Skip to content

Springs · ISO / DIN

Grade 8.8 Steel Compression Spring — ISO / DIN (Series 144)

When Compression Spring — ISO / DIN (Series 144) are required in Grade 8.8 Steel, the alternative grades and the trade-offs between them matter as much as the dimensions. This page covers both, plus mechanical and corrosion data.

Why Choose Grade 8.8 Steel for Compression Spring — ISO / DIN (Series 144)

The workhorse medium-carbon alloy grade for structural joints. For compression spring — iso / din (series 144), this matters when requires plating (zinc) for corrosion protection is the primary requirement.

Mechanical & Physical Properties

Grade designationclass 8.8
Magnetic responseMagnetic
Service temperatureup to approx. +300 °C
Corrosion characteristicRequires plating (zinc) for corrosion protection

Galvanic & Galling Considerations

For compression spring — iso / din (series 144) in steel, the dominant compatibility issue is hydrogen embrittlement at high property classes (10.9 and above) when electroplated. Plating must be followed by an appropriate baking treatment, or a non-electroplated finish (mechanical zinc, zinc flake) should be substituted.

Comparable Grades

For Compression Spring — ISO / DIN (Series 144), class 10.9 or 12.9 is the comparable strength step. Move up when the joint preload approaches the proof load of the current class; move down when the joint is over-specified. For corrosion-critical service, switch to stainless A2 or A4.

Sizes of Compression Spring — ISO / DIN (Series 144) Available in Grade 8.8 Steel

Wire dia d (mm)Outer diameter De (mm)Free length Lo (mm)Rate k (N/mm)Rated force Fn (N)MaterialReference standard
0.65.2201.512Music wire / chrome siliconDIN 2098 / GB/T 23934
0.86.6252.522Music wire / chrome siliconDIN 2098 / GB/T 23934
1.08.0303.535Music wire / chrome siliconDIN 2098 / GB/T 23934
1.210.4406.055Music wire / chrome siliconDIN 2098 / GB/T 23934
1.615.2608.590Music wire / chrome siliconDIN 2098 / GB/T 23934
2.020.08018.0165Music wire / chrome siliconDIN 2098 / GB/T 23934
2.525.010028.0260Music wire / chrome siliconDIN 2098 / GB/T 23934
3.030.012045.0450Music wire / chrome siliconDIN 2098 / GB/T 23934
4.040.015090.01000Music wire / chrome siliconDIN 2098 / GB/T 23934
5.050.02001701900Music wire / chrome siliconDIN 2098 / GB/T 23934

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

Adjust the parameters in the drawing above and click "Request this configuration" to send the exact specification straight to this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (ISO / DIN)

Wire dia d (mm)Outer diameter De (mm)Free length Lo (mm)Rate k (N/mm)Rated force Fn (N)MaterialReference standard
0.65.2201.512Music wire / chrome siliconDIN 2098 / GB/T 23934
0.86.6252.522Music wire / chrome siliconDIN 2098 / GB/T 23934
1.08.0303.535Music wire / chrome siliconDIN 2098 / GB/T 23934
1.210.4406.055Music wire / chrome siliconDIN 2098 / GB/T 23934
1.615.2608.590Music wire / chrome siliconDIN 2098 / GB/T 23934
2.020.08018.0165Music wire / chrome siliconDIN 2098 / GB/T 23934
2.525.010028.0260Music wire / chrome siliconDIN 2098 / GB/T 23934
3.030.012045.0450Music wire / chrome siliconDIN 2098 / GB/T 23934
4.040.015090.01000Music wire / chrome siliconDIN 2098 / GB/T 23934
5.050.02001701900Music wire / chrome siliconDIN 2098 / GB/T 23934

Frequently Asked Questions

Can Grade 8.8 Steel replace stainless steel structurally?

No — stainless A2/A4 cannot match class 10.9 / 12.9 strength. Stainless is selected for corrosion, not raw strength.

Are Grade 8.8 Steel Compression Spring — ISO / DIN (Series 144) magnetic?

Grade 8.8 Steel Compression Spring — ISO / DIN (Series 144) are magnetic.

What corrosion resistance do Grade 8.8 Steel Compression Spring — ISO / DIN (Series 144) offer?

Grade 8.8 Steel Compression Spring — ISO / DIN (Series 144) provide requires plating (zinc) for corrosion protection with a service range of up to approx. +300 °C.

When should I move from class 8.8 to class 10.9 / 12.9 for Compression Spring — ISO / DIN (Series 144)?

Step up to class 10.9 / 12.9 when the joint preload approaches the proof load of the current class. The higher class adds preload at the same diameter, often saving size and weight.

How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.