Property Class 12.9 Steel Clamping Handle Screw (Long) are supplied to DIN 6336 / GN 313. The grade provides requires plating or black-oxide protection and is magnetic; the practical service range is commonly limited to approx. +300 °C; confirm against the coating and the load. Property data, grade comparison and the full size table follow.
Why Choose Property Class 12.9 Steel for Clamping Handle Screw (Long) — DIN 6336 / GN 313 (Series 044)
The highest common strength class, for high-load machine assembly. For clamping handle screw (long) — din 6336 / gn 313 (series 044), this matters when requires plating or black-oxide protection is the primary requirement.
Mechanical & Physical Properties
| Grade designation | ISO 898-1 property class 12.9 |
|---|---|
| Magnetic response | Magnetic |
| Service temperature | commonly limited to approx. +300 °C; confirm against the coating and the load |
| Corrosion characteristic | Requires plating or black-oxide protection |
Corrosion Behavior in Service
Carbon and alloy steel clamping handle screw (long) — din 6336 / gn 313 (series 044) require a coating for corrosion protection. Zinc plating (with or without passivation) is the most common; hot-dip galvanizing is used for outdoor structural service; black-oxide is mainly a tarnish-prevention finish for tool-room use.
Galvanic & Galling Considerations
For clamping handle screw (long) — din 6336 / gn 313 (series 044) in steel, the dominant compatibility issue is hydrogen embrittlement at high property classes (10.9 and above) when electroplated. Plating must be followed by an appropriate baking treatment, or a non-electroplated finish (mechanical zinc, zinc flake) should be substituted.
Sizes of Clamping Handle Screw (Long) — DIN 6336 / GN 313 (Series 044) Available in Property Class 12.9 Steel
| Thread size | Pitch (mm) | Length L (mm) | Handle length (mm) | Knob diameter (mm) | Reference standard |
|---|---|---|---|---|---|
| M5 | 0.8 | 20 | 45 | 28 | DIN 6336 / GN 313 |
| M6 | 1.0 | 25 | 50 | 32 | DIN 6336 / GN 313 |
| M8 | 1.25 | 30 | 60 | 40 | DIN 6336 / GN 313 |
| M10 | 1.5 | 40 | 70 | 45 | DIN 6336 / GN 313 |
| M12 | 1.75 | 50 | 80 | 50 | DIN 6336 / GN 313 |
