Choosing Housed (Pillow Block) Bearing — ISO / DIN (Series 120) in Grade 8.8 Steel comes down to matching the grade to the environment: requires plating (zinc) for corrosion protection and magnetic. Below are the properties, the full size table, and the grades worth comparing before you commit.
Why Choose Grade 8.8 Steel for Housed (Pillow Block) Bearing — ISO / DIN (Series 120)
The workhorse medium-carbon alloy grade for structural joints. For housed (pillow block) bearing — iso / din (series 120), this matters when requires plating (zinc) for corrosion protection is the primary requirement.
Mechanical & Physical Properties
| Grade designation | class 8.8 |
|---|---|
| Magnetic response | Magnetic |
| Service temperature | up to approx. +300 °C |
| Corrosion characteristic | Requires plating (zinc) for corrosion protection |
Corrosion Behavior in Service
Carbon and alloy steel housed (pillow block) bearing — iso / din (series 120) require a coating for corrosion protection. Zinc plating (with or without passivation) is the most common; hot-dip galvanizing is used for outdoor structural service; black-oxide is mainly a tarnish-prevention finish for tool-room use.
Comparable Grades
For Housed (Pillow Block) Bearing — ISO / DIN (Series 120), class 10.9 or 12.9 is the comparable strength step. Move up when the joint preload approaches the proof load of the current class; move down when the joint is over-specified. For corrosion-critical service, switch to stainless A2 or A4.
Sizes of Housed (Pillow Block) Bearing — ISO / DIN (Series 120) Available in Grade 8.8 Steel
| Shaft size (mm) | Housing length (mm) | Total height (mm) | Bolt center distance (mm) | Bolt size | Reference standard |
|---|---|---|---|---|---|
| 15 | 90 | 38 | 65 | M10 | ISO 113 / GB/T 7813 |
| 20 | 108 | 42 | 75 | M10 | ISO 113 / GB/T 7813 |
| 25 | 127 | 47 | 90 | M12 | ISO 113 / GB/T 7813 |
| 30 | 140 | 55 | 100 | M12 | ISO 113 / GB/T 7813 |
| 35 | 162 | 62 | 115 | M14 | ISO 113 / GB/T 7813 |
| 40 | 175 | 68 | 130 | M14 | ISO 113 / GB/T 7813 |
| 50 | 205 | 75 | 150 | M16 | ISO 113 / GB/T 7813 |
| 60 | 250 | 85 | 180 | M16 | ISO 113 / GB/T 7813 |
| 80 | 300 | 105 | 220 | M20 | ISO 113 / GB/T 7813 |