Property Class 12.9 Steel Electrical Grounding Screws are supplied to ISO 898-1 property class 12.9. Corrosion behaviour is requires plating or black-oxide protection, the material is magnetic, and the usable service range is commonly limited to approx. +300 °C; confirm against the coating and the load. In practice this grade is the highest common strength class, for high-load machine assembly.
- Grade
- ISO 898-1 property class 12.9
- Corrosion resistance
- Requires plating or black-oxide protection
- Magnetic response
- Magnetic
- Service temperature
- commonly limited to approx. +300 °C; confirm against the coating and the load
Property values are typical for the grade. Certified mechanical test data is available on request for production orders.
Material page for electrical grounding screws in Property Class 12.9 Steel (ISO 898-1 property class 12.9). The sizes below are the ones we supply; there is no published dimensional standard for this article, so the table rather than a standard number is what to quote. Corrosion behaviour is requires plating or black-oxide protection and the service range is commonly limited to approx. +300 °C; confirm against the coating and the load.
Why Choose Property Class 12.9 Steel for Electrical Grounding Screws
The highest common strength class, for high-load machine assembly. For electrical grounding screws, this matters when requires plating or black-oxide protection is the primary requirement.
Mechanical & Physical Properties
| Grade designation | ISO 898-1 property class 12.9 |
|---|
| Magnetic response | Magnetic |
|---|
| Service temperature | commonly limited to approx. +300 °C; confirm against the coating and the load |
|---|
| Corrosion characteristic | Requires plating or black-oxide protection |
|---|
Corrosion Behavior in Service
Carbon and alloy steel electrical grounding screws require a coating for corrosion protection. Zinc plating (with or without passivation) is the most common; hot-dip galvanizing is used for outdoor structural service; black-oxide is mainly a tarnish-prevention finish for tool-room use.
Comparable Grades
For Electrical Grounding Screws, class 8.8 is the comparable strength step. Move up when the joint preload approaches the proof load of the current class; move down when the joint is over-specified. For corrosion-critical service, switch to stainless A2 or A4.
Sizes of Electrical Grounding Screws Available in Property Class 12.9 Steel
| Thread size | Length (in) | Overall length (in) | Head / drive | Finish | Conductor use |
|---|
| 10-32 | 3/8 | 0.795~0.8 | slotted / two-way or four-way combination | green zinc steel | No. 10, 12 or 14 copper; No. 10 or 12 aluminum |
Dimensions are independent of the material: every size above is available in Property Class 12.9 Steel.
Custom manufacturing · Made to drawing
Need this bolt in a grade that is not listed?
Grade 12 9 Steel is one of the grades the catalog describes. Material and finish are usually what drives a special — a grade the standard part is not stocked in, or a coating chosen against a salt-spray figure instead of a default. Made by cold heading or hot forging.
Minimum order from 2,000 pieces; samples within 7 days of drawing approval.
Custom bolt manufacturingSend a drawing
Applications & Industries
What Electrical Grounding Screws are specified for, industry by industry.
Industries that specify Electrical Grounding Screws
-
Control panels
Combination heads support slot or driver access during installation.
-
Electrical maintenance
Known length and finish simplify replacement of a missing bonding screw.
-
Electrical boxes
Green grounding screws bond a conductor to a steel box.
-
Building wiring
10-32 box threads accept the documented grounding screw form.
-
Maintenance & MRO
Stocked replacements matched to an existing property class, thread and finish.
-
Food, pharma & cleanroom
Stainless assemblies that are washed down, where the finish matters as much as the strength.
Typical applications
- using the green finish to identify the grounding function
- following the conductor and box installation rule
- bonding a conductor to a threaded electrical box hole
- matching the 10-32 thread and 3/8 in screw length
- assemblies that are dismantled for service and re-torqued
- joints where the property class is stated on the drawing
Service conditions to specify against
- Marine and coastal
- Available in A4 (316) stainless for chloride exposure — coastal structures, pool halls, water treatment and deck hardware, where A2 will eventually pit.
- High load
- Supplied in ISO 898-1 property classes, so the joint can be designed to a stated proof load and tightened to a calculated torque rather than by feel.
- Torque and preload
- The joint is designed around bolt tension, so lubrication, coating and the friction coefficient all change the torque figure — state them together.
Where to use something else
- Do not use a green grounding screw as an ordinary panel fastener; its conductor connection and box listing govern the installation.
- Do not use a machine thread into unthreaded sheet or timber; use a tapping screw, rivet nut or insert made for that parent material.
Full application guide: where Electrical Grounding Screws are used, how to specify them, and the cases they are wrong for