2 catalogued sizes, dimensioned to Trade series (riser clamps, MSS SP-58 type 8). Pick any row and the technical drawing redraws to it.
Pipe Riser Clamps to Trade series (riser clamps, MSS SP-58 type 8): the full dimensional table is reproduced below. 2 sizes are held in the table below, and the technical drawing redraws to whichever row you select.
Standard
Trade series (riser clamps, MSS SP-58 type 8)
Catalogued sizes
2
Dimensions are nominal values from the governing standard. Confirm the tolerance class for your application before ordering.
Pipe Riser Clamps — Trade series (riser clamps, MSS SP-58 type 8)
Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.
Sends the selected values to the quote form below.
Request a Quotation for Pipe Riser Clamps
The form below follows the current technical drawing configuration. Change the drawing values above and the request details update automatically.
Dimensions & Specifications (Trade series (riser clamps, MSS SP-58 type 8))
Every row below is a starting point for the customizer above — pick any size and the drawing will redraw to that row.
Load path
Bearing
Orientation
Selected by
vertical pipe weight into the slab
two extended ears on the floor
vertical pipe only
pipe outside diameter
vertical pipe weight into the slab
two extended ears, insulated
vertical insulated pipe
insulated pipe outside diameter
Pipe Riser Clamps are supports, clamps & brackets manufactured to Trade series (riser clamps, MSS SP-58 type 8). This page lists the full dimensional range with the key specifications engineers need to select and specify them.
What Are Pipe Riser Clamps?
Pipe Riser Clamps are supports, clamps & brackets defined by Trade series (riser clamps, MSS SP-58 type 8). They are selected by nominal size and the dimensional characteristics shown below, and are available in a range of materials and finishes to suit the application and environment.
Materials & Finishes
Common materials include carbon steel (typically zinc plated or hot-dip galvanized), hardened or case-hardened steel where wear matters, and stainless steel A2 (304) or A4 (316) for corrosion resistance. Specify the material, hardness where relevant, and the surface finish appropriate to your application and environment.
Pipe Riser Clamps are supplied to order. Pricing starts from approximately US$1.30 per piece for standard configurations in the material called out on the drawing; final pricing depends on size, material, finish and order quantity (MOQ applies). Submit your exact configuration with the quote form above.
Pipe Riser Clamps — Trade series (riser clamps, MSS SP-58 type 8)
This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.
01
Cold heading
Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail.
Head dimensions and under-head radius checked at set-up and per shift.
02
Thread rolling
Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch.
Go / no-go ring gauges to ISO 965 tolerance class 6g.
03
Heat treatment
Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it.
Core hardness and tensile tested per lot to ISO 898-1.
04
Surface treatment
Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list.
Coating thickness and neutral salt spray hours to ISO 9227.
Frequently Asked Questions
What is the controlling standard for Pipe Riser Clamps?
Pipe Riser Clamps are manufactured to Trade series (riser clamps, MSS SP-58 type 8). The dimensional values on this page follow that standard.
What is the size range of Pipe Riser Clamps?
The table on this page lists 2 sizes for Pipe Riser Clamps, ranging from vertical pipe weight into the slab to vertical pipe weight into the slab. Sizes outside the table can be quoted on request.
In which materials are Pipe Riser Clamps supplied?
Pipe Riser Clamps are supplied in the material specified on the part drawing, with finishes including zinc plating, hot-dip galvanizing and black oxide. Choose material and finish to suit the load and the service environment for Pipe Riser Clamps.
How do I request a quotation?
Use the parametric drawing on this page to set the exact configuration (size, material, finish) and click "Request this configuration" — a specialist from Engineering Hardware will respond within one business day.
Need a fastener quote or a spec sheet?Message our engineers on WhatsApp — send a drawing or DIN number and get pricing back fast.Start WhatsApp Chat →
This website uses only necessary and functional cookies to operate, secure, and improve basic website performance.
We do not use advertising cookies, Google Analytics, or cross-site tracking technologies.
Privacy Policy
