Grade 8.8 Steel Internally Threaded Dowel Pin

Grade 8.8 Steel Internally Threaded Dowel Pin combine the dimensional form of GB/T 120.1 / ISO 8735 with the material properties of grade class 8.8: requires plating (zinc) for corrosion protection, magnetic, service range up to approx. +300 °C. This page summarizes the grade data, its corrosion behavior in service, the comparable grades, and the sizes supplied.

Why Choose Grade 8.8 Steel for Internally Threaded Dowel Pin — GB/T 120.1 / ISO 8735 (Series 100)

The workhorse medium-carbon alloy grade for structural joints. For internally threaded dowel pin — gb/t 120.1 / iso 8735 (series 100), this matters when requires plating (zinc) for corrosion protection is the primary requirement.

Mechanical & Physical Properties

Galvanic & Galling Considerations

For internally threaded dowel pin — gb/t 120.1 / iso 8735 (series 100) in steel, the dominant compatibility issue is hydrogen embrittlement at high property classes (10.9 and above) when electroplated. Plating must be followed by an appropriate baking treatment, or a non-electroplated finish (mechanical zinc, zinc flake) should be substituted.

Comparable Grades

For Internally Threaded Dowel Pin — GB/T 120.1 / ISO 8735 (Series 100), class 10.9 or 12.9 is the comparable strength step. Move up when the joint preload approaches the proof load of the current class; move down when the joint is over-specified. For corrosion-critical service, switch to stainless A2 or A4.

Sizes of Internally Threaded Dowel Pin — GB/T 120.1 / ISO 8735 (Series 100) Available in Grade 8.8 Steel