Skip to content

Bearings & Bushings · ISO / DIN

A4 Stainless Steel Needle Roller Bearing — ISO / DIN (Series 133)

A4 Stainless Steel Needle Roller Bearing — ISO / DIN (Series 133) pairs the standard ISO / DIN with a A4 Stainless Steel base material. The sections below cover why engineers select this grade for needle roller bearing — iso / din (series 133), its corrosion and temperature behavior, and the sizes available.

Why Choose A4 Stainless Steel for Needle Roller Bearing — ISO / DIN (Series 133)

Specified for marine, coastal and chemical applications. For needle roller bearing — iso / din (series 133), this matters when superior, including marine and chloride environments is the primary requirement.

Mechanical & Physical Properties

Grade designationA4-80 (316)
Magnetic responseLargely non-magnetic
Service temperatureapprox. -200 °C to +400 °C
Corrosion characteristicSuperior, including marine and chloride environments

Corrosion Behavior in Service

A4 (316) adds 2–3% molybdenum to the A2 (304) composition, which dramatically improves resistance to chloride-pitting corrosion. For Needle Roller Bearing — ISO / DIN (Series 133) in marine, coastal, swimming-pool or food-processing environments, A4 is the default selection.

Comparable Grades

For Needle Roller Bearing — ISO / DIN (Series 133), the alternative stainless grade is A2 (304). A2 (304) suits general indoor and outdoor service; A4 (316) adds molybdenum for marine and chloride environments. Where higher strength matters more than corrosion, switch to plated alloy-steel class 8.8 or 10.9.

Sizes of Needle Roller Bearing — ISO / DIN (Series 133) Available in A4 Stainless Steel

Bore d (mm)Outer diameter D (mm)Width B (mm)Dynamic load C (kN)Reference standard
815127.2ISO 1206 / GB/T 309
1017128.3ISO 1206 / GB/T 309
1219129.65ISO 1206 / GB/T 309
15231212.5ISO 1206 / GB/T 309
20281618.7ISO 1206 / GB/T 309
25331622.8ISO 1206 / GB/T 309
30402033.0ISO 1206 / GB/T 309
40502042.5ISO 1206 / GB/T 309

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

Adjust the parameters in the drawing above and click "Request this configuration" to send the exact specification straight to this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (ISO / DIN)

Bore d (mm)Outer diameter D (mm)Width B (mm)Dynamic load C (kN)Reference standard
815127.2ISO 1206 / GB/T 309
1017128.3ISO 1206 / GB/T 309
1219129.65ISO 1206 / GB/T 309
15231212.5ISO 1206 / GB/T 309
20281618.7ISO 1206 / GB/T 309
25331622.8ISO 1206 / GB/T 309
30402033.0ISO 1206 / GB/T 309
40502042.5ISO 1206 / GB/T 309

Frequently Asked Questions

Can A4 Stainless Steel Needle Roller Bearing — ISO / DIN (Series 133) be used with aluminum?

Yes, but stainless drives mild galvanic corrosion of aluminum in wet service — isolate with a coating, sleeve or paint, or accept the trade-off if the joint is dry and indoor.

What's the service temperature limit for A4 Stainless Steel?

The practical service range is approx. -200 °C to +400 °C.

Can A4 Stainless Steel replace plated alloy steel structurally?

Only at the standard strength classes — A2-70 / A4-80 are roughly equivalent to class 7 steel; A4-100 reaches class 8.8. For class 10.9 or 12.9 strength, plated alloy steel is required.

Are A4 Stainless Steel Needle Roller Bearing — ISO / DIN (Series 133) magnetic?

A4 Stainless Steel Needle Roller Bearing — ISO / DIN (Series 133) are largely non-magnetic.

How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.