Skip to content

Washers · GB/T 858

A2 Stainless Steel Tab Lock Washer for Round Nut

A2 Stainless Steel Tab Lock Washer for Round Nut reference image

Material specification page for tab lock washer for round nut in A2 Stainless Steel. Covers the grade designation (A2-70 (304)), corrosion and magnetic behavior, comparable grades and their trade-offs, and the sizes available to GB/T 858.

Why Choose A2 Stainless Steel for Tab Lock Washer for Round Nut — GB/T 858 (Series 073)

The most common stainless grade for indoor and general outdoor fasteners. For tab lock washer for round nut — gb/t 858 (series 073), this matters when good general corrosion resistance is the primary requirement.

Mechanical & Physical Properties

Grade designationA2-70 (304)
Magnetic responseLargely non-magnetic
Service temperatureapprox. -200 °C to +400 °C
Corrosion characteristicGood general corrosion resistance

Corrosion Behavior in Service

A2 (304) gives excellent atmospheric and most-water corrosion resistance and is the most common stainless for Tab Lock Washer for Round Nut — GB/T 858 (Series 073) in indoor and general outdoor service. In chloride-bearing environments (marine air, road salt, swimming pools) consider stepping up to A4 (316).

Comparable Grades

For Tab Lock Washer for Round Nut — GB/T 858 (Series 073), the alternative stainless grade is A4 (316). A2 (304) suits general indoor and outdoor service; A4 (316) adds molybdenum for marine and chloride environments. Where higher strength matters more than corrosion, switch to plated alloy-steel class 8.8 or 10.9.

Sizes of Tab Lock Washer for Round Nut — GB/T 858 (Series 073) Available in A2 Stainless Steel

For shaft / nut sizeInner diameter d1 (mm)Outer diameter d2 (mm)Thickness t (mm)Tab length (mm)Reference standard
M1010.5211.08GB/T 858
M1212.5251.09GB/T 858
M1616.5301.010GB/T 858
M2020.5381.512GB/T 858
M2424.5451.514GB/T 858
M3030.5551.516GB/T 858
M3636.5652.018GB/T 858
M4848.5852.020GB/T 858
M6060.51052.524GB/T 858

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

Adjust the parameters in the drawing above and click "Request this configuration" to send the exact specification straight to this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (GB/T 858)

For shaft / nut sizeInner diameter d1 (mm)Outer diameter d2 (mm)Thickness t (mm)Tab length (mm)Reference standard
M1010.5211.08GB/T 858
M1212.5251.09GB/T 858
M1616.5301.010GB/T 858
M2020.5381.512GB/T 858
M2424.5451.514GB/T 858
M3030.5551.516GB/T 858
M3636.5652.018GB/T 858
M4848.5852.020GB/T 858
M6060.51052.524GB/T 858

Frequently Asked Questions

Are A2 Stainless Steel Tab Lock Washer for Round Nut — GB/T 858 (Series 073) magnetic?

A2 Stainless Steel Tab Lock Washer for Round Nut — GB/T 858 (Series 073) are largely non-magnetic.

What corrosion resistance do A2 Stainless Steel Tab Lock Washer for Round Nut — GB/T 858 (Series 073) offer?

A2 Stainless Steel Tab Lock Washer for Round Nut — GB/T 858 (Series 073) provide good general corrosion resistance with a service range of approx. -200 °C to +400 °C.

Should I choose A2 Stainless Steel or A4 (316) for Tab Lock Washer for Round Nut — GB/T 858 (Series 073)?

For Tab Lock Washer for Round Nut — GB/T 858 (Series 073), A2 Stainless Steel suits general indoor and outdoor use; A4 (316) is preferred for marine, coastal and chemical environments. Choose by corrosion exposure first.

Can A2 Stainless Steel Tab Lock Washer for Round Nut — GB/T 858 (Series 073) gall during installation?

Yes — stainless on stainless is prone to thread galling under load, especially at smaller sizes. Use an anti-galling lubricant or wax thread compound, and slow the tightening rate where possible.

How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.