Fender Washers manufactured in A4 Stainless Steel (A4-80 (316)) are dimensioned to DIN 9021. The sections below give the mechanical and physical properties of the grade, its behavior in corrosive and elevated-temperature service, and the full size table.
Why Choose A4 Stainless Steel for Fender Washers
Specified for marine, coastal and chemical applications. For fender washers, this matters when superior, including marine and chloride environments is the primary requirement.
Mechanical & Physical Properties
| Grade designation | A4-80 (316) |
|---|---|
| Magnetic response | Largely non-magnetic |
| Service temperature | approx. -200 °C to +400 °C |
| Corrosion characteristic | Superior, including marine and chloride environments |
Corrosion Behavior in Service
A4 (316) adds 2–3% molybdenum to the A2 (304) composition, which dramatically improves resistance to chloride-pitting corrosion. For Fender Washers in marine, coastal, swimming-pool or food-processing environments, A4 is the default selection.
Comparable Grades
For Fender Washers, the alternative stainless grade is A2 (304). A2 (304) suits general indoor and outdoor service; A4 (316) adds molybdenum for marine and chloride environments. Where higher strength matters more than corrosion, switch to plated alloy-steel class 8.8 or 10.9.
Sizes of Fender Washers Available in A4 Stainless Steel
| For bolt size | Inner diameter d1 min (mm) | Outer diameter d2 max (mm) | Thickness h (mm) | Reference standard | Notes |
|---|---|---|---|---|---|
| M3 | 3.2 | 9.0 | 0.8 | DIN 9021 / ISO 7093 | Oversized OD for bearing on soft materials |
| M4 | 4.3 | 12.0 | 1.0 | DIN 9021 / ISO 7093 | Oversized OD for bearing on soft materials |
| M5 | 5.3 | 15.0 | 1.2 | DIN 9021 / ISO 7093 | Oversized OD for bearing on soft materials |
| M6 | 6.4 | 18.0 | 1.6 | DIN 9021 / ISO 7093 | Oversized OD for bearing on soft materials |
| M8 | 8.4 | 24.0 | 2.0 | DIN 9021 / ISO 7093 | Oversized OD for bearing on soft materials |
| M10 | 10.5 | 30.0 | 2.5 | DIN 9021 / ISO 7093 | Oversized OD for bearing on soft materials |
| M12 | 13.0 | 37.0 | 3.0 | DIN 9021 / ISO 7093 | Oversized OD for bearing on soft materials |
| M14 | 15.0 | 44.0 | 3.0 | DIN 9021 / ISO 7093 | Oversized OD for bearing on soft materials |
| M16 | 17.0 | 50.0 | 3.0 | DIN 9021 / ISO 7093 | Oversized OD for bearing on soft materials |
| M20 | 21.0 | 60.0 | 4.0 | DIN 9021 / ISO 7093 | Oversized OD for bearing on soft materials |
| M24 | 25.0 | 72.0 | 5.0 | DIN 9021 / ISO 7093 | Oversized OD for bearing on soft materials |
| M30 | 31.0 | 90.0 | 6.0 | DIN 9021 / ISO 7093 | Oversized OD for bearing on soft materials |
| M36 | 37.0 | 110.0 | 8.0 | DIN 9021 / ISO 7093 | Oversized OD for bearing on soft materials |