Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.
Sends the selected values to the quote form below.
Request a Quotation for Rod End Bearing — ISO / DIN (Series 108)
Tell us the size, material, finish and quantity you need for Rod End Bearing — ISO / DIN (Series 108) (ISO / DIN) and our team will respond within one business day. Click "Request this configuration" on the drawing above to send the parameters you just chose straight into this form.
Dimensions & Specifications (ISO / DIN)
Every row below is a starting point for the customizer above — pick any size and the drawing will redraw to that row.
Bore d (mm)
Thread size
Pitch (mm)
Total length (mm)
Hex width (mm)
Static load Cor (kN)
Reference standard
5
M5
0.8
40
8
2.2
DIN ISO 12240 / GB/T 9163
6
M6
1.0
46
10
3.0
DIN ISO 12240 / GB/T 9163
8
M8
1.25
57
12
5.0
DIN ISO 12240 / GB/T 9163
10
M10
1.5
71
14
8.0
DIN ISO 12240 / GB/T 9163
12
M12
1.75
84
17
12.0
DIN ISO 12240 / GB/T 9163
16
M16
2.0
105
22
21.0
DIN ISO 12240 / GB/T 9163
20
M20
2.5
131
27
33.0
DIN ISO 12240 / GB/T 9163
25
M24
3.0
160
32
52.0
DIN ISO 12240 / GB/T 9163
Rod End Bearing — ISO / DIN (Series 108) are bearings & bushings manufactured to ISO / DIN. This page lists the full dimensional range with the key specifications engineers need to select and specify them.
What Are Rod End Bearing — ISO / DIN (Series 108)?
Rod End Bearing — ISO / DIN (Series 108) are bearings & bushings defined by ISO / DIN. They are selected by thread size and the dimensional characteristics shown below, and are available in a range of materials and finishes to suit the application and environment.
CAD Source Reference
This page is generated from an original native CAD part model (SolidWorks .SLDPRT) of the rod end bearing — iso / din (series 108) family maintained by our engineering team, covering 2 recorded size configurations. The technical drawing shown above is rebuilt parametrically from the dimensional table, so it always reflects the exact size and configuration you select. Native CAD files (STEP / SLDPRT) can be supplied with your quotation on request.
Materials & Finishes
Common materials include carbon steel (typically zinc plated or hot-dip galvanized), alloy steel in property classes 8.8, 10.9 and 12.9, and stainless steel A2 (304) or A4 (316) for corrosion resistance. Specify the material, property class and surface finish appropriate to your load and environment.
Rod End Bearing — ISO / DIN (Series 108) are stocked and supplied to order. Pricing starts from approximately US$1.50 per piece for standard sizes in carbon steel; final pricing depends on size, material, finish and order quantity (MOQ applies). Submit your exact configuration with the quote form above.
Frequently Asked Questions
What standard and drive type do Rod End Bearing — ISO / DIN (Series 108) use?
Rod End Bearing — ISO / DIN (Series 108) are manufactured to ISO / DIN and use the standard drive for this product family. The dimensional values on this page follow that standard.
What sizes are available for Rod End Bearing — ISO / DIN (Series 108)?
The table on this page lists 8 sizes for Rod End Bearing — ISO / DIN (Series 108), ranging from 5 to 25. Sizes outside the table can be quoted on request.
In which materials are Rod End Bearing — ISO / DIN (Series 108) supplied?
Rod End Bearing — ISO / DIN (Series 108) are supplied in carbon steel and stainless, with finishes including zinc plating, hot-dip galvanizing and black oxide. Choose material and finish to suit the load and the service environment for Rod End Bearing — ISO / DIN (Series 108).
How do I request a quotation?
Use the parametric drawing on this page to set the exact configuration (size, material, finish) and click "Request this configuration" — a specialist from engineeringhardware.com will respond within one business day.
