A2 Stainless Steel Slotted Round Nut, Small Series are stocked to GB/T 812. The grade provides good general corrosion resistance and is largely non-magnetic; the practical service range is approx. -200 °C to +400 °C. Property data, grade comparison and the full size table follow.
Why Choose A2 Stainless Steel for Slotted Round Nut, Small Series — GB/T 812 (Series 068)
The most common stainless grade for indoor and general outdoor fasteners. For slotted round nut, small series — gb/t 812 (series 068), this matters when good general corrosion resistance is the primary requirement.
Mechanical & Physical Properties
| Grade designation | A2-70 (304) |
|---|---|
| Magnetic response | Largely non-magnetic |
| Service temperature | approx. -200 °C to +400 °C |
| Corrosion characteristic | Good general corrosion resistance |
Corrosion Behavior in Service
A2 (304) gives excellent atmospheric and most-water corrosion resistance and is the most common stainless for Slotted Round Nut, Small Series — GB/T 812 (Series 068) in indoor and general outdoor service. In chloride-bearing environments (marine air, road salt, swimming pools) consider stepping up to A4 (316).
Galvanic & Galling Considerations
Two important notes for stainless slotted round nut, small series — gb/t 812 (series 068): (1) stainless can gall on stainless threads under load — use a thread lubricant or anti-galling compound, especially for M6 and below; (2) when joined to aluminum or galvanized steel, stainless can drive galvanic corrosion of the less-noble metal in wet service — isolate with a coating or sleeve where appropriate.
Sizes of Slotted Round Nut, Small Series — GB/T 812 (Series 068) Available in A2 Stainless Steel
| Size | Pitch (mm) | Outer diameter D (mm) | Nut height m (mm) | Slot width (mm) | Slot depth (mm) | Reference standard |
|---|---|---|---|---|---|---|
| M10x1.0 | 1.0 | 18 | 8 | 3 | 2 | GB/T 812 / DIN 1804 |
| M12x1.25 | 1.25 | 22 | 8 | 3 | 2 | GB/T 812 / DIN 1804 |
| M16x1.5 | 1.5 | 28 | 8 | 4 | 2.5 | GB/T 812 / DIN 1804 |
| M20x1.5 | 1.5 | 34 | 10 | 4 | 2.5 | GB/T 812 / DIN 1804 |
| M24x1.5 | 1.5 | 40 | 10 | 5 | 3 | GB/T 812 / DIN 1804 |
| M30x1.5 | 1.5 | 48 | 12 | 5 | 3 | GB/T 812 / DIN 1804 |
| M36x1.5 | 1.5 | 58 | 12 | 6 | 3 | GB/T 812 / DIN 1804 |
| M48x1.5 | 1.5 | 72 | 15 | 6 | 4 | GB/T 812 / DIN 1804 |
| M60x2.0 | 2.0 | 90 | 18 | 7 | 4 | GB/T 812 / DIN 1804 |
| M80x2.0 | 2.0 | 115 | 20 | 8 | 5 | GB/T 812 / DIN 1804 |
| M100x2.0 | 2.0 | 140 | 22 | 10 | 5 | GB/T 812 / DIN 1804 |