Skip to content
info@engineeringhardware.com
Request a Quote

Washers · GB/T 852

M24 Square Channel-Steel Washer Dimensions & Specifications

M24 Square Channel-Steel Washer Dimensions & Specifications reference image

M24 Square Channel-Steel Washer are manufactured to GB/T 852 with a coarse thread pitch of 3 mm. This page lists the controlling dimensions for the M24 size — head geometry, width across flats, matching spanner size — together with the clearance hole, tapping drill and tightening torque used at assembly.

M24 Dimensional Row (GB/T 852)

For bolt sizeInner diameter d1 (mm)Outer diameter d2 (mm)Thickness t (mm)Reference standard
M2425.044.04.0ISO 7089 / GB/T 97.1

Spanner & Drive for M24 Square Channel-Steel Washer — GB/T 852 (Series 083)

Drive geometry for M24 Square Channel-Steel Washer — GB/T 852 (Series 083) is given by the row above; match the tool to the listed values.

Common Applications for M24 Square Channel-Steel Washer — GB/T 852 (Series 083)

M24 Square Channel-Steel Washer — GB/T 852 (Series 083) are commonly specified for high-load load-spreading on structural joints.

Installation Tips for M24 Square Channel-Steel Washer — GB/T 852 (Series 083)

  • At M24 the stretch in the bolt becomes the controlling factor — for critical joints, use angle-controlled or stretch-controlled tightening instead of pure torque.

Mating Parts for M24

A M24 flat washer pairs with a M24 bolt/screw and matching M24 nut.

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

Adjust the parameters in the drawing above and click "Request this configuration" to send the exact specification straight to this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (GB/T 852)

For bolt sizeInner diameter d1 (mm)Outer diameter d2 (mm)Thickness t (mm)Reference standard
M33.27.00.5ISO 7089 / GB/T 97.1
M44.39.00.8ISO 7089 / GB/T 97.1
M55.310.01.0ISO 7089 / GB/T 97.1
M66.412.01.6ISO 7089 / GB/T 97.1
M88.416.01.6ISO 7089 / GB/T 97.1
M1010.520.02.0ISO 7089 / GB/T 97.1
M1213.024.02.5ISO 7089 / GB/T 97.1
M1415.028.02.5ISO 7089 / GB/T 97.1
M1617.030.03.0ISO 7089 / GB/T 97.1
M1819.034.03.0ISO 7089 / GB/T 97.1
M2021.037.03.0ISO 7089 / GB/T 97.1
M2425.044.04.0ISO 7089 / GB/T 97.1
M3031.056.04.0ISO 7089 / GB/T 97.1
M3637.066.05.0ISO 7089 / GB/T 97.1

Frequently Asked Questions

What clearance and tapping drill suit M24?

Use a 26 mm clearance hole (ISO 273 medium) for through-fixing, or a 21 mm tapping drill for a coarse M24 thread.

Should M24 Square Channel-Steel Washer — GB/T 852 (Series 083) be tightened by torque or by angle?

For critical structural joints at M24, angle-controlled or stretch-controlled tightening is more repeatable than pure torque — the friction scatter at large diameters can dominate the torque signal.

What grip range is typical for M24 structural bolts?

Grip ranges are highly application-dependent at M24. As a guide, choose a length that gives at least 1× the thread diameter engagement in the nut plus 2–3 thread pitches projecting.

Which washer dimensions matter most for M24?

For a flat washer, the outside diameter (the bearing surface) and the thickness control how the load is spread under the head and how much elastic preload is preserved. The inside diameter must clear the bolt body but not be so large that the head bears mostly on the washer's outer rim.

How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.