Mechanical properties, corrosion behaviour and the full dimensional range for this grade.
A2 Stainless Steel Turnbuckle are supplied to ISO 3506 group A2 (304 / 1.4301), commonly supplied A2-70. Corrosion behaviour is good general corrosion resistance, the material is largely non-magnetic, and the usable service range is approx. -200 °C to +400 °C, subject to the property class and the joint. In practice this grade is the most common stainless group for indoor and general outdoor fasteners.
Grade
ISO 3506 group A2 (304 / 1.4301), commonly supplied A2-70
Corrosion resistance
Good general corrosion resistance
Magnetic response
Largely non-magnetic
Service temperature
approx. -200 °C to +400 °C, subject to the property class and the joint
Property values are typical for the grade. Certified mechanical test data is available on request for production orders.
Hidden Deck Fasteners Sourcing: Manufacturing, Types & Material Compatibility
A2 Stainless Steel is not a material turnbuckle are supplied in. Turnbuckle are threaded fasteners, and this combination does not describe a part that exists.
Need this rigging hardware in a grade that is not listed?
A2 Stainless Steel is one of the grades the catalog describes. A non-standard rigging hardware is quoted from the drawing; where one already exists in the catalog, the special is usually a variation on its tooling. Made by hot forging.
Minimum order from 2,000 pieces; samples within 7 days of drawing approval.
Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.
Dimensioned line drawing of M6 Turnbuckle — ISO / DIN (Series 156). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.
Total length closed (mm)
105
Take-up length (mm)
75
Working load limit (kg)
80
Material
Drop-forged steel, hot-dip galvanized
Opens a short step to confirm the exact specification before you enter contact details.
Request a Quote
Click “Request this configuration” under the drawing to confirm the exact specification, then add your contact details. You can also send the request without a specification — but only an accurate selection gets an accurate quote.
Dimensions & Specifications (ISO / DIN)
Thread size
Total length closed (mm)
Take-up length (mm)
Working load limit (kg)
Material
Reference standard
M6
105
75
80
Drop-forged steel, hot-dip galvanized
DIN 1480 / GB/T 5973
M8
125
90
140
Drop-forged steel, hot-dip galvanized
DIN 1480 / GB/T 5973
M10
150
110
230
Drop-forged steel, hot-dip galvanized
DIN 1480 / GB/T 5973
M12
180
135
340
Drop-forged steel, hot-dip galvanized
DIN 1480 / GB/T 5973
M16
230
170
700
Drop-forged steel, hot-dip galvanized
DIN 1480 / GB/T 5973
M20
290
215
1200
Drop-forged steel, hot-dip galvanized
DIN 1480 / GB/T 5973
M24
355
260
1800
Drop-forged steel, hot-dip galvanized
DIN 1480 / GB/T 5973
M30
420
320
3200
Drop-forged steel, hot-dip galvanized
DIN 1480 / GB/T 5973
Materials & Grades
Select a material class to see the grades we supply it in. Each designation is listed with its ISO/EN, AISI/SAE, JIS and GB equivalents.
Third-party video, selected automatically for this topic. It is not produced by Engineering Hardware and is not a specification source — use the tables on this page for dimensional data.
Inside the plant
Manufactured in our own plant
This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.
01
Cold heading
Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail.
Head dimensions and under-head radius checked at set-up and per shift.
02
Thread rolling
Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch.
Go / no-go ring gauges to ISO 965 tolerance class 6g.
03
Heat treatment
Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it.
Core hardness and tensile tested per lot to ISO 898-1.
04
Surface treatment
Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list.
Coating thickness and neutral salt spray hours to ISO 9227.
Frequently Asked Questions
Are A2 Stainless Steel Turnbuckle — ISO / DIN (Series 156) magnetic?
A2 Stainless Steel Turnbuckle — ISO / DIN (Series 156) are largely non-magnetic.
What corrosion resistance do A2 Stainless Steel Turnbuckle — ISO / DIN (Series 156) offer?
A2 Stainless Steel Turnbuckle — ISO / DIN (Series 156) provide good general corrosion resistance with a service range of approx. -200 °C to +400 °C, subject to the property class and the joint.
Should I choose A2 Stainless Steel or A4 (316) for Turnbuckle — ISO / DIN (Series 156)?
For Turnbuckle — ISO / DIN (Series 156), A2 Stainless Steel suits general indoor and outdoor use; A4 (316) is preferred for marine, coastal and chemical environments. Choose by corrosion exposure first.
Can A2 Stainless Steel Turnbuckle — ISO / DIN (Series 156) gall during installation?
Yes — stainless on stainless is prone to thread galling under load, especially at smaller sizes. Use an anti-galling lubricant or wax thread compound, and slow the tightening rate where possible.
How do I request a quotation?
Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.
Need a fastener quote or a spec sheet?Message our engineers on WhatsApp — send a drawing or DIN number and get pricing back fast.Start WhatsApp Chat →
This website uses only necessary and functional cookies to operate, secure, and improve basic website performance.
We do not use advertising cookies, Google Analytics, or cross-site tracking technologies.
Privacy Policy
