8 catalogued sizes, dimensioned to DIN 1160. Pick any row and the technical drawing redraws to it.
Clout (Slate) Nails, Standard and Wide Head to DIN 1160: the full dimensional table is reproduced below. 8 sizes are held in the table below, and the technical drawing redraws to whichever row you select.
Standard
DIN 1160
Catalogued sizes
8
Dimensions are nominal values from the governing standard. Confirm the tolerance class for your application before ordering.
Clout (Slate) Nails, Standard and Wide Head — DIN 1160
Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.
Dimensioned line drawing of 25x25 Clout (Slate) Nails, Standard and Wide Head to DIN 1160. Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.
Type
Clout or slate nails
d_1 (mm)
2.5
l (mm)
25
d_2_min (mm)
7
d2_max (mm)
8
Sends the selected values to the quote form below.
Request a Quotation for Clout (Slate) Nails, Standard and Wide Head
The form below follows the current technical drawing configuration. Change the drawing values above and the request details update automatically.
Dimensions & Specifications (DIN 1160)
Every row below is a starting point for the customizer above — pick any size and the drawing will redraw to that row.
Size
Type
d_1 (mm)
l (mm)
d_2_min (mm)
d2_max (mm)
d_3_min (mm)
d3_max (mm)
Reference standard
25x25
Clout or slate nails
2.5
25
7
8
DIN 1160
28x35
Clout or slate nails
2.8
35
8
9
DIN 1160
20x20
Clout or slate wide head nails
2.5
20
7.5
8
DIN 1160
25x25
Clout or slate wide head nails
2.5
25
9
10
DIN 1160
28x25
Clout or slate wide head nails
2.5
25
10
11
DIN 1160
28x35
Clout or slate wide head nails
2.8
30
10
11
DIN 1160
28x35
Clout or slate wide head nails
2.8
35
10
11
DIN 1160
28x35
Clout or slate wide head nails
2.8
40
10
11
DIN 1160
Clout (Slate) Nails, Standard and Wide Head conform to DIN 1160. As nails, they are specified by the dimensions in the table below; this page also covers materials, finishes and typical uses.
What Are Clout (Slate) Nails, Standard and Wide Head?
Clout (Slate) Nails, Standard and Wide Head are nails defined by DIN 1160. They are selected by nominal diameter and the dimensional characteristics shown below, and are available in a range of materials and finishes to suit the application and environment.
Materials & Finishes
Common materials include carbon steel (typically zinc plated or hot-dip galvanized), hardened or case-hardened steel where wear matters, and stainless steel A2 (304) or A4 (316) for corrosion resistance. Specify the material, hardness where relevant, and the surface finish appropriate to your application and environment.
Specification Guides
Each size, material and standard of Clout (Slate) Nails, Standard and Wide Head has its own reference page with the figures for that one configuration.
Goes With
Hardware commonly specified alongside Clout (Slate) Nails, Standard and Wide Head.
Pricing
Clout (Slate) Nails, Standard and Wide Head are supplied to order. Pricing starts from approximately US$0.010 per piece for standard sizes in carbon steel; final pricing depends on size, material, finish and order quantity (MOQ applies). Submit your exact configuration with the quote form above.
Custom manufacturing · Made to drawing
Need a clout (slate) nails, standard and wide head outside the standard range?
Dimensions, material, finish and form are specified from the drawing — a nail outside the standard range is a variation on existing tooling rather than a new design.
Minimum order from 2,000 pieces; samples within 7 days of drawing approval.
This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.
01
Cold heading
Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail.
Head dimensions and under-head radius checked at set-up and per shift.
02
Thread rolling
Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch.
Go / no-go ring gauges to ISO 965 tolerance class 6g.
03
Heat treatment
Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it.
Core hardness and tensile tested per lot to ISO 898-1.
04
Surface treatment
Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list.
Coating thickness and neutral salt spray hours to ISO 9227.
Frequently Asked Questions
What is the controlling standard for Clout (Slate) Nails, Standard and Wide Head?
Clout (Slate) Nails, Standard and Wide Head are manufactured to DIN 1160. The dimensional values on this page follow that standard.
Which sizes of Clout (Slate) Nails, Standard and Wide Head does Engineering Hardware supply?
The table on this page lists 8 sizes for Clout (Slate) Nails, Standard and Wide Head, ranging from 25x25 to 28x35. Sizes outside the table can be quoted on request.
In which materials are Clout (Slate) Nails, Standard and Wide Head supplied?
Clout (Slate) Nails, Standard and Wide Head are supplied in low-carbon and medium-carbon steel, with finishes including zinc plating, hot-dip galvanizing and black oxide. Choose material and finish to suit the load and the service environment for Clout (Slate) Nails, Standard and Wide Head.
How do I request a quotation?
Use the parametric drawing on this page to set the exact configuration (size, material, finish) and click "Request this configuration" — a specialist from Engineering Hardware will respond within one business day.
This website uses only necessary and functional cookies to operate, secure, and improve basic website performance.
We do not use advertising cookies, Google Analytics, or cross-site tracking technologies.
Privacy Policy
