Skip to content
info@engineeringhardware.com
About Blog Contact Sign in · Join free
WelcomeSign in / Join Request a Quote
Free Drawing Tool Post a Sourcing Request
Anchors & Concrete Fixings · Trade series (bonded anchor stud)

M20 Chemical Anchor Studs (Resin-Bonded) Dimensions

Controlling dimensions to Trade series (bonded anchor stud), with tolerances and fit.

M20 Chemical Anchor Studs (Resin-Bonded) dimensions to Trade series (bonded anchor stud): coarse thread pitch 2.5 mm.

Coarse thread pitch
2.5 mm

Figures are nominal values from the governing standard. Confirm against the tolerance class for your application before machining or ordering.

M20 Chemical Anchor Studs (Resin-Bonded) Dimensions reference image

Dimensional data for M20 Chemical Anchor Studs (Resin-Bonded) to Trade series (bonded anchor stud), with the installation notes for this type.

Values are taken from the governing standard rather than from a general machine-thread table, because this type is not selected on one.

M20 Dimensional Row (Trade series (bonded anchor stud))

Thread sizeDrill hole diameter (mm)Embedment depth (mm)Stud length (mm)Gel time at 20 u00b0C (min)Full cure at 20 u00b0C (min)Stud materialResin
M20241702601080Class 8.8 zinc / A4Epoxy

Custom manufacturing · Made to drawing

Need chemical anchor studs (resin-bonded) in a size this table does not list?

This page covers M20 chemical anchor studs (resin-bonded). Embedment depth, thread size, body length and corrosion protection are the variables; capacity remains a concrete design value, not a property of the anchor alone. Made by hot forging or thread rolling.

Minimum order from 2,000 pieces; samples within 7 days of drawing approval.

Custom anchor & concrete fixing manufacturingSend a drawing

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Dimensioned line drawing of M20 Chemical Anchor Studs (Resin-Bonded) to Trade series (bonded anchor stud). Side view and top view, drawn to the dimensions in the table below and redrawn for any size selected.
Drill hole diameter (mm)
24
Embedment depth (mm)
170
Stud length (mm)
260
Gel time at 20 u00b0C (min)
10
Full cure at 20 u00b0C (min)
80
Stud material
Class 8.8 zinc / A4
Resin
Epoxy
Sends the selected values to the quote form below.

Request a Quote

The form below follows the current technical drawing configuration. Change the drawing values above and the request details update automatically.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (Trade series (bonded anchor stud))

Thread sizeDrill hole diameter (mm)Embedment depth (mm)Stud length (mm)Gel time at 20 u00b0C (min)Full cure at 20 u00b0C (min)Stud materialResin
M81080110645Class 8.8 zinc / A4Vinylester
M101290130645Class 8.8 zinc / A4Vinylester
M1214110160645Class 8.8 zinc / A4Vinylester
M16181251901060Class 8.8 zinc / A4Vinylester
M20241702601080Class 8.8 zinc / A4Epoxy
M24282103001590Class 8.8 zinc / A4Epoxy

Materials & Grades

Select a material class to see the grades we supply it in. Each designation is listed with its ISO/EN, AISI/SAE, JIS and GB equivalents.

Stainless Steel38 Carbon Steel66 Alloy Steel41 Bearing Steel5 Spring Steel25 Aluminum and Aluminum Alloys21 Brass17 Bronze11 Copper8 Titanium and Titanium Alloys18 Nickel and Nickel Alloys22 Iron-Nickel and High-Temperature Alloys10 Tool Steel and Specialty Hardened Steel9 Structural and Construction Steel9

Stainless Steel

Austenitic Stainless Steel

  • A1 AISI 303 · SAE 303 · SUS303 · EN 1.4305 · X8CrNiS18-9
  • A2 AISI 304 · SAE 304 · SUS304 · EN 1.4301 · X5CrNi18-10 · 06Cr19Ni10
  • 304L AISI 304L · SUS304L · EN 1.4307 · X2CrNi18-9 · 022Cr19Ni10
  • 302 AISI 302 · SUS302 · EN 1.4310
  • 305 AISI 305 · SUS305 · EN 1.4303
  • A4 AISI 316 · SAE 316 · SUS316 · EN 1.4401 · X5CrNiMo17-12-2 · 06Cr17Ni12Mo2
  • 316L AISI 316L · SUS316L · EN 1.4404 · X2CrNiMo17-12-2 · 022Cr17Ni12Mo2
  • 321 AISI 321 · SUS321 · EN 1.4541 · X6CrNiTi18-10
  • 310 / 310S AISI 310 · AISI 310S · SUS310S · EN 1.4845
  • 302HQ AISI 302HQ
  • A3
  • A5
  • 347 AISI 347 · SUS347 · EN 1.4550 · X6CrNiNb18-10
  • 309 / 309S AISI 309 · AISI 309S · SUS309S

Martensitic Stainless Steel

  • AISI 410 SUS410 · EN 1.4006 · X12Cr13 · 12Cr13
  • AISI 420 SUS420J1 · SUS420J2 · EN 1.4021 · EN 1.4028 · 20Cr13 · 30Cr13
  • AISI 431 SUS431 · EN 1.4057 · X17CrNi16-2
  • C1
  • C3
  • C4
  • AISI 440A
  • AISI 440B
  • AISI 440C SUS440C · EN 1.4125

Ferritic Stainless Steel

  • AISI 430 SUS430 · EN 1.4016 · X6Cr17 · 10Cr17
  • F1
  • AISI 434
  • AISI 444

Precipitation-Hardening Stainless Steel

  • 17-4 PH AISI 630 · UNS S17400 · SUS630 · EN 1.4542 · X5CrNiCuNb16-4
  • 15-5 PH UNS S15500
  • 17-7 PH UNS S17700

Duplex and Super Duplex Stainless Steel

  • Duplex 2205 UNS S31803 · UNS S32205 · EN 1.4462
  • Super Duplex 2507 UNS S32750 · EN 1.4410
  • D2
  • D4
  • D6
  • D8
  • Lean Duplex 2101 UNS S32101
  • Super Duplex S32760 UNS S32760 · EN 1.4501

Carbon Steel

Low-Carbon Steel

  • SAE 1006
  • SAE 1008
  • SAE 1010
  • SAE 1018
  • SAE 1020
  • Q195
  • Q235
  • SAE 1012
  • SAE 1015
  • Q215
  • ML08
  • ML08Al
  • ML10
  • ML15
  • ML20
  • SWRCH6A
  • SWRCH8A
  • SWRCH10A
  • SWRCH12A
  • SWRCH15A
  • SWRCH18A

Medium-Carbon Steel

  • SAE 1035
  • SAE 1045
  • S45C
  • C45
  • SAE 1030
  • SAE 1040
  • SAE 1050
  • 30
  • 35
  • 40
  • 45
  • 50
  • S35C
  • S40C
  • S50C
  • C35
  • C40

High-Carbon Steel

  • SAE 1060
  • SAE 1070
  • 65Mn
  • SAE 1065
  • SAE 1075
  • SAE 1080
  • SAE 1085
  • SAE 1090
  • SAE 1095
  • 60
  • 65
  • 70
  • 75
  • 80
  • 85

Cold-Heading Steel

  • SWRCH22A
  • 10B21
  • SWRCH22K
  • SWRCH25K
  • SWRCH30K
  • SWRCH35K
  • SWRCH40K
  • ML20Mn
  • ML25
  • ML30
  • ML35
  • ML40
  • 15B25

Alloy Steel

Chromium Steel

  • 40Cr
  • 45Cr
  • AISI 5140
  • SAE 5140
  • AISI 5120
  • SAE 5120
  • SCr420
  • SCr440

Chromium-Molybdenum Steel

  • 35CrMo
  • 42CrMo
  • AISI 4140
  • SCM435
  • SCM440
  • 42CrMo4
  • 30CrMo
  • AISI 4130
  • SAE 4130
  • SAE 4140
  • AISI 4142
  • AISI 4145
  • SCM415
  • SCM420
  • SCM445
  • EN 1.7220
  • EN 1.7225
  • 25CrMo4
  • 34CrMo4

Nickel-Chromium-Molybdenum Steel

  • AISI 4340
  • SAE 4340
  • 40CrNiMo
  • SNCM439
  • EN 1.6511
  • 36CrNiMo4

Boron Alloy Steel

  • 10B22
  • 10B21
  • 15B21
  • 15B25
  • 20MnTiB
  • 20Mn2B
  • 35VB
  • 40MnB

Bearing Steel

Bearing Steel

  • GCr15
  • AISI 52100 SAE 52100 · UNS G52986
  • SUJ2
  • 100Cr6 EN 1.3505
  • GCr15SiMn

Spring Steel

Carbon Spring Steel

  • SAE 1065
  • SAE 1070
  • SAE 1075
  • SAE 1080
  • SAE 1095
  • 65
  • 70
  • 75
  • 80
  • 65Mn

Silicon-Manganese Spring Steel

  • 60Si2Mn
  • 60Si2MnA
  • SUP6
  • SUP7

Chromium-Vanadium Spring Steel

  • 50CrVA
  • SAE 6150
  • AISI 6150
  • SUP10

Stainless Spring Steel

  • AISI 301
  • SUS301
  • EN 1.4310
  • AISI 302
  • AISI 304
  • AISI 316
  • 17-7 PH

Aluminum and Aluminum Alloys

Commercially Pure Aluminum

  • 1050
  • 1060
  • 1070
  • 1100

2xxx Series Aluminum

  • 2024
  • 2011
  • 2014
  • 2017

5xxx Series Aluminum

  • 5052
  • 5083
  • 5754

6xxx Series Aluminum

  • 6061
  • 6061-T6
  • 6063
  • 6082
  • 6082-T6

7xxx Series Aluminum

  • 7075
  • 7075-T6
  • 7005
  • 7050
  • 7075-T73

Brass

Free-Cutting Brass

  • C36000
  • H62
  • HPb59-1
  • C3601
  • C3602
  • C3604
  • CuZn36Pb3
  • CuZn39Pb3
  • EN CW614N
  • EN CW617N
  • H65

Lead-Free Brass

  • C69300
  • C27450
  • CW510L
  • CW511L

Naval Brass

  • C46400
  • CuZn39Sn1

Bronze

Silicon Bronze

  • C65500
  • C65100
  • C65600

Phosphor Bronze

  • C51000
  • C52100
  • CuSn6
  • CuSn8

Aluminum Bronze

  • C95400
  • C95500
  • C63000
  • CuAl10Ni5Fe4

Copper

Copper

  • C11000
  • T2
  • C10100
  • C10200
  • C12200
  • T1
  • TU1
  • TU2

Titanium and Titanium Alloys

Commercially Pure Titanium

  • Grade 2
  • Grade 1
  • Grade 3
  • Grade 4
  • TA1
  • TA2
  • TA3

Alpha-Beta Titanium Alloys

  • Grade 5
  • Ti-6Al-4V
  • TC4
  • UNS R56400

Low-Interstitial Grade

  • Grade 23
  • Ti-6Al-4V ELI
  • UNS R56407

Other Titanium Fastener Alloys

  • Ti-6Al-6V-2Sn
  • Ti-6Al-2Sn-4Zr-2Mo
  • Beta-C titanium
  • Ti-10V-2Fe-3Al

Nickel and Nickel Alloys

Commercially Pure Nickel

  • Nickel 200
  • UNS N02200
  • Nickel 201
  • UNS N02201

Inconel Alloys

  • Inconel 625 UNS N06625
  • Inconel 718 UNS N07718
  • Inconel 600 UNS N06600
  • Inconel 601 UNS N06601
  • Inconel 686 UNS N06686
  • Inconel X-750 UNS N07750

Monel Alloys

  • Monel 400 UNS N04400
  • Monel K-500 UNS N05500

Hastelloy Alloys

  • Hastelloy C-276 UNS N10276
  • Hastelloy C-22 UNS N06022
  • Hastelloy B-2 UNS N10665
  • Hastelloy B-3 UNS N10675
  • Hastelloy X UNS N06002

Other Nickel Alloys

  • Alloy 20 UNS N08020
  • Alloy 625
  • Alloy 718
  • Alloy 825 UNS N08825
  • Alloy 925 UNS N09925

Iron-Nickel and High-Temperature Alloys

A286

  • A-286
  • UNS S66286
  • EN 1.4980

Invar

  • Invar 36
  • Alloy 36
  • UNS K93600
  • FeNi36

Alloy 42

  • Alloy 42
  • UNS K94100
  • FeNi42

Tool Steel and Specialty Hardened Steel

Tool Steel and Specialty Hardened Steel

  • AISI D2
  • AISI H13
  • SKD11
  • Cr12MoV
  • AISI O1
  • AISI A2
  • AISI S7
  • SKD61
  • 9CrSi

Structural and Construction Steel

Structural and Construction Steel

  • ASTM A36
  • Q235B
  • Q355B
  • S355JR
  • Q235C
  • Q355C
  • S235JR
  • S275JR
  • S355J2

Applications & Industries for M20 Chemical Anchor Studs

Where Chemical Anchor Studs are used, and what decides the specification in each case. Stocked from M8 to M24.

Industries that specify Chemical Anchor Studs

  • Close-to-edge fixings Anchors near a slab edge or at tight spacing.
  • Rebar & retrofit connections Starter bars and post-installed reinforcement.
  • Hollow block & masonry Resin with a sleeve where expansion would break the block.
  • Construction & structural Base plates, brackets and steelwork fixed to concrete.
  • Building services Suspending tray, duct, pipe and sprinkler runs from a soffit.
  • Plant installation Machines and equipment held down to a concrete floor.

Typical applications

  • bonded fixings with no expansion force in the substrate
  • hole cleaning is most of the installation quality
  • cure time roughly halves for every 10 °C above 20 °C
  • making a load-bearing threaded fixing in concrete or masonry
  • fixing a steel fixture through to a solid substrate
  • suspended services on threaded rod

Service conditions to specify against

Marine and coastal
Available in A4 (316) stainless for chloride exposure — coastal structures, pool halls, water treatment and deck hardware, where A2 will eventually pit.
Sealed joints
Used where the fixing has to keep water or air out as well as hold — the elastomer, not the fastener, decides service life.
The concrete governs
Capacity is a property of the base material and the geometry — grade, edge distance, spacing and cracked or uncracked — not of the anchor alone. Work to the anchor manufacturer's ETA or ICC-ES report.
Hole preparation
Drilled diameter, depth and cleanliness are part of the specification; an uncleaned hole is the single most common cause of a failed anchor.

Where to use something else

  • Not for a substrate the type is not qualified in — an expansion anchor near an edge or in hollow block will split it.

Full application guide: where Chemical Anchor Studs are used, how to specify them, and the cases they are wrong for

Video: M20 Chemical Anchor Studs (Resin-Bonded) Dimensions

Third-party video, selected automatically for this topic. It is not produced by Engineering Hardware and is not a specification source — use the tables on this page for dimensional data.

Inside the plant

Manufactured in our own plant

This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.

  1. Wire rod feeding into a cold heading machine
    01

    Cold heading

    Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail.

    Head dimensions and under-head radius checked at set-up and per shift.

  2. Thread rolling machine producing bolt threads
    02

    Thread rolling

    Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch.

    Go / no-go ring gauges to ISO 965 tolerance class 6g.

  3. Baskets of bolts staged for heat treatment
    03

    Heat treatment

    Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it.

    Core hardness and tensile tested per lot to ISO 898-1.

  4. Zinc plated bolts in a treatment basket
    04

    Surface treatment

    Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list.

    Coating thickness and neutral salt spray hours to ISO 9227.

Frequently Asked Questions

What is the coarse-thread pitch of M20 for Chemical Anchor Studs (Resin-Bonded)?

For M20 the standard coarse pitch is 2.5 mm — this is the value used for Chemical Anchor Studs (Resin-Bonded).

What clearance and tapping drill suit M20?

Use a 22 mm clearance hole (ISO 273 medium) for through-fixing, or a 17.5 mm tapping drill for a coarse M20 thread.

Should M20 Chemical Anchor Studs (Resin-Bonded) be tightened by torque or by angle?

For critical structural joints at M20, angle-controlled or stretch-controlled tightening is more repeatable than pure torque — the friction scatter at large diameters can dominate the torque signal.

What grip range is typical for M20 structural bolts?

Grip ranges are highly application-dependent at M20. As a guide, choose a length that gives at least 1× the thread diameter engagement in the nut plus 2–3 thread pitches projecting.

How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.