Property Class 12.9 Steel Expansion Blind Fasteners for Hollow Section are supplied to ISO 898-1 property class 12.9. Corrosion behaviour is requires plating or black-oxide protection, the material is magnetic, and the usable service range is commonly limited to approx. +300 °C; confirm against the coating and the load. In practice this grade is the highest common strength class, for high-load machine assembly.
- Grade
- ISO 898-1 property class 12.9
- Corrosion resistance
- Requires plating or black-oxide protection
- Magnetic response
- Magnetic
- Service temperature
- commonly limited to approx. +300 °C; confirm against the coating and the load
Property values are typical for the grade. Certified mechanical test data is available on request for production orders.
Property Class 12.9 Steel Expansion Blind Fasteners for Hollow Section are supplied to our own published dimensions — this is a trade-series article rather than one covered by a dimensional standard, so confirm the figures against the part you are replacing. The grade provides requires plating or black-oxide protection and is magnetic; the practical service range is commonly limited to approx. +300 °C; confirm against the coating and the load.
Why Choose Property Class 12.9 Steel for Expansion Blind Fasteners for Hollow Section
The highest common strength class, for high-load machine assembly. For expansion blind fasteners for hollow section, this matters when requires plating or black-oxide protection is the primary requirement.
Mechanical & Physical Properties
| Grade designation | ISO 898-1 property class 12.9 |
|---|
| Magnetic response | Magnetic |
|---|
| Service temperature | commonly limited to approx. +300 °C; confirm against the coating and the load |
|---|
| Corrosion characteristic | Requires plating or black-oxide protection |
|---|
Galvanic & Galling Considerations
For expansion blind fasteners for hollow section in steel, the dominant compatibility issue is hydrogen embrittlement at high property classes (10.9 and above) when electroplated. Plating must be followed by an appropriate baking treatment, or a non-electroplated finish (mechanical zinc, zinc flake) should be substituted.
Comparable Grades
For Expansion Blind Fasteners for Hollow Section, class 8.8 is the comparable strength step. Move up when the joint preload approaches the proof load of the current class; move down when the joint is over-specified. For corrosion-critical service, switch to stainless A2 or A4.
Sizes of Expansion Blind Fasteners for Hollow Section Available in Property Class 12.9 Steel
| Installation access | Mechanism | Governed by | Capacity basis |
|---|
| one side only | sleeve flares behind the far wall | hole diameter and grip range | manufacturer test data |
| one side only | sleeve flares behind the far wall, countersunk | hole diameter and grip range | manufacturer test data |
Dimensions are independent of the material: every size above is available in Property Class 12.9 Steel.
Custom manufacturing · Made to drawing
Need this bolt in a grade that is not listed?
Grade 12 9 Steel is one of the grades the catalog describes. Where the standard stops, the drawing takes over: fine pitches, left-hand threads, partial threading, and property classes above the catalogued grade where material and heat treatment allow. Made by cold heading or hot forging.
Minimum order from 2,000 pieces; samples within 7 days of drawing approval.
Custom bolt manufacturingSend a drawing
Applications & Industries
Expansion Blind Fasteners for Hollow Section are bought for a small number of well-defined jobs. These are the ones we ship them for.
Industries that specify Expansion Blind Fasteners for Hollow Section
-
Bridge repair
Structural blind connection.
-
Structural steel
Bolted connection into hollow section.
-
Retrofit and strengthening
One-side access only.
-
Architectural steelwork
No access hole cut in the section.
-
Energy & infrastructure
Tower, pipework, switchgear and plant fixings specified for long service life and inspectable joints.
-
Maintenance & MRO
Stocked replacements matched to an existing property class, thread and finish.
Typical applications
- taking capacity from manufacturer test data
- drilling the specified hole diameter
- checking grip range against the total ply thickness
- tightening to the stated setting procedure
- joints where the property class is stated on the drawing
- clamping two machined faces to a calculated preload
Service conditions to specify against
- Marine and coastal
- Available in A4 (316) stainless for chloride exposure — coastal structures, pool halls, water treatment and deck hardware, where A2 will eventually pit.
- High load
- Supplied in ISO 898-1 property classes, so the joint can be designed to a stated proof load and tightened to a calculated torque rather than by feel.
- Torque and preload
- The joint is designed around bolt tension, so lubrication, coating and the friction coefficient all change the torque figure — state them together.
Where to use something else
- Do not treat a blind expansion fastener as a property-class bolt; its capacity comes from test data, not from a grade mark.
- Do not use a machine thread into unthreaded sheet or timber; use a tapping screw, rivet nut or insert made for that parent material.
Full application guide: where Expansion Blind Fasteners for Hollow Section are used, how to specify them, and the cases they are wrong for