The M14 size of Serrated Flange Lock Nuts is dimensioned by DIN 6923. The table below gives the dimensional row from the standard, followed by the drive and the installation notes for this type.
M14 Dimensional Row (DIN 6923)
| Thread size | Pitch (mm) | Across flats s (mm) | Flange diameter dc (mm) | Total height m (mm) | Flange thickness c (mm) | Reference standard |
|---|---|---|---|---|---|---|
| M14 | 2.0 | 21 | 29.9 | 14.0 | 2.1 | DIN 6923 |
Spanner & Drive for M14 Serrated Flange Lock Nuts
Drive geometry for M14 Serrated Flange Lock Nuts is given by the row above; match the tool to the listed values.
Tightening Torque for M14
| Class 8.8 (dry, ~µ 0.125) | ≈ 135 Nm |
|---|---|
| Class 10.9 (dry, ~µ 0.125) | ≈ 190 Nm |
| Class 12.9 (dry, ~µ 0.125) | ≈ 230 Nm |
Indicative dry-joint values. Lubrication can lower the required torque by 15–25%. Always confirm against the joint design, especially when going up a strength class.
Proof Load & Strength for M14
| Tensile stress area As (ISO 898-1) | 115 mm² |
|---|---|
| Proof load, class 8.8 | 67 kN |
| Proof load, class 10.9 | 95 kN |
| Proof load, class 12.9 | 112 kN |
| Min. ultimate tensile, class 8.8 | 92 kN |
Proof load = stress area × proof stress per ISO 898-1. Design joints so the working preload stays below the proof load of the selected class.
Common Applications for M14 Serrated Flange Lock Nuts
M14 Serrated Flange Lock Nuts are commonly specified for medium-duty structural joints and motor / chassis mounting.
Mating Parts for M14
Pair M14 with the matching M14 bolt or screw, plus a M14 flat washer where required to distribute load on softer materials.
