Material specification page for e-clips (external snap rings) in A2 Stainless Steel. Covers the grade designation (A2-70 (304)), corrosion and magnetic behavior, comparable grades and their trade-offs, and the sizes available to DIN 6799.
Why Choose A2 Stainless Steel for E-Clips (External Snap Rings)
The most common stainless grade for indoor and general outdoor fasteners. For e-clips (external snap rings), this matters when good general corrosion resistance is the primary requirement.
Mechanical & Physical Properties
| Grade designation | A2-70 (304) |
|---|---|
| Magnetic response | Largely non-magnetic |
| Service temperature | approx. -200 °C to +400 °C |
| Corrosion characteristic | Good general corrosion resistance |
Corrosion Behavior in Service
A2 (304) gives excellent atmospheric and most-water corrosion resistance and is the most common stainless for E-Clips (External Snap Rings) in indoor and general outdoor service. In chloride-bearing environments (marine air, road salt, swimming pools) consider stepping up to A4 (316).
Comparable Grades
For E-Clips (External Snap Rings), the alternative stainless grade is A4 (316). A2 (304) suits general indoor and outdoor service; A4 (316) adds molybdenum for marine and chloride environments. Where higher strength matters more than corrosion, switch to plated alloy-steel class 8.8 or 10.9.
Sizes of E-Clips (External Snap Rings) Available in A2 Stainless Steel
| Groove diameter (mm) | Shaft diameter range (mm) | Outside diameter (mm) | Thickness s (mm) | Reference standard | Notes |
|---|---|---|---|---|---|
| 1.2 | 1.4~2.0 | 3.0 | 0.3 | DIN 6799 | E-clip, radial-fit external retaining |
| 1.5 | 2.0~2.5 | 3.8 | 0.4 | DIN 6799 | E-clip, radial-fit external retaining |
| 1.9 | 2.5~3.2 | 4.8 | 0.4 | DIN 6799 | E-clip, radial-fit external retaining |
| 2.3 | 3.2~4.0 | 6.0 | 0.6 | DIN 6799 | E-clip, radial-fit external retaining |
| 3.2 | 4.0~5.0 | 7.4 | 0.6 | DIN 6799 | E-clip, radial-fit external retaining |
| 4.0 | 5.0~7.0 | 9.0 | 0.7 | DIN 6799 | E-clip, radial-fit external retaining |
| 5.0 | 7.0~9.0 | 11.0 | 0.7 | DIN 6799 | E-clip, radial-fit external retaining |
| 6.0 | 9.0~11.0 | 12.2 | 0.8 | DIN 6799 | E-clip, radial-fit external retaining |
| 7.0 | 11.0~14.0 | 14.3 | 0.9 | DIN 6799 | E-clip, radial-fit external retaining |
| 8.0 | 14.0~18.0 | 16.2 | 1.0 | DIN 6799 | E-clip, radial-fit external retaining |
| 9.0 | 18.0~24.0 | 18.0 | 1.0 | DIN 6799 | E-clip, radial-fit external retaining |
| 10.0 | 24.0~31.0 | 20.2 | 1.2 | DIN 6799 | E-clip, radial-fit external retaining |
| 12.0 | 31.0~38.0 | 23.2 | 1.2 | DIN 6799 | E-clip, radial-fit external retaining |
| 15.0 | 38.0~45.0 | 29.0 | 1.5 | DIN 6799 | E-clip, radial-fit external retaining |
| 19.0 | 45.0~55.0 | 37.0 | 1.75 | DIN 6799 | E-clip, radial-fit external retaining |
| 24.0 | 55.0~70.0 | 44.0 | 2.0 | DIN 6799 | E-clip, radial-fit external retaining |