Specifying Parallel Keys in Grade 8.8 Steel pairs the dimensional form of Parallel Keys (DIN 6885 / ISO 773) with the engineering properties of Grade 8.8 Steel. This page explains when to choose the grade, how it behaves in service, and which grades to compare it against.
Why Choose Grade 8.8 Steel for Parallel Keys
The workhorse medium-carbon alloy grade for structural joints. For parallel keys, this matters when requires plating (zinc) for corrosion protection is the primary requirement.
Mechanical & Physical Properties
| Grade designation | class 8.8 |
|---|---|
| Magnetic response | Magnetic |
| Service temperature | up to approx. +300 °C |
| Corrosion characteristic | Requires plating (zinc) for corrosion protection |
Galvanic & Galling Considerations
For parallel keys in steel, the dominant compatibility issue is hydrogen embrittlement at high property classes (10.9 and above) when electroplated. Plating must be followed by an appropriate baking treatment, or a non-electroplated finish (mechanical zinc, zinc flake) should be substituted.
Comparable Grades
For Parallel Keys, class 10.9 or 12.9 is the comparable strength step. Move up when the joint preload approaches the proof load of the current class; move down when the joint is over-specified. For corrosion-critical service, switch to stainless A2 or A4.
Sizes of Parallel Keys Available in Grade 8.8 Steel
| Shaft diameter range (mm) | Key width b (mm) | Key height h (mm) | Key length range (mm) | Shaft groove depth t1 (mm) | Hub groove depth t2 (mm) | Reference standard | Notes |
|---|---|---|---|---|---|---|---|
| 6~8 | 2 | 2 | 6~20 | 1.2 | 1.0 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 8~10 | 3 | 3 | 6~36 | 1.8 | 1.4 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 10~12 | 4 | 4 | 8~45 | 2.5 | 1.8 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 12~17 | 5 | 5 | 10~56 | 3.0 | 2.3 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 17~22 | 6 | 6 | 14~70 | 3.5 | 2.8 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 22~30 | 8 | 7 | 18~90 | 4.0 | 3.3 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 30~38 | 10 | 8 | 22~110 | 5.0 | 3.3 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 38~44 | 12 | 8 | 28~140 | 5.0 | 3.3 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 44~50 | 14 | 9 | 36~160 | 5.5 | 3.8 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 50~58 | 16 | 10 | 45~180 | 6.0 | 4.3 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 58~65 | 18 | 11 | 50~200 | 7.0 | 4.4 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 65~75 | 20 | 12 | 56~220 | 7.5 | 4.9 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 75~85 | 22 | 14 | 63~250 | 9.0 | 5.4 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 85~95 | 25 | 14 | 70~280 | 9.0 | 5.4 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 95~110 | 28 | 16 | 80~320 | 10.0 | 6.4 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 110~130 | 32 | 18 | 90~360 | 11.0 | 7.4 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 130~150 | 36 | 20 | 100~400 | 12.0 | 8.4 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 150~170 | 40 | 22 | 100~400 | 13.0 | 9.4 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 170~200 | 45 | 25 | 110~450 | 15.0 | 10.4 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 200~230 | 50 | 28 | 125~500 | 17.0 | 11.4 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 230~260 | 56 | 32 | 140~500 | 20.0 | 12.4 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 260~290 | 63 | 32 | 160~500 | 20.0 | 12.4 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 290~330 | 70 | 36 | 180~500 | 22.0 | 14.4 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 330~380 | 80 | 40 | 200~500 | 25.0 | 15.4 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 380~440 | 90 | 45 | 220~500 | 28.0 | 17.4 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |
| 440~500 | 100 | 50 | 250~500 | 31.0 | 19.5 | DIN 6885 type A / ISO 773 | Type A round ends; B square ends; C one round one square |