Skip to content
info@engineeringhardware.com
Request a Quote

Washers · GB/T 93 / DIN 127B

M24 Spring Lock Washer Dimensions & Specifications

M24 Spring Lock Washer Dimensions & Specifications reference image

This page covers M24 Spring Lock Washer to GB/T 93 / DIN 127B: the full dimensional row, hole and tool sizes, proof-load data and typical applications. All values are taken from the governing standards (GB/T 93 / DIN 127B together with ISO 273, ISO 724 and ISO 898-1 where applicable).

M24 Dimensional Row (GB/T 93 / DIN 127B)

For bolt sizeInner diameter d1 (mm)Outer diameter d2 (mm)Width b (mm)Thickness t (mm)Reference standard
M2424.540.16.56.0GB/T 93 / DIN 127B

Spanner & Drive for M24 Spring Lock Washer — GB/T 93 / DIN 127B (Series 080)

Drive geometry for M24 Spring Lock Washer — GB/T 93 / DIN 127B (Series 080) is given by the row above; match the tool to the listed values.

Common Applications for M24 Spring Lock Washer — GB/T 93 / DIN 127B (Series 080)

M24 Spring Lock Washer — GB/T 93 / DIN 127B (Series 080) are commonly specified for high-load load-spreading on structural joints.

Installation Tips for M24 Spring Lock Washer — GB/T 93 / DIN 127B (Series 080)

  • At M24 the stretch in the bolt becomes the controlling factor — for critical joints, use angle-controlled or stretch-controlled tightening instead of pure torque.

Mating Parts for M24

A M24 flat washer pairs with a M24 bolt/screw and matching M24 nut.

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

Adjust the parameters in the drawing above and click "Request this configuration" to send the exact specification straight to this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (GB/T 93 / DIN 127B)

For bolt sizeInner diameter d1 (mm)Outer diameter d2 (mm)Width b (mm)Thickness t (mm)Reference standard
M33.16.21.00.8GB/T 93 / DIN 127B
M44.17.61.21.0GB/T 93 / DIN 127B
M55.19.21.51.2GB/T 93 / DIN 127B
M66.111.82.01.6GB/T 93 / DIN 127B
M88.114.82.52.0GB/T 93 / DIN 127B
M1010.218.13.02.5GB/T 93 / DIN 127B
M1212.221.13.53.0GB/T 93 / DIN 127B
M1414.224.14.03.5GB/T 93 / DIN 127B
M1616.227.44.54.0GB/T 93 / DIN 127B
M1818.229.45.04.5GB/T 93 / DIN 127B
M2020.233.65.55.0GB/T 93 / DIN 127B
M2424.540.16.56.0GB/T 93 / DIN 127B
M3030.550.08.07.5GB/T 93 / DIN 127B

Frequently Asked Questions

What is the coarse-thread pitch of M24 for Spring Lock Washer — GB/T 93 / DIN 127B (Series 080)?

For M24 the standard coarse pitch is 3 mm — this is the value used for Spring Lock Washer — GB/T 93 / DIN 127B (Series 080).

What clearance and tapping drill suit M24?

Use a 26 mm clearance hole (ISO 273 medium) for through-fixing, or a 21 mm tapping drill for a coarse M24 thread.

Should M24 Spring Lock Washer — GB/T 93 / DIN 127B (Series 080) be tightened by torque or by angle?

For critical structural joints at M24, angle-controlled or stretch-controlled tightening is more repeatable than pure torque — the friction scatter at large diameters can dominate the torque signal.

What grip range is typical for M24 structural bolts?

Grip ranges are highly application-dependent at M24. As a guide, choose a length that gives at least 1× the thread diameter engagement in the nut plus 2–3 thread pitches projecting.

How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.