This page covers M27 Flat Washers to ISO 7089 / ISO 7093. M27 is the nominal bolt size; the dimensional row below is reproduced from the product table, followed by the tolerance, material and selection notes that apply to this size.
M27 Dimensional Row (ISO 7089 / ISO 7093)
For bolt size
Inner diameter d1 min (mm)
Outer diameter d2 max (mm)
Thickness h (mm)
Reference standard
M27
28.0
50.0
4.0
ISO 7089
Common Applications for M27 Flat Washers
M27 Flat Washers are commonly specified for high-load load-spreading on structural joints.
Mating Parts for M27
A M27 flat washer pairs with a M27 bolt/screw and matching M27 nut.
Technical Drawing
Customize the parameters below — every spec field is editable, and the drawing redraws to match the values you choose. Changing the size will snap the other fields to that size's standard values; you can then override any individual value.
Sends the selected values to the quote form below.
Request a Quote
The form below follows the current technical drawing configuration. Change the drawing values above and the request details update automatically.
Dimensions & Specifications (ISO 7089 / ISO 7093)
For bolt size
Inner diameter d1 min (mm)
Outer diameter d2 max (mm)
Thickness h (mm)
Reference standard
M1.6
1.7
4.0
0.3
ISO 7089
M2
2.2
5.0
0.3
ISO 7089
M2.5
2.7
6.0
0.5
ISO 7089
M3
3.2
7.0
0.5
ISO 7089
M3.5
3.7
8.0
0.5
ISO 7089
M4
4.3
9.0
0.8
ISO 7089
M5
5.3
10.0
1.0
ISO 7089
M6
6.4
12.0
1.6
ISO 7089
M7
7.4
14.0
1.6
ISO 7089
M8
8.4
16.0
1.6
ISO 7089
M10
10.5
20.0
2.0
ISO 7089
M12
13.0
24.0
2.5
ISO 7089
M14
15.0
28.0
2.5
ISO 7089
M16
17.0
30.0
3.0
ISO 7089
M18
19.0
34.0
3.0
ISO 7089
M20
21.0
37.0
3.0
ISO 7089
M22
23.0
39.0
3.0
ISO 7089
M24
25.0
44.0
4.0
ISO 7089
M27
28.0
50.0
4.0
ISO 7089
M30
31.0
56.0
4.0
ISO 7089
M33
34.0
60.0
5.0
ISO 7089
M36
37.0
66.0
5.0
ISO 7089
M39
40.0
72.0
6.0
ISO 7089
M42
43.0
78.0
7.0
ISO 7089
M45
46.0
85.0
7.0
ISO 7089
M48
50.0
92.0
8.0
ISO 7089
M52
54.0
98.0
8.0
ISO 7089
M56
58.0
105.0
9.0
ISO 7089
M60
62.0
110.0
9.0
ISO 7089
M64
66.0
115.0
9.0
ISO 7089
M5
5.3
15.0
1.0
ISO 7093 large series
M6
6.4
18.0
1.6
ISO 7093 large series
M8
8.4
24.0
2.0
ISO 7093 large series
M10
10.5
30.0
2.5
ISO 7093 large series
M12
13.0
37.0
3.0
ISO 7093 large series
M16
17.0
50.0
3.0
ISO 7093 large series
M20
21.0
60.0
4.0
ISO 7093 large series
M24
25.0
72.0
5.0
ISO 7093 large series
Materials & Grades
Select a material class to see the grades we supply it in. Each designation is listed with its ISO/EN, AISI/SAE, JIS and GB equivalents.
Third-party video, selected automatically for this topic. It is not produced by Engineering Hardware and is not a specification source — use the tables on this page for dimensional data.
Inside the plant
Manufactured in our own plant
This part is cold-formed, threaded, heat-treated and finished in-house. The stages below are where its class and finish are actually decided.
01
Cold heading
Wire rod is drawn to size and cold-formed into blanks. Forming rather than cutting keeps the grain flow continuous around the head, which is where a bolt is most likely to fail.
Head dimensions and under-head radius checked at set-up and per shift.
02
Thread rolling
Threads are rolled between hardened dies rather than cut. Rolled threads are stronger in fatigue than cut threads and hold pitch and flank angle far more consistently across a batch.
Go / no-go ring gauges to ISO 965 tolerance class 6g.
03
Heat treatment
Quench-and-temper brings carbon and alloy steel to the property class ordered — 8.8, 10.9 or 12.9 — with the furnace charge tracked so a finished lot can be traced back to it.
Core hardness and tensile tested per lot to ISO 898-1.
04
Surface treatment
Zinc, zinc-nickel, hot-dip galvanizing, black oxide, phosphate and Dacromet, selected against the service environment rather than against the price list.
Coating thickness and neutral salt spray hours to ISO 9227.
Frequently Asked Questions
Should M27 Flat Washers be tightened by torque or by angle?
For critical structural joints at M27, angle-controlled or stretch-controlled tightening is more repeatable than pure torque — the friction scatter at large diameters can dominate the torque signal.
What grip range is typical for M27 structural bolts?
Grip ranges are highly application-dependent at M27. As a guide, choose a length that gives at least 1× the thread diameter engagement in the nut plus 2–3 thread pitches projecting.
Which washer dimensions matter most for M27?
For a flat washer, the outside diameter (the bearing surface) and the thickness control how the load is spread under the head and how much elastic preload is preserved. The inside diameter must clear the bolt body but not be so large that the head bears mostly on the washer's outer rim.
How do I request a quotation?
Use the technical drawing on this page to pick the exact configuration, then submit it with the quote form. We respond within one business day.
This website uses only necessary and functional cookies to operate, secure, and improve basic website performance.
We do not use advertising cookies, Google Analytics, or cross-site tracking technologies.
Privacy Policy
