Skip to content

Washers · GB/T 858

A4 Stainless Steel Tab Lock Washer for Round Nut

A4 Stainless Steel Tab Lock Washer for Round Nut reference image

Tab Lock Washer for Round Nut manufactured in A4 Stainless Steel (A4-80 (316)) are dimensioned to GB/T 858. The sections below give the mechanical and physical properties of the grade, its behavior in corrosive and elevated-temperature service, and the full size table.

Why Choose A4 Stainless Steel for Tab Lock Washer for Round Nut — GB/T 858 (Series 089)

Specified for marine, coastal and chemical applications. For tab lock washer for round nut — gb/t 858 (series 089), this matters when superior, including marine and chloride environments is the primary requirement.

Mechanical & Physical Properties

Grade designationA4-80 (316)
Magnetic responseLargely non-magnetic
Service temperatureapprox. -200 °C to +400 °C
Corrosion characteristicSuperior, including marine and chloride environments

Corrosion Behavior in Service

A4 (316) adds 2–3% molybdenum to the A2 (304) composition, which dramatically improves resistance to chloride-pitting corrosion. For Tab Lock Washer for Round Nut — GB/T 858 (Series 089) in marine, coastal, swimming-pool or food-processing environments, A4 is the default selection.

Comparable Grades

For Tab Lock Washer for Round Nut — GB/T 858 (Series 089), the alternative stainless grade is A2 (304). A2 (304) suits general indoor and outdoor service; A4 (316) adds molybdenum for marine and chloride environments. Where higher strength matters more than corrosion, switch to plated alloy-steel class 8.8 or 10.9.

Sizes of Tab Lock Washer for Round Nut — GB/T 858 (Series 089) Available in A4 Stainless Steel

For shaft / nut sizeInner diameter d1 (mm)Outer diameter d2 (mm)Thickness t (mm)Tab length (mm)Reference standard
M1010.5211.08GB/T 858
M1212.5251.09GB/T 858
M1616.5301.010GB/T 858
M2020.5381.512GB/T 858
M2424.5451.514GB/T 858
M3030.5551.516GB/T 858
M3636.5652.018GB/T 858
M4848.5852.020GB/T 858
M6060.51052.524GB/T 858

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

Adjust the parameters in the drawing above and click "Request this configuration" to send the exact specification straight to this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (GB/T 858)

For shaft / nut sizeInner diameter d1 (mm)Outer diameter d2 (mm)Thickness t (mm)Tab length (mm)Reference standard
M1010.5211.08GB/T 858
M1212.5251.09GB/T 858
M1616.5301.010GB/T 858
M2020.5381.512GB/T 858
M2424.5451.514GB/T 858
M3030.5551.516GB/T 858
M3636.5652.018GB/T 858
M4848.5852.020GB/T 858
M6060.51052.524GB/T 858

Frequently Asked Questions

Can A4 Stainless Steel Tab Lock Washer for Round Nut — GB/T 858 (Series 089) be used with aluminum?

Yes, but stainless drives mild galvanic corrosion of aluminum in wet service — isolate with a coating, sleeve or paint, or accept the trade-off if the joint is dry and indoor.

What's the service temperature limit for A4 Stainless Steel?

The practical service range is approx. -200 °C to +400 °C.

Can A4 Stainless Steel replace plated alloy steel structurally?

Only at the standard strength classes — A2-70 / A4-80 are roughly equivalent to class 7 steel; A4-100 reaches class 8.8. For class 10.9 or 12.9 strength, plated alloy steel is required.

Are A4 Stainless Steel Tab Lock Washer for Round Nut — GB/T 858 (Series 089) magnetic?

A4 Stainless Steel Tab Lock Washer for Round Nut — GB/T 858 (Series 089) are largely non-magnetic.

How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.