Skip to content
info@engineeringhardware.com
Request a Quote

Rigging Hardware · ISO / DIN

M24 Turnbuckle Dimensions & Specifications

M24 Turnbuckle Dimensions & Specifications reference image

The M24 size of Turnbuckle is dimensioned by ISO / DIN. The tables below give the dimensional row from the standard, the drill and spanner sizes that go with it, and the assembly torque per property class. The technical drawing on this page redraws to the exact values selected.

M24 Dimensional Row (ISO / DIN)

Thread sizeTotal length closed (mm)Take-up length (mm)Working load limit (kg)MaterialReference standard
M243552601800Drop-forged steel, hot-dip galvanizedDIN 1480 / GB/T 5973

Spanner & Drive for M24 Turnbuckle — ISO / DIN (Series 156)

Drive geometry for M24 Turnbuckle — ISO / DIN (Series 156) is given by the row above; match the tool to the listed values.

Common Applications for M24 Turnbuckle — ISO / DIN (Series 156)

M24 Turnbuckle — ISO / DIN (Series 156) are commonly specified for general engineering applications.

Installation Tips for M24 Turnbuckle — ISO / DIN (Series 156)

  • At M24 the stretch in the bolt becomes the controlling factor — for critical joints, use angle-controlled or stretch-controlled tightening instead of pure torque.

Technical Drawing

Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.

Sends the selected values to the quote form below.

Request a Quote

Adjust the parameters in the drawing above and click "Request this configuration" to send the exact specification straight to this form.

Request a Quotation

Specification
Business Information

Dimensions & Specifications (ISO / DIN)

Thread sizeTotal length closed (mm)Take-up length (mm)Working load limit (kg)MaterialReference standard
M61057580Drop-forged steel, hot-dip galvanizedDIN 1480 / GB/T 5973
M812590140Drop-forged steel, hot-dip galvanizedDIN 1480 / GB/T 5973
M10150110230Drop-forged steel, hot-dip galvanizedDIN 1480 / GB/T 5973
M12180135340Drop-forged steel, hot-dip galvanizedDIN 1480 / GB/T 5973
M16230170700Drop-forged steel, hot-dip galvanizedDIN 1480 / GB/T 5973
M202902151200Drop-forged steel, hot-dip galvanizedDIN 1480 / GB/T 5973
M243552601800Drop-forged steel, hot-dip galvanizedDIN 1480 / GB/T 5973
M304203203200Drop-forged steel, hot-dip galvanizedDIN 1480 / GB/T 5973

Frequently Asked Questions

What grip range is typical for M24 structural bolts?

Grip ranges are highly application-dependent at M24. As a guide, choose a length that gives at least 1× the thread diameter engagement in the nut plus 2–3 thread pitches projecting.

What is the coarse-thread pitch of M24 for Turnbuckle — ISO / DIN (Series 156)?

For M24 the standard coarse pitch is 3 mm — this is the value used for Turnbuckle — ISO / DIN (Series 156).

What clearance and tapping drill suit M24?

Use a 26 mm clearance hole (ISO 273 medium) for through-fixing, or a 21 mm tapping drill for a coarse M24 thread.

Should M24 Turnbuckle — ISO / DIN (Series 156) be tightened by torque or by angle?

For critical structural joints at M24, angle-controlled or stretch-controlled tightening is more repeatable than pure torque — the friction scatter at large diameters can dominate the torque signal.

How do I request a quotation?

Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.