Lifting Eye Bolt manufactured in A2 Stainless Steel (A2-70 (304)) are dimensioned to GB/T 825 / DIN 580. The sections below give the mechanical and physical properties of the grade, its behavior in corrosive and elevated-temperature service, and the full size table.
Why Choose A2 Stainless Steel for Lifting Eye Bolt — GB/T 825 / DIN 580 (Series 037)
The most common stainless grade for indoor and general outdoor fasteners. For lifting eye bolt — gb/t 825 / din 580 (series 037), this matters when good general corrosion resistance is the primary requirement.
Mechanical & Physical Properties
| Grade designation | A2-70 (304) |
|---|---|
| Magnetic response | Largely non-magnetic |
| Service temperature | approx. -200 °C to +400 °C |
| Corrosion characteristic | Good general corrosion resistance |
Corrosion Behavior in Service
A2 (304) gives excellent atmospheric and most-water corrosion resistance and is the most common stainless for Lifting Eye Bolt — GB/T 825 / DIN 580 (Series 037) in indoor and general outdoor service. In chloride-bearing environments (marine air, road salt, swimming pools) consider stepping up to A4 (316).
Comparable Grades
For Lifting Eye Bolt — GB/T 825 / DIN 580 (Series 037), the alternative stainless grade is A4 (316). A2 (304) suits general indoor and outdoor service; A4 (316) adds molybdenum for marine and chloride environments. Where higher strength matters more than corrosion, switch to plated alloy-steel class 8.8 or 10.9.
Sizes of Lifting Eye Bolt — GB/T 825 / DIN 580 (Series 037) Available in A2 Stainless Steel
| Size | Pitch (mm) | Length L (mm) | Head diameter dk (mm) | Head height k (mm) | Hex socket s (mm) | Reference standard |
|---|---|---|---|---|---|---|
| M3 | 0.5 | 20 | 5.5 | 3 | 2.5 | ISO 4762 / GB/T 70.1 |
| M4 | 0.7 | 25 | 7.0 | 4 | 3.0 | ISO 4762 / GB/T 70.1 |
| M5 | 0.8 | 30 | 8.5 | 5 | 4.0 | ISO 4762 / GB/T 70.1 |
| M6 | 1.0 | 40 | 10.0 | 6 | 5.0 | ISO 4762 / GB/T 70.1 |
| M8 | 1.25 | 50 | 13.0 | 8 | 6.0 | ISO 4762 / GB/T 70.1 |
| M10 | 1.5 | 60 | 16.0 | 10 | 8.0 | ISO 4762 / GB/T 70.1 |
| M12 | 1.75 | 80 | 18.0 | 12 | 10.0 | ISO 4762 / GB/T 70.1 |
| M14 | 2.0 | 80 | 21.0 | 14 | 12.0 | ISO 4762 / GB/T 70.1 |
| M16 | 2.0 | 100 | 24.0 | 16 | 14.0 | ISO 4762 / GB/T 70.1 |
| M18 | 2.5 | 100 | 27.0 | 18 | 14.0 | ISO 4762 / GB/T 70.1 |
| M20 | 2.5 | 120 | 30.0 | 20 | 17.0 | ISO 4762 / GB/T 70.1 |
| M24 | 3.0 | 150 | 36.0 | 24 | 19.0 | ISO 4762 / GB/T 70.1 |
| M30 | 3.5 | 180 | 45.0 | 30 | 22.0 | ISO 4762 / GB/T 70.1 |
| M36 | 4.0 | 200 | 54.0 | 36 | 27.0 | ISO 4762 / GB/T 70.1 |