Material specification page for taper pins in A2 Stainless Steel. Covers the grade designation (A2-70 (304)), corrosion and magnetic behavior, comparable grades and their trade-offs, and the sizes available to ISO 2339 / DIN 1.
Why Choose A2 Stainless Steel for Taper Pins
The most common stainless grade for indoor and general outdoor fasteners. For taper pins, this matters when good general corrosion resistance is the primary requirement.
Mechanical & Physical Properties
| Grade designation | A2-70 (304) |
|---|---|
| Magnetic response | Largely non-magnetic |
| Service temperature | approx. -200 °C to +400 °C |
| Corrosion characteristic | Good general corrosion resistance |
Corrosion Behavior in Service
A2 (304) gives excellent atmospheric and most-water corrosion resistance and is the most common stainless for Taper Pins in indoor and general outdoor service. In chloride-bearing environments (marine air, road salt, swimming pools) consider stepping up to A4 (316).
Comparable Grades
For Taper Pins, the alternative stainless grade is A4 (316). A2 (304) suits general indoor and outdoor service; A4 (316) adds molybdenum for marine and chloride environments. Where higher strength matters more than corrosion, switch to plated alloy-steel class 8.8 or 10.9.
Sizes of Taper Pins Available in A2 Stainless Steel
| Small-end diameter (mm) | Taper | Common length range (mm) | Material | Reference standard | Notes |
|---|---|---|---|---|---|
| 0.6 | 1:50 | 4~16 | Carbon steel / stainless | ISO 2339 / DIN 1 (type A) | Large end = small end + length/50 |
| 0.8 | 1:50 | 5~20 | Carbon steel / stainless | ISO 2339 / DIN 1 (type A) | Large end = small end + length/50 |
| 1.0 | 1:50 | 6~25 | Carbon steel / stainless | ISO 2339 / DIN 1 (type A) | Large end = small end + length/50 |
| 1.2 | 1:50 | 6~25 | Carbon steel / stainless | ISO 2339 / DIN 1 (type A) | Large end = small end + length/50 |
| 1.5 | 1:50 | 8~32 | Carbon steel / stainless | ISO 2339 / DIN 1 (type A) | Large end = small end + length/50 |
| 2.0 | 1:50 | 10~45 | Carbon steel / stainless | ISO 2339 / DIN 1 (type A) | Large end = small end + length/50 |
| 2.5 | 1:50 | 12~50 | Carbon steel / stainless | ISO 2339 / DIN 1 (type A) | Large end = small end + length/50 |
| 3.0 | 1:50 | 14~55 | Carbon steel / stainless | ISO 2339 / DIN 1 (type A) | Large end = small end + length/50 |
| 4.0 | 1:50 | 16~70 | Carbon steel / stainless | ISO 2339 / DIN 1 (type A) | Large end = small end + length/50 |
| 5.0 | 1:50 | 18~90 | Carbon steel / stainless | ISO 2339 / DIN 1 (type A) | Large end = small end + length/50 |
| 6.0 | 1:50 | 22~110 | Carbon steel / stainless | ISO 2339 / DIN 1 (type A) | Large end = small end + length/50 |
| 8.0 | 1:50 | 28~140 | Carbon steel / stainless | ISO 2339 / DIN 1 (type A) | Large end = small end + length/50 |
| 10.0 | 1:50 | 35~180 | Carbon steel / stainless | ISO 2339 / DIN 1 (type A) | Large end = small end + length/50 |
| 12.0 | 1:50 | 45~200 | Carbon steel / stainless | ISO 2339 / DIN 1 (type A) | Large end = small end + length/50 |
| 16.0 | 1:50 | 55~200 | Carbon steel / stainless | ISO 2339 / DIN 1 (type A) | Large end = small end + length/50 |
| 20.0 | 1:50 | 65~200 | Carbon steel / stainless | ISO 2339 / DIN 1 (type A) | Large end = small end + length/50 |
| 25.0 | 1:50 | 80~200 | Carbon steel / stainless | ISO 2339 / DIN 1 (type A) | Large end = small end + length/50 |
| 30.0 | 1:50 | 100~200 | Carbon steel / stainless | ISO 2339 / DIN 1 (type A) | Large end = small end + length/50 |
| 40.0 | 1:50 | 120~200 | Carbon steel / stainless | ISO 2339 / DIN 1 (type A) | Large end = small end + length/50 |
| 50.0 | 1:50 | 160~200 | Carbon steel / stainless | ISO 2339 / DIN 1 (type A) | Large end = small end + length/50 |