Skip to content

General Components · GB/T 6170 / ISO 4032

Grade 12.9 Steel CDZZ Limit Post

Grade 12.9 Steel CDZZ Limit Post reference image

Grade 12.9 Steel (class 12.9) is the highest common strength class, for high-load machine assembly. When cdzz limit post are specified in this grade, the dimensions remain per GB/T 6170 / ISO 4032; the material determines corrosion behavior (requires plating or black-oxide protection) and the service temperature range (up to approx. +300 °C). Both are covered below with the size table.

Why Choose Grade 12.9 Steel for CDZZ Limit Post — GB/T 6170 / ISO 4032 (Series 062)

The highest common strength class, for high-load machine assembly. For cdzz limit post — gb/t 6170 / iso 4032 (series 062), this matters when requires plating or black-oxide protection is the primary requirement.

Mechanical & Physical Properties

Grade designationclass 12.9
Magnetic responseMagnetic
Service temperatureup to approx. +300 °C
Corrosion characteristicRequires plating or black-oxide protection

Galvanic & Galling Considerations

For cdzz limit post — gb/t 6170 / iso 4032 (series 062) in steel, the dominant compatibility issue is hydrogen embrittlement at high property classes (10.9 and above) when electroplated. Plating must be followed by an appropriate baking treatment, or a non-electroplated finish (mechanical zinc, zinc flake) should be substituted.

Comparable Grades

For CDZZ Limit Post — GB/T 6170 / ISO 4032 (Series 062), class 8.8 is the comparable strength step. Move up when the joint preload approaches the proof load of the current class; move down when the joint is over-specified. For corrosion-critical service, switch to stainless A2 or A4.

Sizes of CDZZ Limit Post — GB/T 6170 / ISO 4032 (Series 062) Available in Grade 12.9 Steel

Size designationOuter diameter / width (mm)Length / height (mm)Bore / thread (mm)MaterialReference standard
Size 110206C45 carbon steelGB/T 1804-m
Size 212258C45 carbon steelGB/T 1804-m
Size 3163210C45 carbon steelGB/T 1804-m
Size 4204012C45 carbon steelGB/T 1804-m
Size 5255016C45 carbon steelGB/T 1804-m
Size 6326320C45 carbon steelGB/T 1804-m
Size 7408025C45 carbon steelGB/T 1804-m
Size 85010030C45 carbon steelGB/T 1804-m

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

Adjust the parameters in the drawing above and click "Request this configuration" to send the exact specification straight to this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (GB/T 6170 / ISO 4032)

Size designationOuter diameter / width (mm)Length / height (mm)Bore / thread (mm)MaterialReference standard
Size 110206C45 carbon steelGB/T 1804-m
Size 212258C45 carbon steelGB/T 1804-m
Size 3163210C45 carbon steelGB/T 1804-m
Size 4204012C45 carbon steelGB/T 1804-m
Size 5255016C45 carbon steelGB/T 1804-m
Size 6326320C45 carbon steelGB/T 1804-m
Size 7408025C45 carbon steelGB/T 1804-m
Size 85010030C45 carbon steelGB/T 1804-m

Frequently Asked Questions

When should I move from class 12.9 to class 8.8 for CDZZ Limit Post — GB/T 6170 / ISO 4032 (Series 062)?

Step up to class 8.8 when the joint preload approaches the proof load of the current class. The higher class adds preload at the same diameter, often saving size and weight.

Is Grade 12.9 Steel prone to hydrogen embrittlement?

Class 10.9 and above can be susceptible to hydrogen embrittlement when electroplated. Specify post-plating baking, or use mechanical-zinc / zinc-flake finishes which avoid the cathodic plating step.

Which finish is best for outdoor CDZZ Limit Post — GB/T 6170 / ISO 4032 (Series 062)?

For outdoor service in steel, hot-dip galvanizing gives the longest life; zinc-flake (Geomet/Delta-Tone family) gives a thinner film with excellent salt-spray performance; standard zinc plating is the lowest-cost option for general indoor / shielded outdoor use.

What's the service temperature limit for Grade 12.9 Steel?

The practical service range is up to approx. +300 °C.

How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.