Skip to content
info@engineeringhardware.com
WhatsApp
Request a Quote
Catalog

Industrial Fasteners & Engineering Hardware

Browse the full catalog from Engineering Hardware — fasteners to ISO, DIN and GB/T alongside bearings, seals, rigging and made-to-drawing components, organized by category and standard. Every product page lists the complete dimensional table with materials, finishes and a fast quotation path.

Bolts

Hex, reduced-shank, flange, square-head, carriage, shoulder, T-slot and structural bolts plus studs, trapezoidal and threaded rods — metric ISO/DIN and inch ASME series.

Hex Bolts · Shoulder Bolts · Hex Flange Bolts · Studs & Threaded Rods · Lag Screws (Hex Wood Screws) · Eye Bolts

Screws

Socket, Torx (hexalobular), countersunk, oval, pan, cheese, fillister, truss and button head screws, set screws, thumb screws, and self-tapping, thread-forming and wood screws in metric and inch series.

Socket Head Cap Screws · Pan Head Screws · Countersunk Socket Screws · Self-Tapping Screws · Set Screws · Button Head Socket Screws

Nuts

Hex, thin, high, flange, nylon-insert and all-metal lock nuts, fine-thread nuts, weld, cap, square, slotted, coupling, wing, T-slot and profile nuts, in metric and inch series.

Hex Nuts · Thin Hex & Jam Nuts · Hex Flange Nuts · Nyloc Lock Nuts · All-Metal Lock Nuts · T-Slot Nuts

Washers

Flat washers in small, normal, large and extra-large series, clevis-pin and clamping washers, spring, tooth, conical, spherical, sealing and non-metallic washers.

Flat Washers · Spring Lock Washers · Fender Washers · Serrated Lock Washers · Flat Washers, Drawing Series · Spring Washers, Drawing Series

Engineering Reference

Engineering reference tables: thread dimensions, property classes, torque, tap-drill and clearance-hole sizes.

Metric Thread Dimensions · Bolt Property Classes · Tightening Torque Reference · Metric Fine Thread Dimensions · Tap Drill Sizes · Clearance Hole Sizes

Nails

Wire, lost-head, flat-head machine, clout and large-head panel nails, screw-shank nails, gas drive pins and specialty spikes and staples.

Wire Nails · Specialty Nails · Screw-Shank Nails · Upholstery Tacks · Railroad Cut and Dog Spikes · Landscape Fabric Staples

Pins

Parallel, dowel, taper, grooved, coiled and slotted spring, clevis and cotter pins, plus quick-release, indexing and spring plungers.

Dowel Pins · Spring (Roll) Pins · Split Cotter Pins · Taper Pins · CAD Dowel Pins · CAD Clevis Pins

Rivets

Blind (pop), structural, solid, semi-tubular, drive and plastic rivets, lockbolts and panel clips.

Blind (Pop) Rivets · Solid Rivets · CAD Solid Rivets · CAD Blind Rivets · Semi-Tubular Rivets · Drive (Hammer) Rivets

Tools

The tools that install what the catalog sells: hex and Torx keys, driver bits, bit sockets and nut drivers, taps and dies, thread gauges, circlip pliers, rivet-nut and insert setting tools, and torque wrenches to ISO 6789.

Hex Keys (Allen Keys) · Ball-End Hex Keys · Torx Keys · Screwdriver Bits · Bit Sockets & Holders · Nut Drivers

Retaining Rings

External and internal retaining rings (circlips) to DIN 471 / DIN 472, E-clips to DIN 6799, spiral rings, wave circlips that take out end float, and reinforced grip rings for high shaft speeds.

Retaining Rings (Circlips) · E-Clips (External Snap Rings) · CAD Retaining Rings · Spiral Retaining Rings · Wave Circlips · Grip Rings

Keys

Parallel, Woodruff, taper, gib-head and feather machine keys to DIN 6885, DIN 6886, DIN 6887 and DIN 6888 — selected by shaft diameter and by whether the hub must clamp, locate or slide.

Parallel Keys · Woodruff Keys · Taper Keys · Gib-Head Taper Keys · Feather (Sliding) Keys

Springs

Compression, extension and torsion springs to DIN 2098 / 2097 / 2089.

Compression Springs · Extension Springs · Torsion Springs · CAD Compression Springs · CAD Extension Springs

Threaded Inserts

Helical wire thread inserts (thread repair / reinforcement) to DIN 8140.

Helical Thread Inserts · Heat-Set & Molded-In Inserts · Self-Tapping Inserts · Key-Locking Inserts · Tube-End Threaded Inserts · Unthreaded Compression Limiters

Pipe & Pneumatic Fittings

BSP and NPT pipe-thread fittings, hydraulic compression and JIC 37-degree flare fittings, push-in pneumatic fittings, grease nipples to DIN 71412 and socket pipe plugs to DIN 906 / DIN 908.

BSP Pipe Thread Fittings · NPT Pipe Thread Fittings · Hydraulic Compression Fittings · Push-In Pneumatic Fittings · Grease Nipples · Pipe Plugs

Bearings & Bushings

Ball, roller, thrust, housed and rod-end bearings plus flanged bushings.

CAD Rod End Bearings · CAD Ball Bearings · CAD Thrust Bearings · CAD Roller Bearings · CAD Housed Bearings · CAD Bushings

Rigging Hardware

Wire rope, thimbles, turnbuckles and wire-rope clips for lifting and tensioning assemblies.

CAD Wire Rope · CAD Rope Thimbles · CAD Turnbuckles · CAD Wire Rope Clips · Wire Rope Clips · Turnbuckles

Seals

Metric O-rings to ISO 3601 and AS568 inch O-rings, bonded and self-centring USIT seal rings, PTFE thread seal tape and anaerobic thread sealants — selected by cross-section, compound and the fluid they must survive.

CAD O-Rings · AS568 O-Rings (Inch Series) · Metric O-Rings · Bonded Seal Rings · Thread Sealants & Threadlockers

General Components

Source CAD components that do not fit a standard fastener family.

CAD Components

Shaft Collars

Set-screw collars to DIN 705, one- and two-piece clamp collars that grip without marking the shaft, and threaded collars for adjustable stops — for axial location of components on a shaft.

Set Screw Shaft Collars · Clamp Shaft Collars · Threaded Shaft Collars

Standoffs & Spacers

Threaded and unthreaded standoffs, spacers and precision shims used to set and hold a fixed gap between two parts.

Hex Standoffs · Precision Shims · Round & Male-Female Standoffs · PCB Standoffs & Snap-In Supports · Unthreaded Spacers · Slotted & Laminated Shims

Anchors & Concrete Fixings

Mechanical and chemical anchors that create a load-bearing threaded fixing in concrete, masonry and hollow board — selected by drilled hole diameter, embedment depth and the thickness of the fixture being held.

Wedge & Stud Anchors · Sleeve Anchors · Drop-In Anchors · Drive & Nail-In Anchors · Hollow Wall & Toggle Anchors · Lag Shields & Machine Screw Anchors

Supports, Clamps & Brackets

Pipe clips, beam clamps and structural brackets that carry or reinforce a run while separate screws, bolts or rods make the final fastening.

Pipe Clips · Beam Clamps · Structural Brackets · Pipe Hangers · Riser Clamps · Beam C-Clamps

Clamps & Couplings

Hose, band, V-band and sanitary clamps — selected by clamp range and band width rather than by thread size.

Hose Clamps · Band & V-Band Clamps · Sanitary Clamps

Cable & Cord Management

Ties, tie mounts, strain-relief bushings and cordgrips that route and secure cable at a panel or a fixing point.

Cable Ties · Cable Tie Mounts · Strain Relief & Cordgrips · DIN Rail Accessories · P-Clips & Cushioned Clamps

Panel Latches & Catches

Cam, compression and draw latches that close and seal an enclosure door, selected by panel cutout and grip range.

Cam Latches · Compression Latches · Draw Latches · Slam Latches · Toggle Latches · Paddle Latches

Not sure which fastener you need?

Use the finder to filter by category, standard, size and material, then request a quote.

Fastener Finder

Filter by category, standard, size and material to find the right fastener and request a quote.

Request a Quotation

Specification
Business Information