Mechanical properties, corrosion behaviour and the full dimensional range for this grade.
A4 Stainless Steel Wire Rope are supplied to ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80. Corrosion behaviour is superior, including marine and chloride environments, the material is largely non-magnetic, and the usable service range is approx. -200 °C to +400 °C, subject to the property class and the joint. In practice this grade is specified for marine, coastal and chemical applications.
Grade
ISO 3506 group A4 (316 / 1.4401), commonly supplied A4-80
Corrosion resistance
Superior, including marine and chloride environments
Magnetic response
Largely non-magnetic
Service temperature
approx. -200 °C to +400 °C, subject to the property class and the joint
Property values are typical for the grade. Certified mechanical test data is available on request for production orders.
Hidden Deck Fasteners Sourcing: Manufacturing, Types & Material Compatibility
A4 Stainless Steel is not a material wire rope are supplied in. Wire Rope are specified by rope diameter, and this combination does not describe a part that exists.
Need this rigging hardware in a grade that is not listed?
A4 Stainless Steel is one of the grades the catalog describes. Dimensions, material, finish and form are specified from the drawing — a rigging hardware outside the standard range is a variation on existing tooling rather than a new design. Made by hot forging.
Minimum order from 2,000 pieces; samples within 7 days of drawing approval.
Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.
Dimensioned line drawing of 4 Wire Rope — ISO / DIN (Series 152). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.
Construction
6x7
Min breaking force (kN)
8.95
Mass (kg/100m)
5.85
Material
Galvanized steel
Sends the selected values to the quote form below.
Request a Quote
The form below follows the current technical drawing configuration. Change the drawing values above and the request details update automatically.
Dimensions & Specifications (ISO / DIN)
Nominal diameter (mm)
Construction
Min breaking force (kN)
Mass (kg/100m)
Material
Reference standard
4
6x7
8.95
5.85
Galvanized steel
GB/T 20118 / ISO 2408
5
6x7
13.4
8.94
Galvanized steel
GB/T 20118 / ISO 2408
6
6x19
17.6
13.0
Galvanized steel
GB/T 20118 / ISO 2408
8
6x19
31.3
23.0
Galvanized steel
GB/T 20118 / ISO 2408
10
6x19
48.5
36.0
Galvanized steel
GB/T 20118 / ISO 2408
12
6x19
69.5
52.0
Galvanized steel
GB/T 20118 / ISO 2408
16
6x37
119
89.0
Galvanized steel
GB/T 20118 / ISO 2408
20
6x37
185
138.0
Galvanized steel
GB/T 20118 / ISO 2408
24
6x37
265
196.0
Galvanized steel
GB/T 20118 / ISO 2408
Materials & Grades
Select a material class to see the grades we supply it in. Each designation is listed with its ISO/EN, AISI/SAE, JIS and GB equivalents.
Third-party video, selected automatically for this topic. It is not produced by Engineering Hardware and is not a specification source — use the tables on this page for dimensional data.
Inside the plant
Manufactured in our own plant
This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.
01
Cold heading
Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail.
Head dimensions and under-head radius checked at set-up and per shift.
02
Thread rolling
Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch.
Go / no-go ring gauges to ISO 965 tolerance class 6g.
03
Heat treatment
Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it.
Core hardness and tensile tested per lot to ISO 898-1.
04
Surface treatment
Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list.
Coating thickness and neutral salt spray hours to ISO 9227.
Frequently Asked Questions
Are A4 Stainless Steel Wire Rope — ISO / DIN (Series 152) magnetic?
A4 Stainless Steel Wire Rope — ISO / DIN (Series 152) are largely non-magnetic.
What corrosion resistance do A4 Stainless Steel Wire Rope — ISO / DIN (Series 152) offer?
A4 Stainless Steel Wire Rope — ISO / DIN (Series 152) provide superior, including marine and chloride environments with a service range of approx. -200 °C to +400 °C, subject to the property class and the joint.
Should I choose A4 Stainless Steel or A2 (304) for Wire Rope — ISO / DIN (Series 152)?
For Wire Rope — ISO / DIN (Series 152), A4 Stainless Steel suits general indoor and outdoor use; A2 (304) is preferred for marine, coastal and chemical environments. Choose by corrosion exposure first.
Can A4 Stainless Steel Wire Rope — ISO / DIN (Series 152) gall during installation?
Yes — stainless on stainless is prone to thread galling under load, especially at smaller sizes. Use an anti-galling lubricant or wax thread compound, and slow the tightening rate where possible.
How do I request a quotation?
Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.
This website uses only necessary and functional cookies to operate, secure, and improve basic website performance.
We do not use advertising cookies, Google Analytics, or cross-site tracking technologies.
Privacy Policy
