Round Head Solid Rivet manufactured in A2 Stainless Steel (A2-70 (304)) are dimensioned to GB/T 867 / DIN 660. The sections below give the mechanical and physical properties of the grade, its behavior in corrosive and elevated-temperature service, and the full size table.
Why Choose A2 Stainless Steel for Round Head Solid Rivet — GB/T 867 / DIN 660 (Series 097)
The most common stainless grade for indoor and general outdoor fasteners. For round head solid rivet — gb/t 867 / din 660 (series 097), this matters when good general corrosion resistance is the primary requirement.
Mechanical & Physical Properties
| Grade designation | A2-70 (304) |
|---|---|
| Magnetic response | Largely non-magnetic |
| Service temperature | approx. -200 °C to +400 °C |
| Corrosion characteristic | Good general corrosion resistance |
Corrosion Behavior in Service
A2 (304) gives excellent atmospheric and most-water corrosion resistance and is the most common stainless for Round Head Solid Rivet — GB/T 867 / DIN 660 (Series 097) in indoor and general outdoor service. In chloride-bearing environments (marine air, road salt, swimming pools) consider stepping up to A4 (316).
Comparable Grades
For Round Head Solid Rivet — GB/T 867 / DIN 660 (Series 097), the alternative stainless grade is A4 (316). A2 (304) suits general indoor and outdoor service; A4 (316) adds molybdenum for marine and chloride environments. Where higher strength matters more than corrosion, switch to plated alloy-steel class 8.8 or 10.9.
Sizes of Round Head Solid Rivet — GB/T 867 / DIN 660 (Series 097) Available in A2 Stainless Steel
| Nominal diameter (mm) | Length L (mm) | Head diameter dk (mm) | Head height k (mm) | Material | Reference standard |
|---|---|---|---|---|---|
| 2.5 | 8 | 5 | 1.6 | Aluminum | GB/T 867 / DIN 660 |
| 3 | 10 | 6 | 1.9 | Aluminum | GB/T 867 / DIN 660 |
| 4 | 16 | 8 | 2.5 | Carbon steel | GB/T 867 / DIN 660 |
| 5 | 20 | 10 | 3.1 | Carbon steel | GB/T 867 / DIN 660 |
| 6 | 25 | 12 | 3.8 | Carbon steel | GB/T 867 / DIN 660 |
| 8 | 32 | 16 | 5.0 | Carbon steel | GB/T 867 / DIN 660 |
| 10 | 40 | 20 | 6.3 | Carbon steel | GB/T 867 / DIN 660 |
| 12 | 50 | 24 | 7.5 | Carbon steel | GB/T 867 / DIN 660 |