A4 Stainless Steel Square Nuts pairs the standard DIN 557 with a A4 Stainless Steel base material. The sections below cover why engineers select this grade for square nuts, its corrosion and temperature behavior, and the sizes available.
Why Choose A4 Stainless Steel for Square Nuts
Specified for marine, coastal and chemical applications. For square nuts, this matters when superior, including marine and chloride environments is the primary requirement.
Mechanical & Physical Properties
| Grade designation | A4-80 (316) |
|---|---|
| Magnetic response | Largely non-magnetic |
| Service temperature | approx. -200 °C to +400 °C |
| Corrosion characteristic | Superior, including marine and chloride environments |
Corrosion Behavior in Service
A4 (316) adds 2–3% molybdenum to the A2 (304) composition, which dramatically improves resistance to chloride-pitting corrosion. For Square Nuts in marine, coastal, swimming-pool or food-processing environments, A4 is the default selection.
Galvanic & Galling Considerations
Two important notes for stainless square nuts: (1) stainless can gall on stainless threads under load — use a thread lubricant or anti-galling compound, especially for M6 and below; (2) when joined to aluminum or galvanized steel, stainless can drive galvanic corrosion of the less-noble metal in wet service — isolate with a coating or sleeve where appropriate.
Sizes of Square Nuts Available in A4 Stainless Steel
| Size | Pitch (mm) | Width across flats s (mm) | Width across corners e min (mm) | Nut height m (mm) | Reference standard | Notes |
|---|---|---|---|---|---|---|
| M5 | 0.8 | 8.0 | 11.1 | 4.0 | DIN 557 / DIN 562 | Square nut, general / channel use |
| M6 | 1.0 | 10.0 | 13.9 | 5.0 | DIN 557 / DIN 562 | Square nut, general / channel use |
| M8 | 1.25 | 13.0 | 18.0 | 6.5 | DIN 557 / DIN 562 | Square nut, general / channel use |
| M10 | 1.5 | 17.0 | 23.6 | 8.0 | DIN 557 / DIN 562 | Square nut, general / channel use |
| M12 | 1.75 | 19.0 | 26.5 | 10.0 | DIN 557 / DIN 562 | Square nut, general / channel use |
| M16 | 2.0 | 24.0 | 33.5 | 13.0 | DIN 557 / DIN 562 | Square nut, general / channel use |
| M20 | 2.5 | 30.0 | 42.0 | 16.0 | DIN 557 / DIN 562 | Square nut, general / channel use |