3 catalogued sizes, dimensioned to Trade series (V-band clamps and flanges). Pick any row and the technical drawing redraws to it.
Exhaust V-Band Clamps to Trade series (V-band clamps and flanges): the full dimensional table is reproduced below. 3 sizes are held in the table below, and the technical drawing redraws to whichever row you select.
Standard
Trade series (V-band clamps and flanges)
Catalogued sizes
3
Dimensions are nominal values from the governing standard. Confirm the tolerance class for your application before ordering.
Exhaust V-Band Clamps — Trade series (V-band clamps and flanges)
Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.
Sends the selected values to the quote form below.
Request a Quotation for Exhaust V-Band Clamps
The form below follows the current technical drawing configuration. Change the drawing values above and the request details update automatically.
Dimensions & Specifications (Trade series (V-band clamps and flanges))
Every row below is a starting point for the customizer above — pick any size and the drawing will redraw to that row.
Band section
Flange pair
Material
Service temperature
Joint behaviour
V-section
matched male and female flanges
304 stainless
exhaust gas temperature
self-centring, separable
V-section
matched flat flanges
304 stainless
exhaust gas temperature
self-centring, separable
V-section, heavy
matched male and female flanges
321 stainless
high exhaust gas temperature
self-centring, separable
Manufactured to Trade series (V-band clamps and flanges), Exhaust V-Band Clamps are clamps & couplings supplied by Engineering Hardware. The dimensional data, materials and selection notes are summarized here.
What Are Exhaust V-Band Clamps?
Exhaust V-Band Clamps are clamps & couplings defined by Trade series (V-band clamps and flanges). They are selected by nominal size and the dimensional characteristics shown below, and are available in a range of materials and finishes to suit the application and environment.
Materials & Finishes
Common materials include carbon steel (typically zinc plated or hot-dip galvanized), hardened or case-hardened steel where wear matters, and stainless steel A2 (304) or A4 (316) for corrosion resistance. Specify the material, hardness where relevant, and the surface finish appropriate to your application and environment.
Exhaust V-Band Clamps are supplied to order. Pricing starts from approximately US$1.20 per piece for standard configurations in the material called out on the drawing; final pricing depends on size, material, finish and order quantity (MOQ applies). Submit your exact configuration with the quote form above.
Exhaust V-Band Clamps — Trade series (V-band clamps and flanges)
This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.
01
Cold heading
Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail.
Head dimensions and under-head radius checked at set-up and per shift.
02
Thread rolling
Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch.
Go / no-go ring gauges to ISO 965 tolerance class 6g.
03
Heat treatment
Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it.
Core hardness and tensile tested per lot to ISO 898-1.
04
Surface treatment
Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list.
Coating thickness and neutral salt spray hours to ISO 9227.
Frequently Asked Questions
What standard are Exhaust V-Band Clamps manufactured to?
Exhaust V-Band Clamps are manufactured to Trade series (V-band clamps and flanges). The dimensional values on this page follow that standard.
Which sizes of Exhaust V-Band Clamps does Engineering Hardware supply?
The table on this page lists 3 sizes for Exhaust V-Band Clamps, ranging from V-section to V-section, heavy. Sizes outside the table can be quoted on request.
In which materials are Exhaust V-Band Clamps supplied?
Exhaust V-Band Clamps are supplied in the material specified on the part drawing, with finishes including zinc plating, hot-dip galvanizing and black oxide. Choose material and finish to suit the load and the service environment for Exhaust V-Band Clamps.
How do I request a quotation?
Use the parametric drawing on this page to set the exact configuration (size, material, finish) and click "Request this configuration" — a specialist from Engineering Hardware will respond within one business day.
Need a fastener quote or a spec sheet?Message our engineers on WhatsApp — send a drawing or DIN number and get pricing back fast.Start WhatsApp Chat →
This website uses only necessary and functional cookies to operate, secure, and improve basic website performance.
We do not use advertising cookies, Google Analytics, or cross-site tracking technologies.
Privacy Policy
