Skip to content
info@engineeringhardware.com
WhatsApp
Request a Quote
Screws · ISO 14582 · Application guide

What Are Hexalobular Socket Countersunk Head Screws, High Head Used For?

Typical applications, the industries that specify hexalobular socket countersunk head screws, high head, and how to choose the right size, material and finish for the joint.

Hexalobular Socket Countersunk Head Screws, High Head are used for a countersunk screw with a high head and hexalobular drive for more torque in a flush joint. They are manufactured to ISO 14582, and the choice of size, property class and finish is driven by the load in the joint and the environment it sits in.

Primary duty
A countersunk screw with a high head and hexalobular drive for more torque in a flush joint
Governing standard
ISO 14582
Thread size range
M3 to M10
Category
Screws

Application notes are general engineering guidance. Verify the property class and any approval requirement against your own design calculation.

What Are Hexalobular Socket Countersunk Head Screws, High Head Used For? application image

Hexalobular Socket Countersunk Head Screws, High Head (ISO 14582) are specified where the joint requires a countersunk screw with a high head and hexalobular drive for more torque in a flush joint. The sections below cover the typical end-uses by industry, the size and material decisions for each, assembly practice, and the applications this fastener type is not suited to. Stocked across roughly M3 to M10, they cover general to heavy-duty work.

Typical Applications for Hexalobular Socket Countersunk Head Screws, High Head

The most common settings where these are specified:

  • Machine building: flush covers tightened hard.
  • Automotive: countersunk fixings with power tools.
  • Aluminum profiles: flush connectors.
  • Tooling: countersunk clamp plates.

How to Specify Hexalobular Socket Countersunk Head Screws, High Head for Your Application

  • Size: Match the nominal size to the mating thread or hole. This product spans M3–M10; check the full table below for the exact dimensions of each size.
  • Drive & head: Pick the drive (socket, cross, slot) and head style for the tool access and seating surface; a recessed drive resists cam-out under power tools.
  • Environment: For damp, coastal or chemical exposure prefer A4/316 stainless or a suitable coating; indoors, plated steel or A2 is usually sufficient.
  • Standard: This product is supplied to ISO 14582. Quoting the standard on your order guarantees interchangeable dimensions between suppliers.

Installation & Assembly Practice

  • Match the driver exactly to the recess (PH ≠ PZ; hex key sizes per ISO 2936) and keep the tool axial — side load is the main cause of stripped drives.
  • In tapped holes, engage a thread length of at least 1× the nominal diameter in steel, 2× in aluminum.
  • Set power tools to a torque that seats the head without embedding it into the mating surface.

Common Selection Mistakes with Hexalobular Socket Countersunk Head Screws, High Head

  • Under-sizing the drive for the installation torque — a small recess at high torque strips before the screw is seated.
  • Using a countersunk head in thin sheet where the countersink removes most of the load-bearing material.
  • Specifying stainless in high-strength duty: A2-70 is roughly class 7 steel, not a 10.9 substitute.

Where Hexalobular Socket Countersunk Head Screws, High Head Are Not the Right Choice

Not for high-preload structural joints (use a property-class bolt and nut), and not in thin sheet where a self-drilling or self-tapping type suits better.

Custom manufacturing · Made to drawing

Need a hexalobular socket countersunk head screws, high head outside the standard range?

Head form and drive can be specified to the assembly rather than to a standard: a larger bearing face, a security drive, or a socket sized for the tool already on the bench. Made by cold heading or warm forging.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

Custom screw manufacturingSend a drawing

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Dimensioned line drawing of M3 Hexalobular Socket Countersunk Head Screws, High Head to ISO 14582. Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.
Pitch P (mm)
0.5
a (mm)
1.0
b (mm)
18.0
Head diameter dk (mm)
7.4
csh_diam (mm)
6.5
csh_height (mm)
2.2
r (mm)
0.1
tt (mm)
T10
A2 (mm)
2.8
t_mean (mm)
1.1
Length range l (mm)
8~30
Sends the selected values to the quote form below.

Request a Quote

The form below follows the current technical drawing configuration. Change the drawing values above and the request details update automatically.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (ISO 14582)

SizePitch P (mm)a (mm)b (mm)Head diameter dk (mm)csh_diam (mm)csh_height (mm)r (mm)tt (mm)A2 (mm)t_mean (mm)Length range l (mm)Reference standard
M30.51.018.07.46.52.20.1T102.81.18~30ISO 14582
M40.71.420.010.029.03.010.2T203.951.68~40ISO 14582
M50.81.622.012.010.83.50.2T254.51.88~50ISO 14582
M61.02.024.014.4413.14.220.25T305.62.28~60ISO 14582
M81.252.528.019.3817.85.690.4T457.932.810~80ISO 14582
M101.53.032.023.021.16.50.4T508.953.312~100ISO 14582
Inside the plant

Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

  1. Wire rod feeding into a cold heading machine
    01

    Cold heading

    Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail.

    Head dimensions and under-head radius checked at set-up and per shift.

  2. Thread rolling machine producing bolt threads
    02

    Thread rolling

    Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch.

    Go / no-go ring gauges to ISO 965 tolerance class 6g.

  3. Baskets of bolts staged for heat treatment
    03

    Heat treatment

    Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it.

    Core hardness and tensile tested per lot to ISO 898-1.

  4. Zinc plated bolts in a treatment basket
    04

    Surface treatment

    Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list.

    Coating thickness and neutral salt spray hours to ISO 9227.

Frequently Asked Questions

How do I choose the right size of Hexalobular Socket Countersunk Head Screws, High Head?

Match the nominal size to the mating thread or hole. This product is available from M3 to M10; the full dimension table on this page lists each size.

What drive type do Hexalobular Socket Countersunk Head Screws, High Head use?

Drive depends on the head style — socket (hex key), cross (Phillips/Pozi) or slot. A recessed drive resists cam-out when driven with power tools; check the product head style on this page.

What material should Hexalobular Socket Countersunk Head Screws, High Head be for outdoor use?

For damp, coastal or chemical environments specify A4 (316) stainless or a suitably coated steel. For indoor or dry use, A2 (304) stainless or zinc-plated steel is normally adequate.

Are Hexalobular Socket Countersunk Head Screws, High Head made to a recognized standard?

Yes — they are manufactured to ISO 14582, so dimensions are interchangeable between suppliers when you quote the standard on your order.

Can I get a quote for Hexalobular Socket Countersunk Head Screws, High Head in the size and material I need?

Yes. Use the technical drawing and quote form on this page to set the size and options, then send the exact configuration to our team for pricing and lead time.