Hex Flange Bolts are used primarily for structural and machine joints that must be tightened to a controlled preload. This page summarizes where they fit, the industries that rely on them, and the practical points to get right when you specify them — to ISO 1665 / DIN 6921. Stocked across roughly M5 to M24, they cover general to heavy-duty work.
Typical Applications for Hex Flange Bolts
The most common settings where these are specified:
- Structural steel: bolting beams, base plates and bracing where a defined preload and property class are required.
- Automotive & transport: chassis, suspension and powertrain mounting points subject to vibration.
- Heavy machinery: securing gearboxes, frames and guarding on plant that sees shock loads.
- Energy & infrastructure: tower, pylon and pipework supports exposed to weather and long service life.
- General machine building: fastening covers, brackets, motors and sub-assemblies on production equipment.
How to Specify Hex Flange Bolts for Your Application
- Size: Match the nominal size to the mating thread or hole. This product spans M5–M24; check the full table below for the exact dimensions of each size.
- Strength class: Choose the property class (e.g. 8.8, 10.9, 12.9 or A2/A4 stainless) for the load and environment, and tighten to the matching torque so the joint relies on preload, not friction.
- Environment: For damp, coastal or chemical exposure prefer A4/316 stainless or a suitable coating; indoors, plated steel or A2 is usually sufficient.
- Standard: This product is supplied to ISO 1665 / DIN 6921. Quoting the standard on your order guarantees interchangeable dimensions between suppliers.
Where Hex Flange Bolts Are Not the Right Choice
Not for permanent joints that will never be opened (a rivet or weld is cheaper), and not where the head must sit flush — use a countersunk screw instead.