Dimensional data for M10 Hex Standoffs, Female-Female to Industry standard, with the installation notes for this type. Values are taken from the governing standard rather than from a general machine-thread table, because this type is not selected on one.
M10 Dimensional Row (Industry standard)
Thread size
Pitch (mm)
Across flats s (mm)
Across corners e (mm)
Length range L (mm)
Thread depth each end (mm)
Reference standard
M10
1.5
17
19.6
15~100
20
Industry standard
Common Applications for M10 Hex Standoffs, Female-Female
M10 Hex Standoffs, Female-Female are commonly specified for general engineering applications.
Technical Drawing
Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.
Sends the selected values to the quote form below.
Request a Quote
The form below follows the current technical drawing configuration. Change the drawing values above and the request details update automatically.
Dimensions & Specifications (Industry standard)
Thread size
Pitch (mm)
Across flats s (mm)
Across corners e (mm)
Length range L (mm)
Thread depth each end (mm)
Reference standard
M2.5
0.45
5
5.8
5~40
5
Industry standard
M3
0.5
5.5
6.4
5~50
6
Industry standard
M4
0.7
7
8.1
6~60
8
Industry standard
M5
0.8
8
9.2
8~80
10
Industry standard
M6
1.0
10
11.5
10~100
12
Industry standard
M8
1.25
13
15.0
12~100
16
Industry standard
M10
1.5
17
19.6
15~100
20
Industry standard
Materials & Grades
Select a material class to see the grades we supply it in. Each designation is listed with its ISO/EN, AISI/SAE, JIS and GB equivalents.
Third-party video, selected automatically for this topic. It is not produced by Engineering Hardware and is not a specification source — use the tables on this page for dimensional data.
Inside the plant
Manufactured in our own plant
This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.
01
Cold heading
Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail.
Head dimensions and under-head radius checked at set-up and per shift.
02
Thread rolling
Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch.
Go / no-go ring gauges to ISO 965 tolerance class 6g.
03
Heat treatment
Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it.
Core hardness and tensile tested per lot to ISO 898-1.
04
Surface treatment
Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list.
Coating thickness and neutral salt spray hours to ISO 9227.
Frequently Asked Questions
What is the coarse-thread pitch of M10 for Hex Standoffs, Female-Female?
For M10 the standard coarse pitch is 1.5 mm — this is the value used for Hex Standoffs, Female-Female.
What clearance and tapping drill suit M10?
Use a 11 mm clearance hole (ISO 273 medium) for through-fixing, or a 8.5 mm tapping drill for a coarse M10 thread.
How do I request a quotation?
Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.
Need a fastener quote or a spec sheet?Message our engineers on WhatsApp — send a drawing or DIN number and get pricing back fast.Start WhatsApp Chat →
This website uses only necessary and functional cookies to operate, secure, and improve basic website performance.
We do not use advertising cookies, Google Analytics, or cross-site tracking technologies.
Privacy Policy
