Choosing Housed (Pillow Block) Bearing — ISO / DIN (Series 117) in Grade 12.9 Steel comes down to matching the grade to the environment: requires plating or black-oxide protection and magnetic. Below are the properties, the full size table, and the grades worth comparing before you commit.
Why Choose Grade 12.9 Steel for Housed (Pillow Block) Bearing — ISO / DIN (Series 117)
The highest common strength class, for high-load machine assembly. For housed (pillow block) bearing — iso / din (series 117), this matters when requires plating or black-oxide protection is the primary requirement.
Mechanical & Physical Properties
| Grade designation | class 12.9 |
|---|---|
| Magnetic response | Magnetic |
| Service temperature | up to approx. +300 °C |
| Corrosion characteristic | Requires plating or black-oxide protection |
Corrosion Behavior in Service
Carbon and alloy steel housed (pillow block) bearing — iso / din (series 117) require a coating for corrosion protection. Zinc plating (with or without passivation) is the most common; hot-dip galvanizing is used for outdoor structural service; black-oxide is mainly a tarnish-prevention finish for tool-room use.
Comparable Grades
For Housed (Pillow Block) Bearing — ISO / DIN (Series 117), class 8.8 is the comparable strength step. Move up when the joint preload approaches the proof load of the current class; move down when the joint is over-specified. For corrosion-critical service, switch to stainless A2 or A4.
Sizes of Housed (Pillow Block) Bearing — ISO / DIN (Series 117) Available in Grade 12.9 Steel
| Shaft size (mm) | Housing length (mm) | Total height (mm) | Bolt center distance (mm) | Bolt size | Reference standard |
|---|---|---|---|---|---|
| 15 | 90 | 38 | 65 | M10 | ISO 113 / GB/T 7813 |
| 20 | 108 | 42 | 75 | M10 | ISO 113 / GB/T 7813 |
| 25 | 127 | 47 | 90 | M12 | ISO 113 / GB/T 7813 |
| 30 | 140 | 55 | 100 | M12 | ISO 113 / GB/T 7813 |
| 35 | 162 | 62 | 115 | M14 | ISO 113 / GB/T 7813 |
| 40 | 175 | 68 | 130 | M14 | ISO 113 / GB/T 7813 |
| 50 | 205 | 75 | 150 | M16 | ISO 113 / GB/T 7813 |
| 60 | 250 | 85 | 180 | M16 | ISO 113 / GB/T 7813 |
| 80 | 300 | 105 | 220 | M20 | ISO 113 / GB/T 7813 |