Skip to content
info@engineeringhardware.com
Request a Quote

Washers · GB/T 97.2 / ISO 7090

M24 General Flat Washer Dimensions & Specifications

M24 General Flat Washer Dimensions & Specifications reference image

M24 General Flat Washer (GB/T 97.2 / ISO 7090) are specified by thread size, length and head dimensions. The M24 row from the standard is reproduced below, followed by the drill sizes, spanner size and torque values used when installing this size.

M24 Dimensional Row (GB/T 97.2 / ISO 7090)

For bolt sizeInner diameter d1 (mm)Outer diameter d2 (mm)Thickness t (mm)Reference standard
M2425.044.04.0ISO 7089 / GB/T 97.1

Spanner & Drive for M24 General Flat Washer — GB/T 97.2 / ISO 7090 (Series 088)

Drive geometry for M24 General Flat Washer — GB/T 97.2 / ISO 7090 (Series 088) is given by the row above; match the tool to the listed values.

Common Applications for M24 General Flat Washer — GB/T 97.2 / ISO 7090 (Series 088)

M24 General Flat Washer — GB/T 97.2 / ISO 7090 (Series 088) are commonly specified for high-load load-spreading on structural joints.

Installation Tips for M24 General Flat Washer — GB/T 97.2 / ISO 7090 (Series 088)

  • At M24 the stretch in the bolt becomes the controlling factor — for critical joints, use angle-controlled or stretch-controlled tightening instead of pure torque.

Mating Parts for M24

A M24 flat washer pairs with a M24 bolt/screw and matching M24 nut.

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

Adjust the parameters in the drawing above and click "Request this configuration" to send the exact specification straight to this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (GB/T 97.2 / ISO 7090)

For bolt sizeInner diameter d1 (mm)Outer diameter d2 (mm)Thickness t (mm)Reference standard
M33.27.00.5ISO 7089 / GB/T 97.1
M44.39.00.8ISO 7089 / GB/T 97.1
M55.310.01.0ISO 7089 / GB/T 97.1
M66.412.01.6ISO 7089 / GB/T 97.1
M88.416.01.6ISO 7089 / GB/T 97.1
M1010.520.02.0ISO 7089 / GB/T 97.1
M1213.024.02.5ISO 7089 / GB/T 97.1
M1415.028.02.5ISO 7089 / GB/T 97.1
M1617.030.03.0ISO 7089 / GB/T 97.1
M1819.034.03.0ISO 7089 / GB/T 97.1
M2021.037.03.0ISO 7089 / GB/T 97.1
M2425.044.04.0ISO 7089 / GB/T 97.1
M3031.056.04.0ISO 7089 / GB/T 97.1
M3637.066.05.0ISO 7089 / GB/T 97.1

Frequently Asked Questions

Which washer dimensions matter most for M24?

For a flat washer, the outside diameter (the bearing surface) and the thickness control how the load is spread under the head and how much elastic preload is preserved. The inside diameter must clear the bolt body but not be so large that the head bears mostly on the washer's outer rim.

What is the coarse-thread pitch of M24 for General Flat Washer — GB/T 97.2 / ISO 7090 (Series 088)?

For M24 the standard coarse pitch is 3 mm — this is the value used for General Flat Washer — GB/T 97.2 / ISO 7090 (Series 088).

What clearance and tapping drill suit M24?

Use a 26 mm clearance hole (ISO 273 medium) for through-fixing, or a 21 mm tapping drill for a coarse M24 thread.

Should M24 General Flat Washer — GB/T 97.2 / ISO 7090 (Series 088) be tightened by torque or by angle?

For critical structural joints at M24, angle-controlled or stretch-controlled tightening is more repeatable than pure torque — the friction scatter at large diameters can dominate the torque signal.

How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.