Material specification page for countersunk socket screws in A4 Stainless Steel. Covers the grade designation (A4-80 (316)), corrosion and magnetic behavior, comparable grades and their trade-offs, and the sizes available to ISO 10642 / DIN 7991.
Why Choose A4 Stainless Steel for Countersunk Socket Screws
Specified for marine, coastal and chemical applications. For countersunk socket screws, this matters when superior, including marine and chloride environments is the primary requirement.
Mechanical & Physical Properties
| Grade designation | A4-80 (316) |
|---|---|
| Magnetic response | Largely non-magnetic |
| Service temperature | approx. -200 °C to +400 °C |
| Corrosion characteristic | Superior, including marine and chloride environments |
Corrosion Behavior in Service
A4 (316) adds 2–3% molybdenum to the A2 (304) composition, which dramatically improves resistance to chloride-pitting corrosion. For Countersunk Socket Screws in marine, coastal, swimming-pool or food-processing environments, A4 is the default selection.
Comparable Grades
For Countersunk Socket Screws, the alternative stainless grade is A2 (304). A2 (304) suits general indoor and outdoor service; A4 (316) adds molybdenum for marine and chloride environments. Where higher strength matters more than corrosion, switch to plated alloy-steel class 8.8 or 10.9.
Sizes of Countersunk Socket Screws Available in A4 Stainless Steel
| Size | Pitch (mm) | Head diameter dk (mm) | Head height k (mm) | Hex key s (mm) | Countersink angle (deg) | Reference standard |
|---|---|---|---|---|---|---|
| M3 | 0.5 | 6.72 | 1.86 | 2.0 | 90 | ISO 10642 / DIN 7991 |
| M4 | 0.7 | 8.96 | 2.48 | 2.5 | 90 | ISO 10642 / DIN 7991 |
| M5 | 0.8 | 11.2 | 3.1 | 3.0 | 90 | ISO 10642 / DIN 7991 |
| M6 | 1.0 | 13.44 | 3.72 | 4.0 | 90 | ISO 10642 / DIN 7991 |
| M8 | 1.25 | 17.92 | 4.96 | 5.0 | 90 | ISO 10642 / DIN 7991 |
| M10 | 1.5 | 22.4 | 6.2 | 6.0 | 90 | ISO 10642 / DIN 7991 |
| M12 | 1.75 | 26.88 | 7.44 | 8.0 | 90 | ISO 10642 / DIN 7991 |
| M14 | 2.0 | 30.0 | 8.4 | 10.0 | 90 | ISO 10642 / DIN 7991 |
| M16 | 2.0 | 33.6 | 9.3 | 10.0 | 90 | ISO 10642 / DIN 7991 |
| M20 | 2.5 | 40.32 | 11.2 | 12.0 | 90 | ISO 10642 / DIN 7991 |
| M24 | 3.0 | 47.04 | 13.0 | 14.0 | 90 | ISO 10642 / DIN 7991 |