-323/16 or 1/218-8 stainless / black- or nickel-plated brass or steelmatch the mating fabric hardware
9/16tapping-screw studNo. 73/818-8 stainless / black- or nickel-plated brass or steelmatch the mating fabric hardware
9/16blind-rivet stud18-8 stainless / black- or nickel-plated brass or steel0.125~0.188 or 0.188~0.375 in; 0.125 in hole
Inside the plant

Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

  1. Wire rod feeding into a cold heading machine
    01

    Cold heading

    Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail.

    Head dimensions and under-head radius checked at set-up and per shift.

  2. Thread rolling machine producing bolt threads
    02

    Thread rolling

    Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch.

    Go / no-go ring gauges to ISO 965 tolerance class 6g.

  3. Baskets of bolts staged for heat treatment
    03

    Heat treatment

    Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it.

    Core hardness and tensile tested per lot to ISO 898-1.

  4. Zinc plated bolts in a treatment basket
    04

    Surface treatment

    Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list.

    Coating thickness and neutral salt spray hours to ISO 9227.

Frequently Asked Questions

Are Fabric Snap Fasteners made to a recognized standard?

Yes — they are manufactured to Trade series (fabric snap fasteners), so dimensions are interchangeable between suppliers when you quote the standard on your order.

What are Fabric Snap Fasteners used for?

Joining fabric to a mating stud so a cover can be installed and removed without a loose nut. They are supplied to Trade series (fabric snap fasteners).

Which industries use Fabric Snap Fasteners?

They are commonly specified in upholstery, marine canvas and vehicle interiors, among other sectors.

How do I choose the right size of Fabric Snap Fasteners?

Select on screw size and on the fit the assembly requires. This product is available from 1 to 9; the full dimension table on this page lists each size.

Can I get a quote for Fabric Snap Fasteners in the size and material I need?

Yes. Use the technical drawing and quote form on this page to set the size and options, then send the exact configuration to our team for pricing and lead time.