This page covers M24 Hex Slotted Castle Nut (Type 2) to GB/T 6180 / ISO 7036: the full dimensional row, hole and tool sizes, proof-load data and typical applications. All values are taken from the governing standards (GB/T 6180 / ISO 7036 together with ISO 273, ISO 724 and ISO 898-1 where applicable).
M24 Dimensional Row (GB/T 6180 / ISO 7036)
| Size | Pitch (mm) | Width across flats s (mm) | Width across corners e (mm) | Total height m (mm) | Slot width (mm) | Reference standard |
|---|---|---|---|---|---|---|
| M24 | 3.0 | 36.0 | 39.98 | 29.5 | 6.0 | ISO 7036 / GB/T 6180 |
Spanner & Drive for M24 Hex Slotted Castle Nut (Type 2) — GB/T 6180 / ISO 7036 (Series 050)
Drive geometry for M24 Hex Slotted Castle Nut (Type 2) — GB/T 6180 / ISO 7036 (Series 050) is given by the row above; match the tool to the listed values.
Common Applications for M24 Hex Slotted Castle Nut (Type 2) — GB/T 6180 / ISO 7036 (Series 050)
M24 Hex Slotted Castle Nut (Type 2) — GB/T 6180 / ISO 7036 (Series 050) are commonly specified for structural joints, flange connections and heavy equipment foundations.
Installation Tips for M24 Hex Slotted Castle Nut (Type 2) — GB/T 6180 / ISO 7036 (Series 050)
- At M24 the stretch in the bolt becomes the controlling factor — for critical joints, use angle-controlled or stretch-controlled tightening instead of pure torque.
Mating Parts for M24
Pair M24 with the matching M24 bolt or screw, plus a M24 flat washer where required to distribute load on softer materials.